MAGTECH INDUSTRIES ZBSMLA01B08 Wireless Wall Mount Switch Instruction Manual

: June 12, 2024
: MAGTECH INDUSTRIES

Table of Contents

KEY FEATURES:
SPECIFICATION:
Button Pressing Instructions
LED Indicators Status and Sleep/ Wakeup Intervals
WIRING DIAGRAMS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wall-mount Non-Neutral Switch Manual
Standard and Non-Neutral Available

The ATOM Wireless Wall-mount Switch is designed to replace traditional in-wall switch with modern wireless technologies. It is capable of providing multi- functions and allow wirelessly control lighting devices in various platforms. This is a must have components to excel user experiences in the wireless environment.

KEY FEATURES:

Best low power load support, no bypass part or low power light adapter required
Default local circuit operate and do not require system control
20dBm 2.4G for long range communication
Power failure memory to return to its previous set level prior to the interruption of power
Compatible to designer style wall-plates or standard oﬀ-the-shelve wall plates
Fit in 1-gang U.S. wall-box ; 2 1/2″ minimum depth recommended
Non-neutral design make installation easier (ZigBee only)
Available color – White

SPECIFICATION:

Compatibility	ZigBee Pro ; BT 5.0
Input:	110 ~ 277VAC/47-63Hz
Relay switching Capability	5A/120VAC; 3A/277VAC
Operating Environment	0 – 50 Deg. C
Radio Properties	2.4GHz; 20dBm transfer power
Internal Antenna	Built-in
Controls	2 to 8 buttons for on/oﬀ; dim; scene selection
Dimensions	44.40 x 33.20 x 105mm (L x W x H)
Warranty	5 Year

Button Pressing Instructions

| Short press: Sends “ON” instruction to lights that are bound to this switch and also controls its local
Relay to ON position.
---|---
| Press: Send “Step Up” (with On/Oﬀ), and then send “Stop” as soon as released.
| Short press: Send “Recall scene (scene ID=1)”
| Short press: Send “Recall scene (scene ID=3)”
| Short press: Sends “OFF” instruction to lights that are bound to this switch and also controls its local
Relay to OFF position.
| Press: Send “Step Down” (with On/Oﬀ), and then send “Stop” as soon as released.
| Short press: Send “Recall scene (scene ID=2)”
| Short press: Send “Recall scene (scene ID=4)”

Long press (6 seconds or longer) simultaneously until all button indicators are lit, then release the buttons. All button indicators will blink in 1 second interval if factory reset successfully.

LED Indicators Status and Sleep/ Wakeup Intervals

Switch not commissioned| 1. All 8 buttons will blink in 1 second interval when in non-commissioned state.
2. If its local Relay is ON, it stays awake and searches for network for 16 seconds, and then goes to sleep for 20 seconds.
Repeats this iteration until commissioned.
3. If its local Relay is OFF, it stays awake and searches for network for 16 seconds, and then goes to sleep for 20 seconds.
Repeats this iteration for only 15 minutes and then goes to deep sleep, waiting for a manual press to be woken up.
---|---
Switch commissioned| 1. After it joins a network, only the pressed button will be lit.
2. Upon powered on, all 8 buttons blinks for 3 seconds and then oﬀ.