LIONS ARK DST series PIDZOOM Multi Tool Allen Key with Tripod Screw Drive User Manual
- June 16, 2024
- LIONS ARK
Table of Contents
LIONS ARK DST series PIDZOOM Multi Tool Allen Key with Tripod Screw Drive
Product Information
Specifications
- Versatile attachable modular camera multi-tool
- A multi-sided tool with #4 Allen Key and Tripod Flat head bit
- The tripod end can be used to open boxes
- Made with high-quality Stainless Steel
- Can be mounted onto equipment or keychain for easy travel
- Can be combined with other DST series tools to customize to your needs
- TSA Safe
Universal Compatibility
The Lions Ark DST series multi-sided Camera tool is perfect for videography, photography, and cinematography applications. It is double-sided, with a #4mm Allen Key and Flat Tripod Head, easily mounts to any equipment with a 1/4-20 thread. Whether combining it with other DST series tools for a customized experience, adding it to your keychain, or mounting it to equipment, have the peace of mind knowing you have it with you on a client shoot! Enjoy the convenience of this robust EDC tool.
Durable Construction
Built with high-quality Stainless Steel materials, the tool is durable and designed to withstand the rigors of various shooting conditions.
WARNING:
The tool is intended for hand tightening, do not attempt us in power tools or
the tool life will be reduced
Product Usage Instructions
Installation Instructions – Attach to Other DST Tools
- Use a #2 head screwdriver for assembly & disassembly.
- Use an adjustable wrench to hold the locking nut while simultaneously installing the bolt.
- After installation, the 4 tool assembly can be attached to your keys or camera bag.
Secure D-Ring Bolt
Secure the D-Ring bolt by hand only. Do not use tools to fasten when attaching to gear.
Attach to Keyring
The tool can also be used with the provided key ring. Simply loop the key ring
into the middle oval-shaped hole, then attach it to your keys.
Using the Tool
- The tripod flat side doubles as a TSA safe box opener.
- Use the Phillips/Flathead combo for any common fasteners on set.
- Use the tripod head for any tripod fastener.
- Use the #4 Allen head for any #4 Allen key fastener.
- Assemble in the 4 tool configuration for added torque if needed. Great configuration for stuck fasteners and everyday use.
INSTALLATION INSTRUCTIONS ATTACH TO OTHER DST TOOLS
Attach the provided key ring to the “D RING LOOP” on the D-Ring ¼-20″ bolt.
Align the notches of both tools, then put the D Ring bolt through the oval
holes and secure it with the provided Nylon locking nut. Torque down until the
tool is securely fastened and is not lost. (Adjustable wrench and #2 flat head
required). This assembly can provide additional torque for any stuck
fasteners.
After installation, the 4 tool assembly can be attached to your keys or camera
bag.
ATTACH T O GEAR WITH ¼ -20 ’’ THREAD
The tool can be attached to any ¼-20″ thread using the provided D-Ring Bolt. As in the above example of the top handle place the tool onto the handle, then thread the provided ¼-20″ D-Ring bolt in BY HAND ONLY. To remove simply flip the D- Ring up and twist to remove.
FAQ
Q: Can I use the tool with power tools?
A: No, the tool is intended for hand tightening only. Using it with power tools will reduce its lifespan.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>