Liko SABRINA 200 Sit To Stand Lift User Guide
- June 16, 2024
- Liko
Table of Contents
Liko SABRINA 200 Sit To Stand Lift
Product Information
Specifications
- Model: Sabina 200
- Language: English
- Manufacturer: Liko
- Manufacturer Website: www.liko.com
- Product Code: 7EN155502-03
Product Usage Instructions
Hand Control
The hand control allows you to perform various functions:
- Up: Press this button to raise the lift.
- Down: Press this button to lower the lift.
- Widening the base: Use the appropriate button to widen the base of the lift for increased stability.
- Narrowing the base: Use the appropriate button to narrow the base of the lift for maneuverability in tight spaces.
- Indicating low battery capacity: The hand control will display a low battery indicator when the battery needs to be recharged.
Lower-leg Support
The lower-leg support is an adjustable feature of the Sabina 200 that provides additional comfort and stability for the patient during transfers. Refer to the lift’s instruction guide for detailed instructions on adjusting the lower- leg support.
FAQ
- Q: Where can I find quick reference guides for other Liko lifts and slings?
- A: Quick reference guides for Liko’s lifts and slings can be downloaded from the manufacturer’s website at www.liko.com.
- Q: Is this quick reference guide a substitute for the lift’s instruction guide?
- A: No, this quick reference guide is not a replacement for the lift’s instruction guide. For detailed instructions and safety information, please refer to the lift’s instruction guide which can also be downloaded from www.liko.com.
OVERVIEW
Safety Instructions
- Read the instruction guides for the lift and lifting accessories before use.
- Plan the lifting operation carefully.
- Check to ensure that the sling’s strap loops are correctly fastened to the sling bar hooks when the sling strap is extended, but before the patient is lifted from the underlying surface.
Maximum load: 160 kg (350 lbs)
- To retain max. load it is essential to use accessories rated for the same max. load or greater.
IMPORTANT!
This quick reference guide does not replace the lift’s instruction guide,
which can be downloaded at www.liko.com.
Hand Control
- Up
- Down
- Widening the base
- Narrowing the base
- Indicating low battery capacity
Emergency Stop
Electrical Emergency Lowering
Locking the Wheels
Adjustments
Patient´s height
Lower-leg support
Safety Latches
Charging the Batteries
- Charge the lift regularly after use.
- The lift does not function during charging.
- The emergency stop should not be pressed during charging.
Ergonomics
- Never lift manually – let the lift do the lifting.
- Take it easy. Work calmly and methodically.
- Don’t strain your back! Work in a walking stance with your back straight.
- Use the bed’s raising and lowering functions.
- Reduce the lever effect. Work close to the patient and the lift.
Cleaning
- When necessary, clean the lift with a moist cloth, using common surface cleaners or disinfectants.
Simple Troubleshooting
Check to ensure that:
- the emergency stop is not pressed in, see (2)
- the battery is charged
- the hand control is properly connected.
Other Quick Reference Guides
- Quick reference guides for Liko’s lifts and slings are available for downloading at www.liko.com.
Manufacturer
- Liko AB
- SE-975 92 Luleå
- Sweden
- info@liko.se.
- www.liko.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>