BLACK+DECKER FP1600B 8-Cup Food Processor Instruction Manual

June 16, 2024
BLACK+DECKER

BLACK+DECKER FP1600B 8-Cup Food Processor

BLACK+DECKER FP1600B 8-Cup Food Processor-product

Customer Care Line:

For online customer service and to register your product, go to www.prodprotect.com/applica

Please Read and Save this Use and Care Book.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  • Read all instructions.
  • To protect against the risk of electrical shock do not immerse cords, plugs, or appliances in water or other liquid.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
  • Avoid contacting moving parts.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. Or, call the appropriate toll-free number on the cover of this manual.
  • The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
  • Do not use outdoors.
  • Do not let the cord hang over the edge of the table or counter.
  • Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running.
  • The blade is sharp. Handle carefully.
  • To reduce the risk of injury, never place the cutting blade or discs on the base without first putting the bowl properly in place.
  • Be certain the cover is securely locked in place before operating the appliance.
  • Never feed food by hand. Always use a food pusher.
  • Do not attempt to defeat the cover interlock mechanism.

SAVE THESE INSTRUCTIONS. This product is for household use only.

Note: The maximum rating is based on the chopping blade. Other attachments may draw significantly less power.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-friendly parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more length is needed, use an extension cord rated no less than 15 amperes. (For 220-volt rated products, use an extension cord rated no less than 6 amperes.) When using an extension cord, do not let it drape over the working area or dangle where someone could accidentally trip over it. Handle the cord carefully for a longer life; avoid jerking or straining it at outlet and appliance connections.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel; in Latin America, by an authorized service center.

PRODUCT PARTS

product may vary slightly from what is illustrated.

BLACK+DECKER FP1600B 8-Cup Food Processor-fig- \(1\)

  1. Food pusher (Part # 07255EZ B)
  2. 8-cup processing workbowl cover (Part # 77916) 8 cup
  3. Stainless steel slicing and shredding disk (Part #77919)
  4. Disk stem (Part # 77917)
  5. Stainless steel chopping blade (Part # 77920)
  6. 8-cup processing workbowl (Part # 77915)
  7. Base
  8. Cord wrap (under base)
  9. Non-skid suction feet (Part # 09183-1)
  10. Control panel
  11. Center post
  12. Feed chute
  13. Workbowl coupling (Part # 77918 )

Note: † indicates consumer replaceable/removable parts

CONTROL PANEL

The controls are located on the front of the base (B). Press O FF/PULSE or O N to select a function (see directions below).

OFF/PULSE CONTROL

  • Processor should be stored in O FF position and unplugged when not in use.
  • Use PULSE for short processing tasks. This lets you control the size and uniformity of foods being chopped.
  • The O FF/PULSE button must be pressed and held for the appliance to operate in PULSE mode. When released, the appliance will stop.
  • The motor of the processor will run as long as the O FF/PULSE button is held down. Press the button and then release to allow the blade to stop running and the food to fall to the bottom of the workbowl.
  • Pulsing gives better control when chopping, mincing, mixing and blending foods. You can control the size of the foods, from coarse to fine.

ON CONTROL

When the O N control is selected, the processor will run continuously until the OFF/PULSE button is pressed.

How to Use

This product is for household use only.

  • Remove all packing material and any stickers from the product.

  • Please go to www.prodprotect.com/applica to register your warranty.
    Important: Handle chopping blade and slicing and shredding disk carefully. They are very sharp.

  • Wash all removable parts as instructed in CARE AND CLE ANING section of this manual.

  • Select a level, dry countertop where the appliance is to be used, allowing air space on all sides to provide proper ventilation for the motor.

ASSEMBLING THE PROCESSOR

How to Insert and Remove the Center Post:

The center post is removable:

  1. Turn the bowl upside down.
  2. Grasp the clear outer tabs and turn the center post clockwise until the lower tabs are free. L ift the post out (C).
  3. To return to its original position, place center post into smaller opening in bottom of workbowl and turn counterclockwise until tabs snap into place.

How to Lock the PROCESSING WORKBOWL in Position

  1. Attach center post to workbowl. Place the workbowl on the base with handle turned to the right of the locking mechanism (D) over the unlock symbol .
  2. Hold handle and rotate workbowl clockwise toward the lock symbol until it clicks firmly into place (E).

Note: Be sure to lock the workbowl in place before attaching the chopping blade or the slicing and shredding disk and the cover.

HOW TO CHOP IN THE PROCESSING WORKBOWL

The chopping blade is used to coarsely or finely chop, mince, mix, and puree foods to a smooth consistency.

  1. Lock workbowl into position (see Illustrations D and E).

  2. Hold chopping blade by center shaft and insert onto center post (F).
    Caution: The chopping blade is very sharp. Use caution when handling and storing.

  3. Place food in workbowl.

  4. Place cover on workbowl and lock into place by rotating clockwise (see Illustration J).

  5. Place the food pusher in place.
    Important: Never use your fingers to direct food through the feed chute.

  6. Select your desired speed (PULSE or ON).
    Note: Process foods for no more than a few seconds at a time. Pulsing produces excellent results and offers greater control.
    Important: Make sure the chopping blade has completely stopped spinning before removing cover from processing bowl.

  7. Press the OFF/PULSE button and allow the chopping blade to stop revolving before removing cover. Twist cover toward (counterclockwise) to remove.
    Important: Unlock lid first before removing workbowl.

  8. Unlock workbowl by turning it counterclockwise and lift off base.
    Note: Remove workbowl from appliance before removing the chopping blade to prevent food from leaking through the center opening of the workbowl.

  9. Carefully remove the chopping blade.

  10. Unplug appliance when not in use.

Helpful Tips for Chopping:

  • Watch carefully to avoid over-processing foods.
  • The PULSE button offers the best control.
  • For best results, process foods that are about the same size.
  • Do not overload the workbowl.
  • Never walk away from the processor while it is on.
  • You may use hot but not boiling liquids.
  • Do not process more 3 cups of liquid in the workbowl at any given time.
  • To process meat, use no more than 2 cups of ¾-inch cubes. Process using PULSE in 5 second intervals.
  • Insert a funnel into the feed chute when adding ingredients such as, oil, flour and sugar.

HOW TO SLICE OR SHRED IN THE WORKBOWL

  1. Lock workbowl into position (see Illustrations D and E).

  2. Place disk stem onto center post in workbowl.

  3. Carefully place slicing and shredding disk on top of disk stem with appropriate side up (depending on work to be done) (G).
    Caution: The slicing and shredding disk is very sharp. Use caution when handling and storing.

  4. Place cover on workbowl and lock into place by rotating cover clockwise (see Illustration J).

  5. Fill feed chute with food. Position food pusher over food (H).

  6. Select the PULSE or ON control; press firmly on food pusher to guide food through feed chute, but do not force it
    Note: Heavy pressure on the pusher does not speed the work; use the pusher only as a guide. Let the processor do the work.

  7. When finished, press OFF/PULSE and wait for disk to stop rotating before removing cover. Twist cover toward counterclockwise to remove.
    Important: Unlock lid first before removing workbowl.

  8. Carefully remove the slicing and shredding disk. Unlock workbowl by turning it counterclockwise and lifting it off the base.

  9. Unplug appliance when not in use.

Helpful Tips When Slicing and Shredding

  • Before slicing fruits and vegetables in the processor, cut a thin slice from the bottom of the food to make it flat.
  • Place the food cut side down in feed chute.
  • Remove seeds and pits before processing.
  • Select foods that are firm and not overripe.
  • Remove the core from hard vegetable such as cabbage.
  • When slicing thinner vegetables, cut them just short of the length of the feed chute and stand them vertically in feed chute so they are solidly packed and cannot turn or tilt.
  • Shred hard cheeses at room temperature.
  • Chill soft and semi-hard cheeses before shredding.
  • After food has been processed, remove the cover and invert on countertop. Remove the slicing and shredding disc before removing the workbowl from the processor. Place the disk on top of the inverted workbowl cover.

How to Lock the Cover

  1. Place cover over the workbowl with the small latch to the right of the workbowl’s handle (J).

  2. Hold feed chute of the workbowl cover and rotate cover clockwise until cover locks into place.
    Important: For your protection this appliance has an interlock system. The processor will not operate unless the processing workbowl and cover are properly locked in place.

  3. Insert the food pusher into the feed chute.

Note: The food pusher is used to guide foods through the feed chute and can be removed when adding liquid or additional foods while the processor is running.

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

Note: Do not attempt to sharpen the cutting edges of the chopping blade or slicing and shredding disk. They are permanently sharpened at the factory and will be ruined if sharpened.

CLEANING

Note: Before cleaning, be sure the unit is turned off and cord is unplugged.

  • Completely disassemble processor parts before washing.
  • Rinse parts immediately after processing for easy cleanup.
  • Wipe base and feet with a damp cloth and dry thoroughly. Stubborn spots can be removed by rubbing with a damp cloth and a mild, nonabrasive cleaner. Do not immerse base in liquid.
  • All removable parts can be washed by hand or in a dishwasher. Hand washing of plastic parts will help to maintain the food processor’s appearance.
  • If washing by hand, fill the workbowl with hot soapy water and rapidly raise and lower the chopping blade or slice and shred disk up and down on the center shaft.
  • If washing in a dishwasher, place removable parts on top rack only – not in or near utensil basket.
  • Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda and 1 tablespoon of water. Apply to stains and let standovernight. Rinse and dry.
  • Do not use rough scouring pads or cleansers on any plastic or metal parts to clean.
  • Do not allow chopping blade or slicing and shredding disk to soak in water for long periods.
  • Remember to clean the internal shaft of the chopping blade; use a baby bottle brush to remove any clogged food particles.
  • If you are having trouble closing the cover over the workbowl, apply a small amount of vegetable oil to the rim of the cover and workbowl. This shouldmake the pieces work smoother when attaching the cover to the workbowl.

TROUBLESHOOTING

pROBLeM

|

pOssIBLe Cause

|

sOLutION

---|---|---
Food is unevenly| Workbowl is overfilled.| Smaller amounts will
chopped.| You may be running the| process more evenly.
| bowl continuously| Use the PUlSe button
| instead of on PUlSe.| in 5-second or less
| Food may be cut in ran-| increments. Allow the
| dom sizes.| blade to stop completely
| | before pressing the
| | PUlSe button again.
| | Cut food in same size
| | pieces before placing in
| | processor.
liquid leaks from| Too much liquid in the| Process smaller
the bottom of the workbowl.| workbowl.| amounts. When processing liquids, do
| | not add more than 3
| | cups to workbowl. do not
| | remove the blade before
| | removing workbowl from
| | processor when
| | processing liquids.
Sliced foods are| The feed chute has not| Cut pieces in even
uneven and slanted.| been well packed or| lengths, just a little
| uneven pressure has| shorter than the length of
| been applied to the| the feed chute. Pack the
| food pusher during| chute carefully and main-
| processing.| tain even pressure on the
| | food pusher as the food is
| | being processed.
Foods being sliced or| This is normal.| Stop processing
shredded fill up on| | occasionally and either
one side of the bowl.| | even out the food in the
| | workbowl or move it to
| | another bowl. When food
| | accumulates close to the
| | disk, empty the workbowl
| | before continuing.
pROBLeM| Possible Cause| sOLutION
---|---|---
Some pieces of food| This is normal.| Slice or shred those
remain on top of the| | pieces by hand or save
slicing and shredding| | for another use, like
disk.| | soups that will be pureed.
Soft cheese collects| The cheese was not cold| Be sure soft cheeses
on top of the slicing| enough. The pressure| is well chilled or placed
and shredding disk.| exerted on the pusher was too great.| in the freezer until knife inserted into cheese
| | penetrates about ½-inch.
| | Remember food pusher
| | is to be used as a guide;
| | never exert hard pressure
| | on the food pusher.

NEED HELP?

For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.

Two-Year Limited Warranty

(Applies only in the United States and Canada)

What does it cover?

  • Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of product.

For how long?

  • Two years after date of purchase.

What will we do to help you?

  • Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

What does your warranty not cover?

  • Damage from commercial use
  • Damage from misuse, abuse or neglect
  • Products that have been modified in any way
  • Products used or serviced outside the country of purchase
  • Glass parts and other accessory items that are packed with the unit
  • Shipping and handling costs associated with the replacement of the unit
  • Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

  • This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

is a trademark of The Black & Decker Corporation, Towson, Maryland, USA

Made in People’s Republic of China

Printed in People’s Republic of China

FREQUENTLY ASKED QUESTIONS

What is the brand of the food processor, and what is the specific model number?

The food processor is from BLACK+DECKER, and the model number is FP1600B.

What are the dimensions of the BLACK+DECKER FP1600B 8-Cup Food Processor?

The food processor has dimensions of 7.8 inches in diameter, 11.26 inches in width, and 15.67 inches in height.

What color is the BLACK+DECKER FP1600B 8-Cup Food Processor?

The food processor comes in black color.

What is the bowl capacity of the BLACK+DECKER FP1600B Food Processor?

The food processor has a bowl capacity of 8 cups.

What are the recommended uses for the BLACK+DECKER FP1600B Food Processor?

The food processor is recommended for shredding, chopping, slicing, mincing, and grating.

Are the removable parts of the BLACK+DECKER FP1600B Food Processor dishwasher safe?

Yes, the removable parts are dishwasher safe according to the product care instructions.

What components are included with the BLACK+DECKER FP1600B Food Processor?

The food processor includes a shredder disk, chopping blade, work bowl, and comes with a 2-Year Limited Warranty.

What is the model name of the BLACK+DECKER food processor, and what does it emphasize about its function?

The model name is Food Processor, emphasizing its functionality in food processing tasks.

Is the BLACK+DECKER FP1600B Food Processor blade made of stainless steel?

Yes, the blade of the food processor is made of stainless steel.

What is the weight of the BLACK+DECKER FP1600B 8-Cup Food Processor?

The food processor weighs 5.35 pounds.

What is the capacity of the work bowl in the BLACK+DECKER FP1600B Food Processor?

The work bowl has an 8-cup capacity, providing ample room for various food processing tasks.

How does the food chute with pusher in the BLACK+DECKER FP1600B assist during operation?

The food chute with pusher helps guide food towards the slicing/shredding disk while the processor is in operation, ensuring consistent results.

Are the removable parts of the BLACK+DECKER FP1600B Food Processor safe for hand washing?

The product care instructions mention hand wash for the removable parts.

What safety feature does the BLACK+DECKER FP1600B Food Processor have regarding blade operation?

The food processor is equipped with a Safety Interlocking System, ensuring that the blades operate only when the lid is securely attached to the bowl.

Does the BLACK+DECKER FP1600B Food Processor come with any warranty, and if so, what is the duration?

Yes, the BLACK+DECKER FP1600B Food Processor comes with a 2-Year Limited Warranty.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: BLACK+DECKER FP1600B 8-Cup Food Processor Instruction Manual

REFERENCES

BLACK+DECKER FP1600B 8-Cup Food Processor Instruction Manual- Device.Report

BLACK+DECKER FP1600B 8-Cup Food Processor Instruction Manual- wiki

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

BLACK+DECKER User Manuals

Related Manuals