OCTANE SEATING XL900 Blaze Stadium Chairs User Guide

: June 16, 2024
: OCTANE SEATING

Table of Contents

OCTANE SEATING XL900 Blaze Stadium Chairs
Product Information
Product Usage Instructions
FAQ
Unpack the box
HOW TO RECLINE
ACCESSORY DOCK
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OCTANE SEATING XL900 Blaze Stadium Chairs

Product Information

Specifications

Models: XL450, XL500, XL550, XL600, XL650, XL700, XL750, XL800, XL850, XL900 XS300, XS400, XS700, XS850, XS900, XS950
Weight: Each seat weighs over 100 pounds
Power Requirement: 2.8 amps of electricity per seat
Accessories: LED cup holders and base rail (not available on all models), Accessory Dock (compatible with various accessories sold separately)

Product Usage Instructions

Unpacking and Preparing the Furniture

Please read all instructions carefully before starting the assembly. It is recommended to have two adults for the process.

Unpack the box and remove all packaging materials from the seat base and the seat back.

Attaching the Seat Back

Slide the metal female receivers located on both sides of the seat back onto the male steel mechanism posts attached to the seat base.
With both hands, firmly push down on the seat backs to lock them into place.

Applying Rubber Foot Pads

If placing the seats on a hard surface floor, locate the small bag of round rubber foot pads sent with your theatre seats.
Apply the rubber pads to the bottom of all plastic feet. This will prevent the seats from sliding and protect your floor from scratches.
This step is not necessary if the seats are placed on a carpeted floor.

When placing the theatre seats, please note that they do not connect. Each seat weighs over 100 pounds, so when placed in position, they won’t move.

Refer to the diagrams below to visualize how to place the seats based on your desired configuration:

Powering On (Power Recline Models Only)

Underneath each theatre seat, towards the back, locate the electrical cord with a two-prong plug.
Simply plug this into your wall outlet.
If you have purchased multiple theatre seats or rows of seats, it is recommended to use a surge protector and plug all the seats per row into it.
Each cord is approximately 8 feet long.
Only 2.8 amps of electricity are required for each seat.

LED Cup Holders & Baserail

If your model includes LED cup holders and base rail, locate the LED cable.
Remove any ties holding the extra cable to the frame.
Attach the LED cable to the extra connector located on an adjacent seat that contains an arm.
The adjacent seat will then control both the lower LED lights for the two seats.

Accessory Dock

The Accessory Dock is designed to enhance your theatre seating experience. It is constructed of 100% aluminium and situated on each arm in front of the cup holders.
It can fit a host of accessories (all sold separately), including a swivel tray table, wine glass holder, iPad & tablet holder, phone holder, LED flex light, and many other items.
To use an accessory, simply slide it into the Accessory Dock.
Remove the accessory when not in use.
Please note that not all models offer this feature.

FAQ

Can the seats be connected?
No, the seats do not connect. Each seat weighs over 100 pounds, so when placed in position, they won’t move.
What power requirement do the seats have?
Each seat requires only 2.8 amps of electricity.
Are rubber foot pads necessary?
If you are placing the seats on a hard surface floor, it is recommended to apply the round rubber foot pads to prevent sliding and protect the floor from scratches. This step is not necessary if the seats are placed on a carpeted floor.
Can I use a surge protector for multiple seats?
If you have purchased multiple theatre seats or rows of seats, it is recommended to use a surge protector and plug all the seats per row into it.
How do I control the recline function?
The control method depends on the model:
- Models with Power Recline: Use the provided controls.
- Models with an Armless Power Recline Seat: Press the recline button on the adjacent seat with an arm to control both seats.
- Models with Manual Recline: Pull the lever located on the side of the seat upwards while leaning back until it locks into place.
How do I use the LED cup holders and baseball?
If your model includes LED cup holders and a base rail, attach the LED cable to the extra connector located on an adjacent seat that contains an arm. The adjacent seat will then control both seats’ lower LED lights.
What can I use with the Accessory Dock?
The Accessory Dock is compatible with various accessories (all sold separately), including a swivel tray table, wine glass holder, iPad & tablet holder, phone holder, LED flex light, and many other items.

Please note that not all models offer this feature.

GET READY

Unpack the box

Please read all instructions carefully before starting the assembly. It is recommended to use two adults throughout the process.

Prep the Furniture
Remove all packaging materials from the seat base and the seat back.
Attach the Seat Back
Slide the metal female receivers located on both sides of the seat back onto the male steel mechanism posts attached to the seat base. With both hands, firmly push down on the seat backs to lock them into place.
Apply Rubber Foot Pads
Locate the small bag of round rubber foot pads sent with your theatre seats. If placing the seats on a hard surface floor, apply the rubber pads to the bottom of all plastic feet. This will prevent the seats from sliding. Failure to follow this instruction can cause scratches to your floor. This step is not necessary if the seats are placed on a carpeted floor.
Configure Your Layout
When placing the theatre seats, please note that they do not connect. Each seat weighs over 100 pounds so when placed in position they won’t move.
The diagrams below will assist you in visualizing how to place the seats based on your desired configuration. Please note there are several ways each configuration can be put together so yours might vary slightly.
Power On (Power Recline Models Only)
Underneath each theatre seat, towards the back, is an electrical cord with a two-prong plug. Simply plug this into your wall outlet.

If you have purchased multiple theatre seats or rows of seats, we recommend purchasing a surge protector and plugging all the seats per row into it. Please note that each cord is approximately 8 feet long.
Only 2.8 amps of electricity are required for each seat.

HOW TO RECLINE

Models with Power Recline

Plug the theatre seats into a power source, such as a wall outlet or surge protector.
Locate the two buttons to recline the seat up and down. Depending on the model purchased this will be situated on either the rim of the cup holder or on the inside arm.
Press and hold the button to recline the seat until you have reached your desired position, then release.
To bring the chair back up follow the same procedure as above, but with the other button.

Models with an Armless Power Recline Seat

The recline buttons to recline the seat up and down will be located on the side of the frame below the seat cushion.

Models with Manual Recline

Locate the recline lever. Depending on the model purchased this will be situated on either the inside arm as a latch handle or on the inside frame slightly below the seat cushion as a parachute cord.
Using your fingers, release the lever by pulling it out away from the chair. This will release the footrest.
To recline the seat even further, use the weight of your back on the backrest and also place the sole of your foot on the footrest and push outwards until your desired reclined position has been achieved.
To bring the chair back up, use the weight of your legs and back to push the chair upright and close the foot ottoman until it locks into place.

LED CUP HOLDERS & BASERAIL

Plug the theatre seats into a power source, such as a wall outlet or surge protector.
Locate the button to turn the lights on and off. Depending on the model purchased this will be situated on either the rim of the cup holder or on the inside arm.
Press the button once and the lights will come on.
Press the button again to turn them off.
If you have an armless seat in your configuration, you will need to locate the cord to the base rail LED Light Strip and remove any ties holding the extra cable to the frame. You can then attach the LED cable to the extra connector located on an adjacent seat that contains an arm. The adjacent seat will then control both the lower LED lights for the two seats.

ACCESSORY DOCK

The Accessory Dock was designed to enhance your theatre seating experience. It is constructed of 100% aluminium and situated on each arm in front of the cup holders. It fits a host of accessories (all sold separately), including a swivel tray table, wine glass holder, iPad & tablet holder, phone holder, LED flex light, and many other items. You simply slide the accessory into the Accessory Dock and enjoy. Simply remove the accessory when not in use.

Please note that not all models offer this feature.