BINBOK SW52-1 GEMINI Feature Pro Controller User Guide
- June 16, 2024
- BINBOK
Table of Contents
BINBOK SW52-1 GEMINI Feature Pro Controller User Guide
DIMENSION INSTRUCTION
Layout
Specifications
Working voltage: DC3.7-4.2V
Input voltage/current: DC5V/1A
Charging time: about 3 hours
Continuous running time: >10 hours 5.
Battery capacity: 1000mAh
Wired Pairing
-
Please make sure that the Switch has turned on the wired
connection mode. (Setting – Controllers and Sensors – Pro Controller Wired Communication) -
Connect the controller to the dock of switch with a USB cable.
-
After the wired connection is successful, unplug the USB cable, and the controller will automatically connect wirelessly
wireless Pairing
- Press the power button of Switch to start the host and enter the “Controller Settings – Change Grip / Order” page.
- While the controller is in the powered-off state, press and hold the Pairing button for 1.5s or hold the Home button for 5s til the LED1-4 Light flash quickly.
- After successfully connected, the LED1-4 Light indicate the corresponding game player. (Controller will vibrate
Reconnection
- Short press the Home button, the controller will turn on and automatically reconnect to the Switch.
- After successfully connected, the LED1-4 Light indicate the corresponding game player. (Controller will vibrate
Status
Wake Up
After the first successful connection, press the Home button to wake up the
switch and reconnect (other buttons can not wake up).
Power Off
To power off the controller, press and hold the Pairing button for 0.5s or
hold the Home button for 5 seconds.
Low Battery
When the battery power is low, the LED1-4 Light lights flash quickly at the
same time.
Charge
Disconnected State：
The LED1-4 Light will display the charging progress and flash slowly. When the
battery is fully charged, the The LED1-4 Light will turn off.
Connected State:
The corresponding LED Light will flash slowly. When the battery is fully
charged, The LED Light light will stay solid.
Light
Change Colors
Press the Light button once to change the color successively in: Single Color
Breathing Mode ＆ Single Color Breathing Mode
Colors: symmetric rainbow – rainbow – pink – red – orange – yellow – green – blue – cyan – purple
Vibrating Lights
The lights will quickly transition from the current brightness to the
brightest level when the vibration occurs in: Single Color Breathing Mode ＆
Automatic Single Color Breathing Mode
Change Modes
Double press the light button to switch light modes. (Controller will vibrate)
Mode 1 : Single Color Breathing
Mode 2: Automatic Single Color Breathing
Mode 3: Single Color Solid
Mode 4: Lights Off
Brightness Adjustment
Press and hold the light button for 1s to start adjusting the brightness:
40%-70%-100% (Controller will vibrate)
Mapping
Seting
- Hold the M button and press any of M1/M2 button to enter the programming mode.
- Then input the button or button combination you want to set.
- Each programmed button(M1/M2) can record up to 21 inputs(Each press of function buttons is regarded as an input)，When the input exceeds 21 times，the programming will automatically end.
- When youʼre done , press the M1/M2 button that was pressed earlier to end the programming.
Note: The controller will vibrate when you start or end the programming.
Cancel
Method a: After entering the programming mode, directly press the M1/M2
button that was pressed earlier to exit without setting any buttons. (at this
time，M1/M2 button is empty and there is no function)
Method b: Press the M button for 5s to reset the assaign function.
Note: The controller will vibrate when you cancel the programming
Turbo
Buttons can be set
A / B / X / Y /R / ZR / L / ZL / M1/ M2 / D-Pad.
Seting
A: Hold the Turbo button and press the button that you want to set to
turn on the turbo function. (Controller will vibrate)
Cancel
A: Hold the Turbo button and press the button that you have set to turn
off its turbo function. (Controller will vibrate)
B: Hold the Turbo button for 4s to cancel the Turbo function of all
buttons.(Controller will vibrate)
Vibration Adjustment
- The controller is set to linear motor mode by default (motor switch on the left).
- Move the Motor Switch to the left for linear motor mode, move it to the right for rotor motor mode, or keep it in the middle to turn off all motors.
- The controller will vibrate for 0.5s when you successful switch on vibration .
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Binbok Marketing
Official Homepage : binbok.com
（Register on this web to activate aftersales）
@BINBOKOffcial
Official Homepage : binbok.com （Register on this web to activate aftersales）
support@binbok.com
Business Contact: contact@binbok.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>