LG 86SM9070PSA Series 86 Smart LED TV Owner’s Manual
- June 16, 2024
- LG
Table of Contents
86SM9070PSA Series 86 Smart LED TV
OWNER’S MANUAL
Safety and Reference
LED TV*sxsx d cs xcv edfcswsw
- LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV and retain it for future reference.
49SM8000PSA 55SM8000PSA 55SM8100PDA 55SM8100PSA 55SM8600PSA 55SM9000PDA
55SM9000PSA 65SM8100PDA 65SM8100PSA 65SM8600PSA 65SM9000PDA 65SM9000PSA
65SM9500PSA 75SM9070PSA 86SM9070PDA 86SM9070PSA
MFL71180702
(1907-REV02)
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
ENGLISH _index
Important Safety Instruction
· Read these instructions. · Keep these instructions. · Heed all warnings. ·
Follow all instructions. · Do not use this apparatus near water. · Clean only
with dry cloth. · Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions. · Do not install near any heat sources
such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. · Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet. · Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from the
apparatus. · Only use attachments/accessories specified by the manufacturer. ·
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
· Unplug this apparatus during lightning storms or when unused for long
periods of time. · Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
2
ENGLISH _index
Warning! Safety instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons. The symbol is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
device. WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
· TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
· Do not place the TV and/or remote control in the following environments: –
Keep the product away from direct sunlight. – An area with high humidity such
as a bathroom – Near any heat source such as stoves and other devices that
produce heat. – Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil. – An area exposed to rain or wind. – Do not expose to
dripping or splashing and do not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
– Near flammable objects such as gasoline or candles, or expose the TV to
direct air conditioning. – Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/ explosion,
malfunction or product deformation.
· Ventilation – Install your TV where there is proper ventilation. Do not
install in a confined space such as a bookcase. – Do not install the product
on a carpet or cushion. – Do not block or cover the product with cloth or
other materials while unit is plugged in.
· Take care not to touch the ventilation openings. When watching the TV for a
long period, the ventilation openings may become hot.
· Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the
device.
· Do not move the TV whilst the Power cord is plugged in. · Do not use a
damaged or loosely fitting power cord. · Be sure to grasp the plug when
unplugging the power cord. Do not
pull on the power cord to unplug the TV. · Do not connect too many devices to
the same AC power outlet as
this could result in fire or electric shock. · Disconnecting the Device from
the Main Power
– The power plug is the disconnecting device. In case of an emergency, the
power plug must remain readily accessible.
· Do not let your children climb or cling onto the TV. Otherwise, the TV may
fall over, which may cause serious injury.
· Outdoor Antenna Grounding (Can differ by country): – If an outdoor antenna
is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can come in
contact with such power lines or circuits as death or serious injury can
occur.
Be sure the antenna system is grounded to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to
grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
3
ENGLISH _index
· Grounding (Except for devices which are not grounded.) – TV with a three-
prong grounded AC plug must be connected to a three-prong grounded AC outlet.
Ensure that you connect the earth ground wire to prevent possible electric
shock.
· Never touch this apparatus or antenna during a lightning storm. You may be
electrocuted.
· Make sure the power cord is connected securely to the TV and wall socket if
not secured damage to the Plug and socket may occur and in extreme cases a
fire may break out.
· Do not insert metallic or inflammable objects into the product. If a foreign
object is dropped into the product, unplug the power cord and contact the
customer service.
· Do not touch the end of the power cord while it is plugged in. You may be
electrocuted.
· If any of the following occur, unplug the product immediately and contact
your local customer service. – The product has been damaged. – If water or
another substance enters the product (like an AC adapter, power cord, or TV).
– If you smell smoke or other odors coming from the TV – When lightning storms
or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power source is
connected to the unit if not unplugged in. · Do not use high voltage
electrical equipment near the TV (e.g., a bug zapper). This may result in
product malfunction. · Do not attempt to modify this product in any way
without written authorization from LG Electronics. Accidental fire or electric
shock can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to operate this
product. · Use only an authorized attachments / accessories approved by LG
Electronics. Otherwise, this may result in fire, electric shock, malfunction,
or product damage. · Never disassemble the AC adapter or power cord. This may
result in fire or electric shock.
· Handle the adapter carefully to avoid dropping or striking it. An impact
could damage the adapter.
· To reduce the risk of fire or electrical shock, do not touch the TV with wet
hands. If the power cord prongs are wet or covered with dust, dry the power
plug completely or wipe dust off.
· Batteries – Store the accessories (battery, etc.) in a safe location out of
the reach of children. – Do not short circuit, disassemble, or allow the
batteries to overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat.
· Moving – When moving, make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more people to carry larger
TVs. Do not press or put stress on the front panel of the TV. Otherwise, this
may result in product damage, fire hazard or injury.
· Keep the packing anti-moisture material or vinyl packing out of the reach of
children.
· Do not allow an impact shock, any objects to fall into the product, and do
not drop anything onto the screen.
· Do not press strongly upon the panel with a hand or a sharp object such as a
nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
· Cleaning – When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not
clean your TV with chemicals including glass cleaner, any type of air
freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner,
benzene, alcohol etc., which can damage the product and/or its panel.
Otherwise, this may result in electric shock or product damage.
4
ENGLISH _index
Preparing
Optional Extras
· When the TV is turned on for the first time after being shipped
from the factory, initialization of the TV may take approximately
one minute.
· Image shown may differ from your TV.
· Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
· The available menus and options may differ from the input source
or product model that you are using.
· New features may be added to this TV in the future.
· The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
· The items supplied with your product may vary depending upon
the model.
· Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
· For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width.
· Use an extension cable that supports
if the USB cable or
USB flash drive does not fit into your TV’s USB port.
Optional extras can be changed or modified for quality improvement without any
notification. Contact your dealer for buying these items. These devices work
only with certain models. The model name or design may be changed due to the
manufacturer’s circumstances or policies.
Magic Remote Control
AN-MR19BA Check whether your TV model supports Bluetooth in the Wireless
Module Specification to verify whether it can be used with the Magic Remote.
Wall Mounting Bracket
(Depending upon model) Make sure to use screws and wall mount bracket that
meet the VESA standard. Standard dimensions for the wall mount kits are
described in the following table.
B
B * A <= 10 mm
A
A
- B <= 18 mm
· Use a certified cable with the HDMI logo attached. If you do not use a
certified HDMI cable, the screen may not display or a connection
error may occur. · Recommended HDMI cable types (3 m or less)
– Ultra High-Speed HDMI®/TM cable
Model
A B
49SM80*
VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket
Model
VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket
200 x 200 M6 4 LSW240B MSW240 65SM81 65SM86 65SM90 65SM95 300 x 300 M6 4 OLW480B
55SM80 55SM81 55SM86 55SM90 300 x 300 M6 4 OLW480B MSW240
75/86SM90*
600 x 400 M8 4 LSW640B
5
ENGLISH _index
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being
scratched or damaged and for safe transportation regardless of its type and
size.
· It is recommended to move the TV in the box or packing material that the TV
originally came in.
· Before moving or lifting the TV, disconnect the power cord and all cables.
· When holding the TV, the screen should face away from you to avoid damage.
· Avoid touching the screen at all times, as this may result in damage to the
screen.
· Do not place the product on the floor with its front facing down without
padding. Failure to do so may result in damage to the screen.
· When attaching the stand to the TV set, place the screen facing down on a
cushioned table or flat surface to protect the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table. · Leave a minimum
of 10 cm space from the wall for proper
ventilation.
· Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.
10 cm
10 cm
10 cm
10 cm
10 cm
· Use at least two people to move a large TV. · When transporting the TV by
hand, hold the TV as shown in the
following illustration.
· When transporting the TV, do not expose the TV to jolts or excessive
vibration.
· When transporting the TV, keep the TV upright; never turn the TV on its side
or tilt towards the left or right.
· When handling the TV, be careful not to damage the protruding buttons.
(Depending upon model)
2 Connect the power cord to a wall outlet.
· Do not apply foreign substances (oils, lubricants, etc.) to the screw parts
when assembling the product. (Doing so may damage the product.)
· If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which may
cause injury.
· Do not use any unapproved items to ensure the safety and lifespan of the
product.
· Any damages or injuries by using unapproved items are not covered by the
warranty.
· Make sure that the screws are fastened tightly. (If they are not fastened
securely enough, the TV may tilt forward after being installed.)
· Do not fasten the screws with excessive force otherwise they may strip and
become loose.
6
ENGLISH _index
Securing TV to the Wall
Mounting to the Wall
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the
TV. · If there are bolts inserted at the eye-bolts position, remove the bolts
first.
2 Mount the wall brackets with the bolts to the wall. Match the location of
the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the flat surface.
· Use a platform or cabinet that is strong and large enough to support the TV
securely.
· Brackets, bolts, and ropes are optional. You can obtain additional
accessories from your local dealer.
An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.
10 cm
10 cm
10 cm
10 cm
10 cm
(Depending upon model)
· Remove the stand before installing the TV on a wall mount by performing the
stand attachment in reverse.
· For more information of screws and wall mount bracket, refer to the Separate
Purchase.
· If you intend to mount the product to a wall, attach VESA standard mounting
interface (optional parts) to the back of the product. When you install the
set to use the wall mounting bracket (optional parts), fix it carefully so as
not to drop.
· When mounting a TV on the wall, make sure not to install the TV by hanging
the power and signal cables on the back of the TV.
· Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
7
ENGLISH _index
Connections
You can connect various external devices to the TV. For more information on
external device’s connection, refer to the manual provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the
following. The illustrations may differ from the actual items and an RF cable
is optional.
· Make sure not to bend the copper wire of the RF cable.
Copper wire
(Depending upon model) · Do not use a sharp object when you detached the cable
cover. This could damage the cable or the cabinet. It may also cause personal
harm, (Depending upon model).
· When installing the wall mounting bracket, it is recommended to cover the
stand hole using tape, in order to prevent the influx of dust and insects,
(Depending upon model).
· Complete all connections between devices, and then connect the power cord to
the power outlet to prevent damage to your TV.
· To improve the picture quality in a poor signal area, purchase a signal
amplifier.
· Use a signal splitter to use 2 TVs or more. · If the antenna is not
installed properly, contact your dealer for
assistance. · This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts
directly because the related standards have not been confirmed.
Other connections
Connect your TV to external devices. For the best picture and audio quality,
connect the external device and the TV with the HDMI cable.
Stand hole
HDMI
· When connecting the HDMI cable, the product and external devices should be
turned off and unplugged.
· Supported HDMI Audio format (Depending upon model): DTS (44.1 kHz / 48 kHz /
88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz
/ 192 kHz), True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz /
44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
8
ENGLISH _index
· ( ) [Picture] [Additional Settings] [HDMI ULTRA HD Deep Color] – On :
Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) – Off : Support 4K @ 50/60 Hz 8
bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep Color, your
picture may be clearer. However, if the device doesn’t support it, it may not
work properly. In that case, change the TV’s [HDMI ULTRA HD Deep Color]
setting to off. – This feature is available only on certain models which
support
HDMI ULTRA HD Deep Color.
Using Button
You can simply operate the TV functions, using the button.
External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and other
external devices.
· If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder or VCR. For
more information about recording, refer to the manual provided with the
connected device.
· The external device connections shown may differ slightly from illustrations
in a manual.
· Connect external devices to the TV regardless about the order of the TV
port.
· If you connect a gaming device to the TV, use the cable supplied with the
gaming device.
· Refer to the external equipment’s manual for operating instructions.
· In PC mode, there may be noise associated with the resolution, vertical
pattern, contrast or brightness. If noise is present, change the PC output to
another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the [PICTURE] menu until the picture is clear.
Depending upon the graphics card, some resolution settings may not allow the
image to be positioned on the screen properly.
· Some USB Hubs may not work. If a USB device connected through a USB Hub is
not detected, connect it directly to the USB port on the TV.
· When connecting via a wired LAN, it is recommended to use a CAT 7 cable.
Basic functions
Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu
Selection (Press and Hold3)
1 All running apps will close, and any recording in progress will stop. 2 You
can access and adjust the menu by pressing the button when
TV is on. 3 You can use the function when you access menu control.
Adjusting the menu When the TV is turned on, press the button one time. You
can adjust the Menu items using the button.
Turns the power off. Changes the input source.
Adjusts the volume level.
Scrolls through the saved channels.
9
ENGLISH _index
Using Magic Remote Control
(Depending upon model) The descriptions in this manual are based on the
buttons on the remote control. Please read this manual carefully and use the
TV correctly. When the message [Magic Remote battery is low. Please change the
battery.] is displayed, replace the batteries. To install batteries, open the
battery cover, replace batteries (1.5 V AA) matching the and ends to the label
inside the compartment, and close the battery cover. Be sure to point the
magic remote toward the remote control sensor on the TV. To remove the
batteries, perform the installation actions in reverse. This remote uses
infrared light. When in use, it should be pointed in the direction of the TV’s
remote sensor.
1
1
1
To use the button, press and hold for more than 1 second.
(POWER) Turns the TV on or off.
(STB POWER) You can turn your set-top box on or off by adding
the settop box to the universal remote control for your TV. Number buttons
Enters numbers.
Accesses the [QUICK HELP]. (DASH) Inserts a between numbers such as 2-1 and
2-2. Accesses the saved channel list. (MORE ACTIONS) Displays more remote
control functions.
Edits QUICK ACCESS
– QUICK ACCESS is a feature that allows you to enter a specified app or Live
TV directly by pressing and holding the number buttons. SAP (Secondary
Audio Program) feature can also be
enabled by pressing the button. Adjusts the volume level.
(MUTE) Mutes all sounds. (MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved channels. ** (Voice recognition) Network connection
is required to use the
voice recognition function. Once the voice display bar is activated on
the TV screen, press and hold the button and speak your command
out loud. (HOME) Accesses the Home menu. (HOME) Shows the previous history. (Q. Settings) Accesses the Quick Settings. (Q. Settings) Displays the [All Settings] menu. Wheel (OK) Press the center of button to select a menu. You
can change channels by using button. (up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press
buttons while
the pointer is in use, the pointer will disappear from the screen and
Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and
right. (BACK) Returns to the previous level. ** (BACK) Clears on-screen displays and returns to last input
viewing. Displays the program event according to time scheduler.
1 Streaming Service buttons Connects to the Video Streaming
Service. (INPUT) Changes the input source. ** (INPUT) Accesses the [HOME DASHBOARD]. , , , These access special functions in some
menus. ** Runs the record function.
, (Control buttons) Controls media contents.
(Some buttons and services may not be provided depending upon models or regions.)
10
ENGLISH _index
Registering Magic Remote Control User Guide
How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic
Remote at your TV and press the Wheel (OK)
on the remote control. * If the TV fails to register the Magic Remote, try
again after turning the
TV off and back on.
How to deregister the Magic Remote Control
Press the (BACK) and (HOME) buttons at the same time, for five seconds, to
unpair the Magic Remote with your TV.
- Pressing and holding the button will let you cancel and reregister Magic Remote at the same time.
· Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
· Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
· This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
· Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.
For more information about this TV, read the USER GUIDE embedded in the
product. (Depending upon model)
· To open the USER GUIDE ( ) [General] [About This TV] [User Guide]
Troubleshooting
Cannot control the TV with the remote control. · Check if anything such as
tape has been placed over the receiver. · Check if there is any obstacle
between the product and the remote control. · Replace the batteries with new
fresh ones.
No image display and no sound is produced. · Check if the product is turned
on. · Check if the power cord is connected to a wall outlet. · Check if there
is a problem in the wall outlet by connecting other products.
The TV turns off suddenly. · Check the power control settings. The power
supply may be interrupted. · Check if the auto-off function is activated in
the settings menu. · If there is no signal while the TV is on, the TV will
turn off automatically after 15 minutes of inactivity.
11
ENGLISH _index
Abnormal Display · If the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However, they have no adverse effect on the TV’s
performance. Avoid touching the LCD screen or holding your finger(s) against
it for long periods of time. Doing so may produce some temporary distortion
effects on the screen. · This panel is an advanced product that contains
millions of pixels. In a very few cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots are deactivated pixels and do not
affect the performance and reliability of the TV. · Displaying a still image
for a prolonged period of time may cause an image sticking. Avoid displaying a
fixed image on the TV screen for a extended length of time.
Generated Sound · Cracking noise A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal
deformation is required. · Electrical circuit humming/panel buzzing A low
level noise is generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending upon the
product. This generated sound does not affect the performance and reliability
of the product.
· When cleaning the product, be careful not to allow any liquid or foreign
objects to enter the gap between the upper, left or right side of the panel
and the guide panel, (Depending upon model).
· Make sure to wring any excess water or cleaner from the cloth.
· Do not spray water or cleaner directly onto the TV screen. · Make sure to
spray just enough of water or cleaner onto a
dry cloth to wipe the screen.
12
ENGLISH _index
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
(Depending upon country)
Model
Television system
Program Coverage (Band)
External antenna impedance
Broadcasting Specifications
For 49SM8000PS, 55SM8000PS, 55SM8100PS, 55SM8600PS, 55SM9000PS, 65SM8100PS, 65SM8600PS, 65SM9000PS, 65SM9500PS, 75SM9070PS, 86SM9070PS series
For 55SM8100PD, 55SM9000PD, 65SM8100PD, 65SM9000PD, 86SM9070PD series
Digital
Analog
Digital
Analog
SBTVD
NTSC / PAL-N/PAL-M
DVB-T/T21
NTSC / PAL-N/PAL-M
VHF 2-13 UHF 14-69 DTV 2-69 CATV 1-135
VHF 2-13 UHF 14-69 DTV 2-69 CATV 1-125
75
1 Depending upon country
Wireless module(LGSBWAC92)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range
Output Power (Max.)
2400 to 2483.5 MHz 5150 to 5725 MHz 5725 to 5850 MHz
18 dBm 18 dBm 18 dBm
Bluetooth
Frequency range
Output power(Max.)
2400 to 2483.5 MHz
8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. FCC ID: BEJLGSBWAC92 IC: 2703H-LGSBWAC92
13
ENGLISH _index
Operating Temperature Operating Humidity Storage Temperature Storage Humidity
Environment condition
0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 %
· The energy information provided on the product is shown in accordance with
the applicable regulations of each respective country, (Depending upon the
country).
– The Energy consumption was measured in accordance with IEC 62087. · The
actual energy consumption depends on the usage environment, (Example: content
watched, TV settings, etc.).
14
ENGLISH _index
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com. In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download. LG Electronics
will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping, and
handling) upon email request to opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this product. This offer is
valid to anyone in receipt of this information.
Licenses
Regulatory
WARNING!
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
· Using cabinets or stands recommended by the manufacturer of the television
set.
· Only using furniture that can safely support the television set. · Ensuring
the television set is not overhanging the edge of the
supporting furniture. · Not placing the television set on tall furniture (for
example,
cupboards or bookcases) without anchoring both the furniture and the
television set to a suitable support. · Not placing the television set on
cloth or other materials that may be located between the television set and
supporting furniture. · Educating children about the dangers of climbing on
furniture to reach the television set or its controls. If your existing
television set is being retained and relocated, the same considerations as
above should be applied.
Symbols
(Magic Remote supported models only)
Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refer to “ON” (power). Refers to dangerous voltage.
15
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.
SMART TV Quick Setup Guide
- Image shown may differ from your TV. Image shown on a PC or mobile phone may vary depending on the OS(Operating System). App icon positions may vary on the platform, depending on the software version.
Network Settings
1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote.
()
All Settings
4 If the connection is successful, the “[Connected to Internet]” is displayed.
Picture CONNECTION
Sound Channels Connection General Safety Accessibility
TV Name
Wired Connection (Ethernet) Not Connected Wi-Fi Connection Connected to
Internet Device Connector Mobile TV on Screen Share Settings HDMI Device
Settings
2 Select the [Connection] [Wired Connection(Ethernet)] or [Wi-Fi Connection].
Picture CONNECTION
Sound Channels Connection General Safety Accessibility
TV Name
Wired Connection (Ethernet) Not Connected Wi-Fi Connection Not Connected
Device Connector Mobile TV on Screen Share Settings HDMI Device Settings
3 The device automatically tries to connect to the network available (wired network first). When you select the [Wi-Fi Connection], the network list available is displayed. Choose the network you wish to use.
Picture WI-FI CONNECTION Connection / Sound
Channels
Connection
General Safety Accessibility
Add a Hidden Wireless Network Connect via WPS PBC Connect via WPS PIN Advanced Wi-Fi Settings
For wireless AP (Router) that have the symbol, you need to enter the security key.
You can check the status of connection in [Advanced Wi-Fi settings].
Picture WI-FI CONNECTION Connection / Sound
Channels
Connection
General Safety Accessibility
Add a Hidden Wireless Network Connect via WPS PBC Connect via WPS PIN Advanced Wi-Fi Settings
www.lg.com
Troubleshooting Network Problems
1 Press the (Settings) on the remote to access the settings menu. Point the ( ) [All Settings] icon and select by pressing the Wheel (OK) button on the remote.
Check the AP (Router) or consult your Internet service provider.
()
All Settings
2 Select the [Connection] [Wired Connection (Ethernet)] or [Wi-Fi Connection] [Advanced Wi-Fi Settings].
Picture CONNECTION
Sound Channels Connection General Safety Accessibility
TV Name
Wired Connection (Ethernet) Not Connected Wi-Fi Connection Not Connected
Device Connector Mobile TV on Screen Share Settings HDMI Device Settings
Picture WI-FI CONNECTION Connection / Sound
Channels
Connection
General Safety Accessibility
Add a Hidden Wireless Network Connect via WPS PBC Connect via WPS PIN Advanced Wi-Fi Settings
Follow the instructions below that correlate to your network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV, AP (Router).
2 Power off and power on the TV, AP (Router). 3 If you are using a static IP,
enter the IP directly. 4 Contact internet service provider or AP (Router)
company.
When X appears next to Gateway: 1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds. 2 Initialize (Reset) the AP (Router). 3
Contact internet service provider or AP (Router)
company.
When X appears next to DNS: 1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds. 2 Initialize (Reset) the AP (Router). 3 Check
that the MAC address of the TV/AP (Router)
is registered with your Internet service provider. (The MAC address displayed
on the right pane of the network status window should be registered with your
Internet service provider.) 4 Check the AP (Router) manufacturer’s website to
make sure your router has the latest firmware version installed.
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both
devices must on the same local network.
2 Install/run the app for sharing content on your smartphone (It’s called LG
TV Plus on LG phones). 3 Enable your smartphone to share content files with
other devices. 4 Select the file type you want to play (movie, audio or
photo). 5 Select a movie, music or photo file to play on the TV. 6 Play the
media file to view and enjoy it on your TV.
Updating the TV Firmware
- If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.
1 (Settings) ( )[All Settings] [General] [About This TV] [CHECK FOR UPDATES] 2 After checking the version of the software, update it.
If you check the “[Allow Automatic Updates]”, you can update the software automatically.
GENERAL Picture
Sound Channels Connection General Safety Accessibility
Language Location Time & Date Timers AI Service Account Management Eco Mode About This TV Additional Settings
Picture Sound Channels
ABOUT THIS TV
General /
Software Version Allow Automatic Updates
Connection
General Safety Accessibility
CHECK FOR UPDATES
TV Information
Notifications User Guide Quick Help
Please call LG Customer Service if you experience any problems.
Guide d’installation rapide SMART TV
- L’image affichée peut être différente de celle qui s’affiche sur votre téléviseur. L’image affichée sur un ordinateur ou un téléphone mobile peut varier en fonction du système
d’exploitation (SE). Les emplacements de l’icône de l’application peuvent varier sur la plateforme, en fonction de la version
du logiciel.
Paramètres du réseau
1 Appuyez sur le bouton (Paramètres) de la télécommande pour accéder au menu des paramètres. Visez l’icône ( ) [Tous les paramètres] et sélectionnez-la en appuyant sur le bouton Molette (OK) de la télécommande.
()
Tous les paramètres
2 Sélectionnez [Connexion] [Connexion filaire (Ethernet)] ou [Connexion Wi- Fi].
Image CONNEXION
Son Chaînes Connexion Général Sécurité Accessibilité
NOM DE LA TV
Connexion filaire (Ethernet) Non connecté Connexion Wi-Fi Non connecté
Connecteur de périphérique Télé mobile active Paramètres du Partage d’écran
Paramètres du périphérique HDMI
3 L’appareil tente automatiquement de se connecter au réseau disponible (réseau filaire en premier). Lorsque vous sélectionnez la [Connexion Wi-Fi], la liste des réseaux disponibles s’affiche. Choisissez le réseau que vous voulez utiliser.
Image CONNEXION WI-FI Connexion / Son
Chaînes
Connexion
Général Sécurité Accessibilité
Ajoutez un réseau sans fil caché Se connecter via WPS-PBC Se connecter via PIN WPS Paramètres Wi-Fi avancés
Pour les points d’accès sans fil (routeur) affichant le symbole , vous devez saisir le code de sécurité.
4 Lorsque la connexion est établie, la mention « [Connecté à Internet] » est affichée.
Image CONNEXION
Son Chaînes Connexion Général Sécurité Accessibilité
NOM DE LA TV
Connexion filaire (Ethernet) Non connecté Connexion Wi-Fi Connecté à Internet
Connecteur de périphérique Télé mobile active Paramètres du Partage d’écran
Paramètres du périphérique HDMI
Vous pouvez vérifier l’état de la connexion dans [Paramètres Wi-Fi avancés].
Image CONNEXION WI-FI Connexion / Son
Chaînes
Connexion
Général Sécurité Accessibilité
Ajoutez un réseau sans fil caché Se connecter via WPS-PBC Se connecter via PIN WPS Paramètres Wi-Fi avancés
www.lg.com
Dépannage des problèmes de réseau
1 Appuyez sur le bouton (Paramètres) de la télécommande pour accéder au menu des paramètres. Visez l’icône ( ) [Tous les paramètres] et sélectionnez-la en appuyant sur le bouton Molette (OK) de la télécommande.
Vérifiez le point d’accès (routeur) ou consultez votre fournisseur d’accès à Internet.
()
Tous les paramètres
2 Sélectionnez [Connexion] [Connexion filaire (Ethernet)] ou [Connexion Wi-Fi] [Paramètres Wi-Fi avancés].
Image CONNEXION
Son Chaînes Connexion Général Sécurité Accessibilité
NOM DE LA TV
Connexion filaire (Ethernet) Non connecté Connexion Wi-Fi Non connecté
Connecteur de périphérique Télé mobile active Paramètres du Partage d’écran
Paramètres du périphérique HDMI
Image CONNEXION WI-FI Connexion / Son
Chaînes
Connexion
Général Sécurité Accessibilité
Ajoutez un réseau sans fil caché Se connecter via WPS-PBC Se connecter via PIN WPS Paramètres Wi-Fi avancés
Suivez les instructions ci-dessous qui correspondent à l’état de votre réseau.
Vérifiez le téléviseur ou le point d’accès (routeur).
Lorsqu’un « X » s’affiche à côté du téléviseur :
1 Vérifiez l’état de la connexion du téléviseur ou du point d’accès (routeur).
2 Éteignez et rallumez le téléviseur ou le point d’accès (routeur).
3 Si vous utilisez une adresse IP statique, saisissezla directement.
4 Communiquez avec le fournisseur d’accès à Internet ou avec le fabricant du
point d’accès (routeur).
Lorsqu’un « X » s’affiche à côté du point d’accès (routeur):
1 Débranchez le cordon d’alimentation du point d’accès (routeur) et essayez de
le rebrancher après 5 secondes.
2 Initialisez (ou réinitialisez) le point d’accès (routeur).
3 Communiquez avec le fournisseur d’accès à Internet ou avec le fabricant du
point d’accès (routeur).
Lorsqu’un « X » s’affiche à côté du DNS :
1 Débranchez le cordon d’alimentation du point d’accès (routeur) et essayez de
le rebrancher après 5 secondes.
2 Initialisez (ou réinitialisez) le point d’accès (routeur).
3 Vérifiez que l’adresse MAC du téléviseur/point d’accès (routeur) est
enregistrée auprès de votre fournisseur d’accès à Internet. (L’adresse MAC
affichée dans le volet droit de la fenêtre d’état du réseau doit être
enregistrée auprès de votre fournisseur d’accès Internet.)
4 Consultez le site Web du fabricant de votre point d’accès (routeur) afin de
vérifier que celui-ci exécute la dernière version du microprogramme.
Connexion SmartShare à un téléphone intelligent
1 Vérifiez que l’option Wi-Fi est activée sur votre téléphone intelligent.
Pour utiliser SmartShare, les deux appareils doivent être connectés sur le
même réseau local.
2 Installez ou exécutez l’application prévue pour partager du contenu sur
votre téléphone intelligent (sur les téléphones LG, il s’agit de LG TV Plus).
3 Activez l’option sur votre téléphone intelligent afin de partager des
fichiers avec d’autres appareils.
4 Sélectionnez le type de fichier que vous voulez lire (film, musique ou
photo). 5 Sélectionnez un fichier de film, de musique ou de photo à lire. 6
Lisez-le pour l’afficher ou l’écouter sur votre téléviseur.
Mise à jour du micrologiciel du téléviseur
- S’il s’agit de la première fois que le téléviseur est allumé depuis sa sortie d’usine, l’initialisation peut prendre quelques minutes.
1 (Paramètres) ( ) [Tous les paramètres] [Général] [À propos de ce téléviseur] [Rechercher des mises à jour] 2 Vérifiez d’abord la version du logiciel, puis mettez-le à jour. Si vous cochez la case « [Autoriser les mises à jour automatiques] », vous pouvez mettre à jour le logiciel automatiquement.
Image GÉNÉRAL
Son Chaînes Connexion Général Sécurité Accessibilité
Langue Emplacement Heure et date Minuteries Service d’IA Gestion de compte Mode éco. À propos de ce téléviseur Réglages supplémentaires
Image À PROPOS DE CE TÉLÉVISEUR Général / Son
Version du logiciel Chaînes Autoriser les mises à jour automatiques
Connexion
Général Sécurité Accessibilité
RECHERCHER DES MISES À JOUR
Renseignements sur le téléviseur
Notifications Guide d’utilisation Aide rapide
Communiquez avec le service à la clientèle de LG si vous constatez le moindre problème.
Guía de configuración rápida del SMART TV
- La imagen que se muestra puede ser diferente a su televisor. La imagen que se muestra en una PC o un teléfono móvil puede variar según el sistema operativo
(sistema operativo). Las posiciones de los íconos de la aplicación pueden variar en la plataforma según la versión del software.
Configuración de la red
1 Presione el botón (Configuración) del control remoto para acceder al menú Configuración. Vaya al ícono ( ) [Todos los ajustes] y selecciónelo con el botón Rueda (Aceptar) del control remoto.
()
Todos los ajustes
2 Seleccione [Conexión] [Conexión cableada (Ethernet)] o [Conexión Wi-Fi].
Imagen CONEXIÓN
Audio
Nombre de la TV
Canales Conexión General Seguridad Accesibilidad
Conexión cableada (Ethernet) No conectado
Conexión Wi-Fi No conectado
Conector de Dispositivo
TV móvil activo
Configuraciones de Screen Share
Configuración de dispositivo HDMI
3 El dispositivo intenta conectarse automáticamente a la red disponible (primero, la red cableada). Cuando selecciona [Conexión Wi-Fi], se muestra la lista de redes disponibles. Seleccione la red que desea usar.
4 Si la conexión es exitosa, se muestra “[Conectado a Internet]”.
Imagen CONEXIÓN
Audio Canales Conexión General Seguridad Accesibilidad
Nombre de la TV
Conexión cableada (Ethernet) No conectado Conexión Wi-Fi Conectado a Internet
Conector de Dispositivo TV móvil activo Configuraciones de Screen Share
Configuración de dispositivo HDMI
Puede verificar el estado de conexión en [Configuración avanzada de Wi-Fi].
Imagen CONEXIÓN WI-FI
Audio
Conexión /
Canales
Conexión
General Seguridad Accesibilidad
Agregar una red inalámbrica oculta Conectarse a través de WPS PBC Conectar mediante WPS PIN Configuración avanzada de Wi-Fi
Imagen CONEXIÓN WI-FI
Audio
Conexión /
Canales
Conexión
General Agregar una red inalámbrica oculta Conectarse a través de WPS PBC
Seguridad Conectar mediante WPS PIN Configuración avanzada de Wi-Fi
Accesibilidad
Para el AP inalámbrico (enrutador) que tiene el símbolo , debe ingresar la clave de seguridad.
www.lg.com
Resolución de problemas de red
1 Presione el botón (Configuración) del control remoto para acceder al menú Configuración. Vaya al ícono ( ) [Todos los ajustes] y selecciónelo con el botón Rueda (Aceptar) del control remoto.
Revise el AP (enrutador) o consulte a su proveedor de servicios de Internet.
()
Todos los ajustes
2 Seleccione [Conexión] [Conexión cableada (Ethernet)] o [Conexión Wi-Fi] [Configuración avanzada de Wi-Fi].
Imagen CONEXIÓN
Audio
Nombre de la TV
Canales Conexión General Seguridad Accesibilidad
Conexión cableada (Ethernet) No conectado
Conexión Wi-Fi No conectado
Conector de Dispositivo
TV móvil activo
Configuraciones de Screen Share
Configuración de dispositivo HDMI
Imagen CONEXIÓN WI-FI Conexión / Audio
Canales
Conexión
General Seguridad Accesibilidad
Agregar una red inalámbrica oculta Conectarse a través de WPS PBC Conectar mediante WPS PIN Configuración avanzada de Wi-Fi
Siga las instrucciones a continuación que se correlacionan con el estado de su red.
Revise el televisor o el AP (enrutador).
Cuando aparece X al lado del televisor:
1 Revise el estado de conexión del televisor, AP (enrutador).
2 Apague y encienda el televisor, AP (enrutador).
3 Si está utilizando una IP estática, ingrese la IP directamente.
4 Comuníquese con el proveedor de servicios de Internet o la empresa de AP
(enrutador).
Cuando aparece X junto a la puerta de enlace: 1 Desenchufe el cable de
alimentación del AP
(enrutador) e intente conectarlo después de 5 segundos. 2 Inicialice
(restablezca) el AP (enrutador). 3 Comuníquese con el proveedor de servicios
de Internet o la empresa de AP (enrutador).
Cuando aparece X junto a DNS: 1 Desenchufe el cable de alimentación del AP
(enrutador) e intente conectarlo después de 5 segundos. 2 Inicialice
(restablezca) el AP (enrutador). 3 Verifique que la dirección MAC del TV/AP
(enrutador) esté registrada con su proveedor de servicios de Internet. (La
dirección MAC que se muestra en el panel derecho de la ventana de estado de
red debe registrarse con su proveedor de servicios de Internet.) 4 Consulte el
sitio web del fabricante del AP (enrutador) para asegurarse de que su
enrutador tenga instalada la última versión de firmware.
Conexión de SmartShare a un teléfono inteligente
1 Verifique que la conexión Wi-Fi esté activada en su teléfono inteligente.
Para utilizar SmartShare, ambos dispositivos deben estar en la misma red
local.
2 Instale y ejecute la aplicación para compartir contenido en su teléfono
inteligente (se llama LG TV Plus en teléfonos LG).
3 Permita que su teléfono inteligente comparta archivos de contenido con otros
dispositivos. 4 Seleccione el tipo de archivo que desea reproducir (película,
audio o foto). 5 Seleccione una película, música o archivo de fotografía para
reproducir en el televisor. 6 Reproduzca el archivo multimedia para verlo y
disfrutarlo en su televisor.
Actualización del firmware del televisor
- Cuando el televisor se enciende por primera vez después de que se envía de fábrica, la inicialización del televisor puede tardar unos minutos.
1 (Configuración) ( ) [Todos los ajustes] [General] [Acerca de este TV] [BUSCAR ACTUALIZACIONES] 2 Después de verificar la versión del software, actualícela. Si marca la opción “[Permitir Actualizaciones Automáticas]”, puede actualizar el software automáticamente.
Imagen GENERAL
Audio
Idioma
Canales
Ubicación Hora y Fecha
Conexión Temporizadores
General
Servicio AI Administración de Cuentas
Modo Eco Seguridad
Acerca de este TV
Configuraciones adicionales Accesibilidad
Imagen Audio Canales
ACERCA DE ESTE TV
General /
Versión de software Permitir Actualizaciones Automáticas
Conexión
BUSCAR ACTUALIZACIONES
Información del TV General
Notificaciones Seguridad Guía del usuario
Ayuda rápida Accesibilidad
Comuníquese con el Servicio de atención al cliente de LG si tiene algún problema.
Guia Rápido de Configurações SMART TV
- As imagens apresentadas podem ser diferentes da sua TV. As imagens do PC ou Smartphone podem variar dependendo do sistema operacional. A posição dos Aplicativos podem ser diferentes dependendo da plataforma ou versão do software.
Configurações de Rede
1 Pressione no controle remoto para acessar o menu. Aponte para o ícone ( ) [Todas as Configurações] e selecione-o pressionando o botão Scroll (OK) no controle remoto.
()
Todas as Configurações
4 Se a conexão for conectada corretamente, a informação “[Conectado à internet]” é exibida.
Imagem CONEXÃO
Som Canais Conexão Geral Segurança Acessibilidade
Nome da TV
Conexão com fio (Ethernet) Não conectado
Conexão da rede Wi-Fi Conectado à Internet Conector de Dispositivos TV Mobile
ativada Configurações do Screen Share Configurações do dispositivo HDMI
2 Selecione [Conexão] [Conexão com fio (Ethernet)] ou [Conexão da rede Wi-Fi].
Imagem CONEXÃO
Som Nome da TV
Canais Conexão Geral Segurança Acessibilidade
Conexão com fio (Ethernet) Não conectado
Conexão da rede Wi-Fi Não conectado
Conector de Dispositivos
TV Mobile ativada
Configurações do Screen Share
Configurações do dispositivo HDMI
3 O dispositivo tenta conectar automaticamente a uma rede disponível (rede com fio primeiramente). Ao selecionar [Conexão da rede Wi-Fi], uma lista de conexões de rede será exibida. Selecione a rede que será utilizada.
Imagem CONEXÃO DA REDE WI-FI Conexão / Som
Canais
Conexão
Geral Segurança Acessibilidade
Adicionar uma rede sem fio oculta Conectar através de WPS PBC Conectar através de WPS PIN Configurações avançadas de Wi-Fi
Para roteadores sem fio, o símbolo indica a necessidade de acesso com senha.
Verifique o status da conexão acessando a opção [Configurações avançadas de Wi-Fi].
Imagem CONEXÃO DA REDE WI-FI Conexão / Som
Canais
Conexão
Geral Segurança Acessibilidade
Adicionar uma rede sem fio oculta Conectar através de WPS PBC Conectar através de WPS PIN Configurações avançadas de Wi-Fi
www.lg.com
Resolvendo problemas de Rede
1 Pressione no controle remoto para acessar o menu. Aponte para o ícone ( ) [Todas as Configurações] e selecione-o pressionando o botão Scroll (OK) no controle remoto.
Verifique o Roteador ou o seu Provedor de Internet
()
Todas as Configurações
2 Selecione [Conexão] [Conexão com fio (Ethernet) ou Conexão da rede Wi-Fi] [Configurações avançadas de Wi-Fi].
Imagem CONEXÃO
Som Nome da TV
Canais
Conexão com fio (Ethernet) Não conectado
Conexão
Conexão da rede Wi-Fi Não conectado
Geral
Conector de Dispositivos
TV Mobile ativada
Segurança Configurações do Screen Share
Configurações do dispositivo HDMI Acessibilidade
Imagem CONEXÃO DA REDE WI-FI Conexão / Som
Canais
Conexão
Geral Segurança Acessibilidade
Adicionar uma rede sem fio oculta Conectar através de WPS PBC Conectar através de WPS PIN Configurações avançadas de Wi-Fi
Verifique abaixo as instruções relacionadas com o status da conexão.
Verifique a TV ou o Roteador
Quando X for exibido próximo da TV:
1 Verifique o status da conexão na TV e Roteador. 2 Desligue e ligue a TV e o
Roteador. 3 Se estiver usando endereço IP estático, será ne-
cessário inseri-lo nas configurações avançadas. 4 Contate o Provedor de
Internet ou o fabricante
do Roteador.
Quando X for exibido próximo do Gateway: 1 Desconecte o cabo de força do
Roteador por 5
segundos e conecte-o novamente. 2 Reinicialize o Roteador. 3 Contate o
Provedor de Internet ou o fabricante
do Roteador.
Quando X for exibido próximo do DNS: 1Desconecte o cabo de força do Roteador
por 5
segundos e conecte-o novamente. 2 Reinicialize o Roteador. 3 Verifique se o
endereço MAC da TV/Roteador
está registrado com seu Provedor de Internet. Este endereço é exibido no lado
direito da janela de status quando for efetuado o registro junto ao Provedor
de Internet. 4 Verifique o site do fabricante do Roteador para confirmar se o
mesmo tem a última versão de firmware instalado.
Conexão SmartShare com o Smartphone
1 Verifique se a rede Wi-Fi está ativada no smartphone. Para uso do
SmartShare, use a mesma rede para conexão.
2 Instale/execute o aplicativo para compartilhar conteúdo (nos telefones LG
busque o LG TV Plus). 3 Ative no smartphone o compartilhamento de conteúdo com
outros dispositivos. 4 Selecione o tipo de conteúdo (filmes, fotos ou
músicas). 5 Selecione o conteúdo desejado para reproduzi-lo na TV. 6 Inicie a
reprodução do conteúdo na TV.
Atualizando o Software da TV
- A inicilização da TV pode demorar alguns minutos caso seja a primeira vez que ela é ligada após sua compra.
1 [Configurações] ( )[Todas as Configurações] [Geral] [Sobre esta TV] [VERIFICAR POR ATUALIZAÇÕES] 2 Após verificar a versão de software da TV, atualize-a. Se desejar, ative a opção “[Permitir Atualizações Automáticas]”, para atualizar a TV automaticamente.
GERAL Imagem
Som Idioma
Canais
Local Hora e Data
Conexão Temporizadores
Serviço IA Geral Gerenciamento de Conta
Modo Eco Segurança
Sobre esta TV
Configurações adicionais Acessibilidade
Imagem Som Canais
SOBRE ESTA TV
Geral /
Versão do software Permitir Atualizações Automáticas
Conexão
VERIFICAR POR ATUALIZAÇÕES
Informações da TV Geral
Notificações Segurança Guia do usuário
Ajuda rápida Acessibilidade
Entre em contato com nosso SAC caso tenha outras dúvidas.
References
- LG Electronics & Home Appliances | Shop Now | LG USA
- Manual-Hub.com - Free PDF manuals!
- LG Electronics & Home Appliances | Shop Now | LG USA
- Manual-Hub.com – Free PDF manuals!