mbeat MB-USBTR118 Retro Briefcase Styled Turntable Instruction Manual

: June 16, 2024
: mbeat

Table of Contents

mbeat MB-USBTR118 Retro Briefcase Styled Turntable
Product Information
Product Usage Instructions
Product Care
Product Support
Location of Controls
Control Buttons
Input and Output
Unpacking
Turntable Mode
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

mbeat MB-USBTR118 Retro Briefcase Styled Turntable

Product Information

Specifications

Model: MB-USBTR118
Product Type: Retro Briefcase Styled Turntable
Supported Modes: Full Track or Split Track
Supported Formats: Vinyl Record, MP3
Input: AUX-IN, USB Disk Slot
Output: Built-in Speakers, RCA Audio Out
Control Buttons: Turntable, USB, AUX-IN, Record

Product Usage Instructions

Unpacking
When you receive the product, carefully unpack it and ensure that all the components are present.

Product Care

After use, remove the vinyl record from the turntable and return it to its original package for storage.
Retain the toner arm to its original place after use.
Replace the protective cap of the stylus cartridge after use.
Close the turntable cover to avoid dust and lock it properly.
Unplug the power cable and other cables after use.

Turntable Mode
In Turntable mode, you can play vinyl records through the built-in speakers.

USB Play Mode
In USB Play mode, you can playback MP3 files stored in a USB disk.

Aux-In Play Mode
In Aux-In Play mode, you can play music from an external device connected through the AUX-IN input.

Vinyl Record Mode
In Vinyl Record mode, you can record vinyl records to a USB disk.

Under full track record mode, the red LED record indicator flashes every second. The vinyl will be recorded in one file.
Under split track record mode, the red LED record indicator flashes quickly every half second. The vinyl will be recorded in each individual track.

RCA Audio Out
The product has an RCA Audio Out port for connecting to external audio devices.

Replace Stylus
If the stylus cartridge needs replacement, follow the instructions in the product manual for proper replacement.

Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting section in the product manual or contact mbeat support for assistance.

FAQ

Q: Where can I find more support for this product?
A: You can visit www.mbeat.com.au and use their online support ticket system to inquire about the product.

Q: Can I open the device for repairs?
A: No, for your personal safety and to avoid voiding the warranty, do not attempt to open the device. There are no user serviceable parts inside.

Q: How can I register my product for warranty?
A: You can register your product for future warranty reference by visiting http://www.mbeat.com.au/support/product-registration/.

Introduction
Thanks for purchasing this product from mbeat. Please read instructions carefully before use and store in a safe place for future reference.

Product Care

Do NOT leave vinyl record on the turntable after use. Return the vinyl record to its original package & store. Retain the toner arm to its original place after use. Replace the protective cap of the stylus cartridge after use. Close the turntable cover to avoid dust and lock it properly. Unplug the power cable and other cables after use.

Product Support

Looking for more help? Visit www.mbeat.com.au
Using our online support ticket system to inquiry about product. For your personal safety, do not attempt to open the device.
No user serviceable parts inside and warranty void if device opened.

Product Registration

Go to http://www.mbeat.com.au/support/product-registration/ to register your product for future warranty reference.

Location of Controls

A Built-in Speakers
B Mode LED Display
C USB Disk Slot
D Power/Volume
E Control Panel
F RPM Switch,Auto-Stop Switch
G Turntable Stylus

Control Buttons

Under full track record mode, the red LED record indicator flashing every second. The vinyl will be recorded in one file.
Under split track record mode,the red LED record indicator flashing quickly every half second. The vinyl will be recorded in each individual tracks.

Input and Output

A Aux-IN
B Aux-OUT
C DC-IN

Unpacking

Remove packing material and set the unit on its end.
Open the lid of the unit.
Remove the black tie-wrap from the tone arm.
Remove the white stylus protective cap.
Release the tone arm’s hold down clip. Unlock the tone arm.

Turntable Mode

Plug the power adaptor DC jack to your turntable.
Connect the big end of the power plug to the wall outlet.
Place the vinyl record on your turntable.
Set the correct speed (rpm) of your vinyl record (33/45/78rpm).
For 45rpm vinyl record, using the 45rpm adaptor.
Turn on the power of the turntable, you can see the red indicator of turntable mode is on.
Move the tone arm to the desired starting point on the record. The turntable starts to play.
Adjust speaker volume to the preferred level.
Slide the Auto Stop Control switch to choose the auto stop.
At the end of the record, the tone arm will stop automatically.
You must return the tone arm to the tone arm rest manually.

USB Play Mode

Switch the mode button to USB play mode, the red LED indicator is ON.
Plug the USB disk to the USB slot.
Press play button to start playing USB disk’s music.
You can play own mp3 music or recorded vinyl music.

AUX-IN Play Mode

Switch the mode button to AUX-IN mode, the red LED indicator is ON.
Connect any external audio source (phone, iPad, MP3 player) to AUX-IN socket at back of the turntable.
To connect the device to the turntable, you need 3.5mm jack audio cable.

Vinyl Record Mode

Press record button ONCE to turn on full track record mode, the red LED indicator is ON and flashing every second.
Under above mode, the vinyl is recorded in one mp3 file.
Press record button TWICE to turn on split track record mode, the red LED indicator is ON and flashing every half second.
Under above mode, the vinyl is recorded in each individual file.

RCA Audio Out
Enable you to play turntable music through the external speakers. To make this type of connection, you need RCA cable.

Replace Stylus
The turntable’s stylus needs to be replaced every 3-4 months after continue playing.
To buy replacement stylus, go to www.mbeat.com.au to order.

Troubleshooting

Device is not power on?

Make sure that the turntable is connected to the power.Make sure that you turn on the PWR/VOL. button.

Noise from the speakers?

Check your vinyl track is not damaged and your vinyl is not deformed. Check if your stylus needle needs to be replaced in every 3-4 months. Do not try to turn the recorder’s speaker volume to the max. level to avoid sound distortions.

How can I play back recorded files?

You can switch to USB mode to play back recorded files through built-in speakers.

Need more help?

Visit our website for further support, such as register your product and submit support questions.

www.mbeat.com.au
support@mbeat.com.au

mbeat.com.au
mbeataustralia