DRAGON TOUCH Classic 10 Digital Photo Frame User Manual

DRAGON TOUCH Classic 10 Digital Photo Frame

Product Information

Specifications:

• Model: Classic 10 Digital Photo Frame V4.0
• Screen Size: 10.1 inches
• Screen Type: IPS Touch Screen
• Features: Speakers, Wall Mount Hole, Power Button, Stand Port, Stand, Memory Card Slot, 3.5mm Headphone Jack, USB-A Port, Mini USB Port, DC Power Port

Product Usage Instructions

Getting Started:

1. Install the stand:
   • Insert the bracket into the bracket hole on the back of the frame.
   • You can place the frame either in landscape or portrait (we recommend you place it in landscape during the first setup).
   • You can also mount the frame on the wall with the Wall Mount Hole on the back.
2. Power on:
   • Connect the Power Cable to your frame.
   • Plug the Power Adapter into the wall socket.
   • The frame will enter the system in seconds.

Uploading Photos and Videos to the Frame:

Upload Photos and Videos Via VPHOTO App:

1. Download the Vphoto App:
   • Please download and install the Vphoto app on your mobile device by searching Vphoto in the App Store or Google Play Or scanning the QR code below.
2. Create an Account:
   • Open the Vphoto app.
   • Set your user name and your profile photo.
3. Pair Your Frame with the App:
   • After completing the account setup process, you’ll need to enter the connection code or scan the QR code of your frame.
   • Once you’ve entered the connection code, you will see a pop-up message that says Bind success. This indicates that your account has been successfully linked to your frame and you’re ready to start using it.
   • Note: The Connection code is a 9-digit serial number that is unique to your frame. You can find this code by accessing your frame’s settings page and navigating to My Frame.
   • The Connection code and QR code will refresh every 12 hours.
   • To view the connection code and QR code, you need to connect your frame to Wifi first. If you have not done so, the connection code and QR code will not load out.
4. Upload Photos and Videos:
   • You can write captions for each photo before uploading. To do this, simply tap check the Wifi network.
   • Each video clip is limited to 200MB. Videos can only be uploaded individually.
5. Invite Your Families & Friends to Connect to Your Frame:
   • Your families and friends can share their happy moments with your frame by following the steps below:
   • Download and install the Vphoto app.
   • Open the app, then set the user name and profile photo.
   • Get the connection code from you to connect to your frame. Please make sure your connection code is valid.
   • Start sending the photos and videos to your frame.
   • Here are two ways to share your connection code:
   1. Take a screenshot of the connection code of your frame, then share it with your families or friends.
   2. Open your Vphoto App, and tap the icon in the upper left corner.

Upload Photos and Videos Via Email:

1. Connect Your Email Address to the Frame:
   • When the frame is on the settings screen, tap the + in User Management, then add mailboxes.
   • You or your friends will receive an email to inform your binding request is completed and the way to send photos and videos to the frame.

FAQ:

1. How do I install the stand?
2. Can I mount the frame on the wall?
3. How do I power on the frame?
4. How do I download and install the Vphoto app?
5. How do I create an account on the Vphoto app?
6. How do I pair my frame with the Vphoto app?
7. How do I upload photos and videos via the Vphoto app?
8. What is the maximum size for video clips?
9. How do I invite my family and friends to connect to my frame?
10. How do I upload photos and videos via email?

Welcome to Dragon Touch!
Dragon Touch digital frame is designed to collect & display thousands of your photos privately and safely. It’s easy to get connected with all your loved ones around the world. This manual will provide details you need to set up your frame, and invite families and friends to share photos with your new Dragon Touch frame. Let’s get started!

What’s in the box

Frame Features

1. 10.1″ IPS Touch Screen
2. Speakers
3. Wall Mount Hole
4. Power Button
5. Stand Port
6. Stand
7. Memory Card Slot
8. 3.5mm Headphone Jack
9. USB-A Port
10. Mini USB Port
11. DC Power Port

Getting Started

1. Install the stand
   Insert the bracket into the bracket hole on the back of the frame. You can place the frame either in landscape or portrait (we recommend you place it in landscape during the first setup). You can also mount the frame on the wall with the Wall Mount Hole on the back.

2. Power on
   Connect the Power Cable to your frame and plug the Power Adapter into the wall socket, the frame will enter the system in seconds.

3. Plug in your frame
   Connect the socket to the back of the photo frame, then plug it into a power source. The frame will power on in seconds. You can place the frame in landscape or portrait mode (we recommend placing it in landscape mode during the first setup).

4. Initial Settings
   There are several initial settings including Language, Wifi, Nickname, City, Timezone etc. when you enter the system for the first time.

5. Connect to Wifi
   You can connect to Wifi during the initial settings or under the Wifi setting. Tap the Settings icon to enter the settings page, locate Wifi and tap on it to connect Wifi. Select the Wifi network you would like to connect and enter the password for the connection. If your Wifi network is not on the list, move your frame closer to your router, wait for seconds and check it again.

Note:

1. The photo frame supports 2.4GHz Wifi networks.
2. A private Wifi network is highly recommended.

Uploading Photos and Videos to the Frame

Upload Photos and Videos Via VPHOTO App

Download the Vphoto App
Please download and install the Vphoto app on your mobile device by searching Vphoto in the App Store or Google Play Or scanning the QR code below.

Create an Account
Open the Vphoto app, then set your user name and your profile photo.

Pair Your Frame with the App
After completing the account setup process, you’ll need to enter the connection code or scan the QR code of your frame. Once you’ve entered the connection code, you will see a pop-up message that says “Bind success”. This indicates that your account has been successfully linked to your frame and you’re ready to use it.

Note:

1. The Connection code is a 9-digit serial number that is unique to your frame. You can find this code by accessing your frame’s settings page and navigating to “My Frame”.
2. The Connection code and QR code will refresh every 12 hours.
3. To view the connection code and QR code, you need to connect your frame to Wifi first. If you have not done so, the connection code and QR code will not load out.

Upload Photos and Videos to Your Frame
After pairing the App with your frame, you can start adding photos and videos to your frame anywhere and anytime in the following two ways:

1. Upload photos or videos from your phone’s album.
   First, select the photos or videos from your phone’s album you would like to upload. Second, tap “Next” to choose the frame you would like to send them to. Last, tap the arrow icon in the upper right corner to send photos. Your photos or videos are successfully uploaded to your frame. Warm tip:

2. You can write captions for each photo before uploading. To do this, simply tap on the photo to add descriptions.

3. You can’t modify the title after uploading the photo to the frame.

4. Upload new photos or videos.
   First, tap the camera icon to take new photos or videos. Second, choose the frame you would like to send them to. Third, tap the arrow icon in the upper right corner to confirm. The photo frame will receive the photos or videos in seconds, you can check them on the frame’s photo or video library.

Note:

1. If the frame didn’t receive the photos or videos, please reboot the product or check the Wifi network.
2. Each video clip is limited to 200MB.
3. Videos can only be uploaded individually.

Invite Your Families & Friends to Connect to Your Frame
Your families and friends can share their happy moments with your frame by following the steps below:

1. Download and install the Vphoto app.
2. Open the app, then set the user name and profile photo.
3. Get the connection code from you to connect to your frame. Please make sure your connection code is valid.
4. Start sending the photos and videos to your frame.

Here are two ways to share your connection code:

1. Take a screenshot of the connection code of your frame, then share it with your families or friends.
2. Open your Vphoto App, and tap the icon in the upper left corner.
3. Select “Connected Frame” from the menu.
4. Choose the frame you want your friend to connect to, then tap the Share icon.
5. You will receive a picture of the QR code and Connection code.
6. Send it to your families or friends.

Note:

1. The Connection code is a 9-digit serial number that is unique to your frame. You can find this code by accessing your frame’s settings page and navigating to “My Frame”.
2. The Connection code and QR code will refresh every 12 hours.
3. To view the connection code and QR code, you need to connect your frame to Wifi first. If you have not done so, the connection code and QR code will not load out.

Upload Photos and Videos Via Email
You and your friends can also send photos and videos to the frame via Email.

Connect Your Email Address to the Frame
When the frame is on the settings screen, tap the “+” in “User Management”, then add mailboxes. You or your friends will receive an email to inform your binding request is completed and the way to send photos and videos to the frame.

Upload Photos and Videos to Your Frame

• After adding your email address to the frame, you can email photos and videos to the mailbox of the frame.
• Your photos and videos will be received in minutes. You can check them on the frame’s photo or video library. Each video clip is limited to 200MB.

Upload Photos and Videos Via USB Drive/SD Card
The frame can also support adding photos and videos via some external drives, such as USB drives and SD cards.

1. Insert a USB drive or an SD card into the frame, and wait for seconds, the frame will notify you when successfully connected.
2. Enter the Photo or Video library, and tap USB or SD Card, you will see all the photos or videos stored in the USB drive or the SD card.
3. Tap the More icon in the upper right corner, and select the photos or videos you would like to copy to the internal memory of the frame.
4. Tap the Copy icon on the top then choose OK to import the photos or videos.
5. Your photos or videos will be reserved in Internal Storage in seconds. You can check them on the frame’s photo or video library.

Note:

1. Max supports a 32GB SD Card.
2. Please remove all your external devices when you reset the photo frame.
3. If you have too many files stored in the card, it will take more time to read.
4. Not all models support external drives. Please prevail in kind.
5. USB drive or SD Card supports the FAT32 format only.

Upload Music Via USB Drive / SD Card
The frame can also support uploading music via external drives, such as USB and SD cards.

1. Insert a USB drive or an SD card into the frame, and wait for seconds, the frame will notify you when successfully connected.
2. Enter the Music, and tap USB or SD card, you will see all the music stored in the USB drive or the SD card.
3. Tap the More icon in the upper right corner, and select the music you would like to copy to the internal memory of the frame.
4. Tap the Copy icon on the top then choose OK to import the music.
5. Your music will be reserved in Internal Storage in seconds. You can check them on the frame’s music library.

Key Features

Picture Slideshow

Tap any photos in the upper left corner of the Homepage to enter the photo library. You will find options including All, Internal Storage, TF Card, USB, Folder, Favorites and user list. You can check all photos of each playlist and operate in batches.

• “All” includes photos in the internal storage and external devices. The default playlist is “All”. You also can choose photos in the Internal Storage to start the slideshow.
• “Internal Storage” includes photos sent from the app, email, or copied from external devices.
• “TF Card”/”USB” shows photos on external drives like USB drives or TF cards. To add pictures to “Internal Storage” from “TF Card”/“USB”, you can tap “┇” at the upper right corner, choose the photos you want to add to “Internal Storage”, then tap “ ” and “OK” to confirm the process.
• “Folder” allows you to create folders and name them. Only pictures in “Internal Storage” can be added.

Note:

1. Only pictures in “Internal Storage” can be added to folders and Favorites.
2. To delete some pictures, we highly recommend operating in “Internal Storage” instead of “ALL”; please remove external devices while deleting to avoid deleting files in “USB” or “TF Card” by mistake.
3. Not all models support external drives. Please prevail in kind.
   • During the slideshow, you will have more tools to customize the slideshow simply by touching the screen. There will be an operation column on the bottom.
   • The contents are as follows: Rotate, Full-screen display, Pause, Delete, Zoom in, Setting, Information, Add to favourites, and Slit screen display.
   • You can tap “♡” to add the picture to your “Favorites” and set multi-display for fun. You can adjust the slideshow transition effect and slideshow interval. You can also pause the slideshow to keep showing the current photo.

Video Slideshow

• Tap “Video” on the Homepage to enter the video library, then select the video you want to play.
• Note: Video Clips shared from the app and email will show in the video library.

Multiple Functions

• Music
  Tap Music on the Homepage to enter the music library, then select the music you want to play.

• Weather Forecast
  Choose “Weather” on the homepage, you can check the weather for three days. Both [℃] and [℉] are available. You can switch to the temperature format you want to use. By tapping “+” in the upper left corner to add several cities, you can know the weather of the city you add.

• Clock

  • Choose “Clock”, you can choose the clock skin you like to present the time.
  • Steps: After entering the clock interface, double-click the screen.

• Alarm
  Choose “Alarm” to set up an alarm clock. Tap “Add” to add a new alarm clock and tap “Edit” to adjust the set time and delete the alarm clock you choose.

General Settings

[My Frame]
shows your frame connection code and user management.

• The Connection code and QR code will refresh every 12 hours. You can also refresh the code manually by tapping .

• To nickname your frame, you can tap the frame name in the upper right corner to edit; it will show on the app after you connect it to the frame.

• To send photos and videos to your frame via email, you can simply tap “＋” at ” User Management” to add the email address. Please refer to “Upload Photos or Videos Via Email” for more details.
  Please refer to “UPLOADING PHOTOS VIA EMAIL” for more details.

• “Users” allows you to manage the connected account of the frame. Tap the account name, you can view photos, remark names, delete users, or delete both users and photos.

[Album Settings]

• Motion Sensor
  The motion sensor will automatically turn off the screen when you’re not in the room to save energy.

• Brightness
  Adjust the brightness of the screen.

• Sound
  Adjust the media volume.

• Touch Sounds
  Choose to turn the sound on or off when touching the screen.

• Assistive Touch
  When Assistive Touch is enabled, the assistive touch will appear on the screen. It is a quick navigation key that helps you easily go to the Homepage and adjust the volume.

• Language
  English, Deutsch, Español, Français, Italiano, русский, 日本語, 简体中文 . Set the system language.

• Slideshow

  • Set Slideshow time to make the frame automatically display photos after a period time of inactivity.
  • For example: when you set it to 5 seconds, the screen will automatically switch to the slideshow if there is no operation within 5 seconds.

• Slideshow Mode
  Choose either Sequential or Random mode to display photos.

• Sort by
  Choose the pictures to be sorted by time or name.

• Caption
  When Caption is enabled, the captions you write will be displayed on the photo.

• Date and Time
  Set the date and time according to your preference. You can select the time zone and use network-provided time.

• Sleep
  Set the Auto-On/Off time to make the display automatically turn on and off at a specific time.

• Auto-rotate Screen
  When the Auto-rotate screen is enabled, you can place the frame in portrait and landscape. The frame will adjust the picture automatically.

• Notification Sounds
  Choose whether you want to be notified about new messages with sounds or not.

[Wifi]
Select the Wifi you want your frame to connect to.

[Factory data reset]

1. Tap Factory data reset to reset your frame.
   Here are two ways to reset:

2. Choose “Delete all users and restore the device to inactive”, device files will be reset and all bound users will be unbound.

3. If you do not choose this option, only device files will be back to default settings and bound users remain.

4. Tap OK to reset your frame.

   • [Help]
     A simple guide for you to share your pictures.

   • [About]
     Tap “About” to check your frame’s version, frame ID, serial number, etc. The frame version is of great help to troubleshooting. When you’re asked to provide the frame version, you may find it here.

Technical Specification

• Adapter: Input 100-240V 50/60HZ
• Picture Format: BMP, JPG, GIF, PNG
• Audio Format: Mp3, WMA, OGG, AAC, APE, FLAC, WAV
• Video Format: MPEG1, MPEG2, MPEG4, Xvid, AVI, M-JPEG, H.264, MOV, VOB, MKV, DIVX4, DIVX5, DIVX33GP
• External support: Max 32GB USB drive/SD Card
• Support 2.4GHz Wifi network

Troubleshooting

1. Does the frame have to be plugged in all the time?
   This frame needs to be plugged into a DC outlet all the time.

2. Why can’t this frame connect to Wifi?
   It supports 2.4GHz Wifi networks, select the Wifi network you would like to connect to and enter the password correctly if required. If your Wifi network is not on the list, restart your frame or move it closer to your router, wait for seconds and check it again.

3. Does this frame need to connect to Wifi to work or just in the setup process?
   This frame needs to connect to a Wifi network for setup, receiving new photos or videos, user requests and software updates. Otherwise, the frame can just play photos or videos without a Wifi connection.

4. Why is there no sound from the frame?
   Please check if the volume is turned down to 0 and if the player is in Mute mode.

5. Can I share photos and videos of the frame?
   Yes, you can share both photos and videos (up to 200MB) to the frame.

6. Can I cycle pictures and videos together?
   You could only play photos or videos separately.

7. Can this frame automatically turn on/off at a specific time?
   You can go to the Sleep setting and set the auto on/off time as you want.

8. Why are there no files after sharing videos or pictures to the cloud server?
   Please check if the upload process is completed.

9. Why can’t this frame play the file?
   Please confirm if the file format is compatible with the frame.

10. Can I change the image transitions and display speed?
    Yes, the speed can be adjusted in the bottom column when the picture is displayed.

Contact Us

• 888-811-1140 (US)
• cs@dragontouch.com.
• www.dragontouch.com.

For any inquiries about Dragon Touch products, please feel free to contact us. We will respond within 24 hours.

References

• Dragon Touch Android Tablet PC, 4k Action Camera & Sports DV Camera at Dragon Touch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>