iiyama G-MASTER GB3466WQSU-B1 LED Display User Manual

iiyama G-MASTER GB3466WQSU-B1 LED Display

Thank you very much for choosing the iiyama LCD monitor.

We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.

Iiyama | Servicecard

VALUE FOR MONEY AWARD-WINNER

Dear user, congratulations on your purchase of the iiyama LCD. For details on warranty and locally used pixel policies after installation, please check the iiyama website.

To report a fault, please contact your local support center at www.iiyama.com/service.

Things to check before calling the iiyama information line:

1. Is the power cable securely connected and turned on?
2. Has the display been turned on?
3. Is the signal cable securely connected, and the correct input selected?
4. Has the computer been restarted with the display connected?
5. Is the graphics card correctly installed with the latest drivers?
6. Has the correct native resolution been selected via ‘Display Properties’?
7. Is the R/G/B signal configuration correct?
8. Is the On-Screen Menu shown on the display?
9. Have the correct brightness and contrast settings been set?
10. Have display tolerances and compatibility been considered?
11. Have you performed a Factory Reset/Recall via the On-Screen Menu?

Before reporting a screen defect, please prepare the following information/evidence:

• Model number
• Purchase receipt and serial number
• Name and address for collection
• Telephone/fax number for availability during the day
• Short description of the defect

Important Note: If no fault is found in the collected equipment after inspection, the transferring party shall incur charges for transport and administration.

If you have checked all of the above and there is still no picture, call our information line for assistance in your country.

CE MARKING DECLARATION OF CONFORMITY

• This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU “RoHS Directive”.
• The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises, and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
• IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
• Model No. : PL3466WQ

We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com

You can access the Web page of different countries from there.

• We reserve the right to change specifications without notice.
• All trademarks used in this user manual are the property of their respective owners.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
• Eprel registration number
  G-MASTER GB3466WQSU-B1 : 362126, G-MASTER GB3466WQSU-B1 A : 623873

FOR YOUR SAFETY

SAFETY PRECAUTIONS

WARNING

• STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
• If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the  monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.
• NEVER REMOVE THE CABINET
• High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
• DO NOT PUT ANY OBJECT INTO THE MONITOR
• Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug  your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
• INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
• The monitor may cause an injury if it falls or is dropped.
• DO NOT USE THE MONITOR NEAR WATER
• Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
• OPERATE UNDER THE SPECIFIED POWER SUPPLY
• Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
• PROTECT THE CABLES
• Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.
• ADVERSE WEATHER CONDITIONS
• It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.

CAUTION

INSTALLATION LOCATION

• Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or  smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

• The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

• Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause  fire. To allow adequate air circulation, place the monitor at least 10cm (or 4 inches) from any walls.
• When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
• This may overheat the monitor and may cause fire or damage. Make sure to allow enough  ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on  a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

• When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal  cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE MONITOR

• If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

• To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

• Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

• Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

CAREFUL! PROTECT YOUR HANDS AND FINGERS

• Be careful not to hurt your fingers or hands when you change the height or the angle.
• Injury can occur if care is not taken to avoid finger contact with the display base when adjusting the height. (Just for height adjustable model.)

REMARK FOR 24/7 USAGE

• This product is not specifically designed for 24/7 usage in all environments.

OTHERS

ERGONOMIC RECOMMENDATIONS

• To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
• For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten-minute break every hour is recommended as looking at the screen continuously can cause eye strain.

SPECIAL NOTES ON LCD MONITORS

• The following symptoms are normal with LCD monitors and do not indicate a problem.
• NOTE: When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen can be recovered slowly by changing the image or turning off the Power Switch for some hours.

CUSTOMER SERVICE

• NOTE:   If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service centre for advice or replacement packaging.

CLEANING

• WARNING:   If you drop any materials or liquids such as water into the monitor when cleaning,  unplug the power cable immediately and contact your dealer or iiyama service centre.
• CAUTION:   For safety reasons, turn off the power switch and unplug the monitor before you clean it.
• NOTE:   To protect the LCD panel, do not scratch or rub the screen with a hard object.
• Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.
• Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.
  • Thinner
  • Benzine
  • Abrasive cleaner
  • Spray-type cleaner
  • Wax
  • Acid or Alkaline solvent

CABINET

• Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
• Then wipe the cabinet with a soft dry cloth.

LCD SCREEN

• Periodic cleaning with a soft dry cloth is recommended.
• Don’t use tissue paper etc. because these will damage the LCD screen.

BEFORE YOU OPERATE THE MONITOR

FEATURES

• Supports Resolutions up to 3440 × 1440
• High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness 400cd/m2 (Typical) : G-MASTER GB3466WQSU-B1
• High Contrast 4000:1 (Typical), Adv. Contrast Function Available / Brightness  420cd/m2 (Typical) : G-MASTER GB3466WQSU-B1 A
• Supports AMD FreeSyncTM Premium Pro certified Range 48Hz – 144Hz, with HDR400 Technology
• Flicker – Free
• Quick Response Time 4ms (Gray to Gray) with OverDrive
• Moving Picture Response Time 1ms
• Blue Light Reducer
• Digital Character Smoothing
• 2 × 3W Stereo Speakers
• Standby Feature (VESA DPMS Compliant)
• VESA Mounting Standard (100mm×100mm) Compliant
• Keyhole for Security Lock

CHECKING THE CONTENTS OF THE PACKAGE

The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.

• Power Cable*
• HDMI Cable
• DisplayPort Cable
• USB Cable
• Stand-Base with a screw
• Stand-Neck
• Screw (4pcs) & Screwdriver (for Stand-Neck)
• Safety Guide
• Quick Start Guide

CAUTION

• The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used. However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.
• An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be used.

INSTALLATION

WARNING: Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the monitor and the mount.

< WALL MOUNTING >

WARNING: When you use with the wall mounting, in consideration of thickness of the mounting  stage, tighten the M4 Screws (4pcs) with washer which “L” length is 13mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor.

< ROTATING THE DISPLAY >

The monitor is designed to be compatible in landscape mode.

FITTING AND REMOVAL OF BASE

CAUTION

• Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
• Do not give a strong impact to the monitor. It may cause damage.
• Unplug the monitor before removal or installation to avoid an electric shock or a  damage.

As shown below, place all the contents taken out from the carton box on a flat surface with the monitor front face down.

Combine the Stand-Neck and the Stand-Base

Use the ‘thumb screw’ provided to secure the base to the Stand-Neck.

Remove the rear cushion

Attach the Stand to the monitor(VESA holes) and secure it in using the provided screws and screwdriver.

< Removal>

• Place the front side cushion on a flat surface and place the monitor with face down on it.
• Remove the screws to remove the Stand from the monitor(VESA holes).
• Loosen the ‘thumb screw’ to remove the Stand-Base from the Stand-Neck.

CONTROLS AND CONNECTORS

1. Navigation button
2. Power Switch / Menu / Power Indicator
3. Note:
4. White : Power off
5. Blue: Normal operation
6. Orange: Standby mode
7. Scroll Up / Input Select [ ]
8. Scroll Down [ ]
9. Left / ECO Mode [ ]
10. Right / Volume [ ]
11. USB Downstream Connector ( , 3.0 x 2, total: 5V, 900mA)
12. USB Upstream Connector ( IN)
13. Headphone connector ( )
14. DisplayPort Connector ( 1)
15. DisplayPort Connector ( 2 )
16. HDMI Connector (HDMI2)
17. HDMI Connector (HDMI1)
18. AC Connector(~ : Alternating current) (~ )
19. Keyhole for Security Lock
20. You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
21. Speakers

CONNECTING YOUR MONITOR

• Ensure that both the computer and the monitor are switched off.
• Connect the computer to the monitor with the signal cable.
• Connect the computer to the monitor with the USB Cable.
• Connect the Power Cable to the monitor first and then to the power source.
• Turn on your monitor and computer.
• NOTE
  • Make sure that the building installation has a circuit breaker of 120/240V, 20A (maximum).
  • The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
  • Make sure you tighten the finger screws at each end of the signal cable.
  • The Class I pluggable equipment Type A must be connected to protective earth.
  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
  • Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.

[Example of Connection]

COMPUTER SETTING

Signal Timing

Change to the desired signal timing listed on page 29: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

• For optimal viewing it is recommended to position yourself directly opposite to the full face  of the monitor, then adjust the monitor’s height and angle to your own preference.
• Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
• You are able to adjust the monitor’s height up to 110mm, 20° upward and 5° downward.
  • Do not touch the LCD screen when you change the height or the angle. It  may cause damage or break the LCD screen.
  • Careful attention is required not to pinch your fingers or hands into the moving part of the stand when you change the height or the angle.
  • Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height.

OPERATING THE MONITOR

• To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below.
• Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the / Buttons.
• Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the MENU Button. Then, use the / Buttons to highlight the desired adjustment icon.
• Press the MENU Button again. Use the / Buttons to make the appropriate adjustment or setting.
• Press the Button to leave the menu, and the settings you just made would be automatically saved.
• For example, to correct for OSD vertical position, select Menu item of OSD and then press the MENU Button. Then, select OSD Vertical Position by using the / Buttons. An adjustment page appears after you press the MENU Button.
• Then, use the / Buttons to change the OSD vertical position settings. The OSD vertical position of the overall display should be changing accordingly while you are doing this.

Press the Button lastly, it ends, all changes are saved in the memory.

NOTE

• When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD Time has passed. Also, press the button to quickly turn off the On-Screen Display.
• Any changes are automatically saved in the memory when the On Screen Display disappears.
• Turning off the power should be avoided while using the Menu.
• All adjustments have only one setting which applies to all signal timings.

ADJUSTMENT MENU CONTENTS

Picture Adjust

Too intense

Contrast *2

|  | Too dark Too bright

ECO *2

|

Direct

|  | Off| Normal
 | Mode1| Brightness of back-light is reduced.
 | Mode2| Brightness of back-light is reduced more than Mode1.
 | Mode3| Brightness of back-light is reduced more than Mode2.

Blue Light Reducer *2

|  | Off| Typical
 | Mode1| Blue light is reduced.
 | Mode2| Blue light is reduced more than Mode1.
 | Mode3| Blue light is reduced more than Mode2.
Adv. Contrast *2|  | On| Increased Contrast Ratio
 | Off| Typical Contrast Ratio

Overdrive *2

|  | Off / -2 / -1 / 0 / +1 / +2

It will improve the gray level response time of the LCD panel.

A higher level results in a faster response time.

MBR *2

|  | Off / -2 / -1 / 0 / +1 / +2

It will improve the moving picture response time of the LCD panel.

A higher level results in a faster response time.

Black Tuner

|  | From -5 to +5

You can adjust Dark shades.

Direct

• You can skip the Menu items and directly display an option setting screen by using the following button operations.
• •ECO : Press the Button when the Menu is not displayed

Color Saturation

|  | Too weak Too strong
Gamma *2|  | You can set the Gamma.

1.8 / 2.2 / 2.6

Color Setting

Color Temp. *1

|  | Cool| Cool color
 | Normal| Normal color
 | Warm| Warm color
 | sRGB *2| sRGB
NOTE n sRGB is an international standard which defines and unifies the difference of color

appearance between equipment.

n You can not adjust the Contrast, Brightness, i-Style Color, Adv. Contrast, Eco, Gamma and Blue Light Reducer during sRGB mode because those settings are locked.

User Preset *1

|  | Red| Too weak Too strong
 | Green
 | Blue

i-Style Color *1

|  | Off| Return to a state set by color adjustment except i-Style Color.
 | Standard| For general windows environment and monitor default setting.
 | Sport Game| For Sports game environment.
 | FPS Game| For FPS game environment.
 | Strategy Game| For Strategy game environment.
 | Text| For text editing and viewing in a word processing environment.
 | User Mode 1| Applies customized monitor settings.
 | User Mode 2| Applies customized monitor settings.
 | User Mode 3| Applies customized monitor settings.

• *1 Adjustable / settable items depend on which item is activated. See page 23 Function Correlation Matrix for more details.
• *2 sRGB is disabled when ECO is activated.

Image Adjust

Sharp and Soft

|  | 1 2 3 4 5 6

You can change the picture quality from 1 to 6 (sharp to soft).

Press the  Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.

HDMI RGB Range

|  | Auto| Automatically select color scale signal.
 | Full| For full-range color scale signal
 | Limited| For limited color scale signal
Direct Drive Mode *1,3,4,|  | On| Reduce the input-lag.
 | Off| Typical
NOTE **** Changing Resolution and Refresh rate or turning Power Off/On might disable the Direct

Drive function.

Video Mode Adjust *4,5

|  | Full Screen| Expansion display
 | Aspect Ratio 2| Expansion display of Aspect
 | Dot by Dot 2| Display the picture dot by dot

HDR *1

|  | On| For HDR (High Dynamic Range) signal
 | Off| For normal signal
 | Auto| Automatically switch to HDR signal
FreeSync *5,6|  | On| Enable the FreeSync function.
 | Off| The FreeSync function is turned off.

• *1 Adjustable / settable items depend on which item is activated. See page 23 Function Correlation Matrix for more details.
• *2 Option unavailable with 21:9 resolution.
• *3 Direct Drive Mode is disabled when Overdrive is activated.
• *4  Direct Drive Mode and Video Mode Adjust are disabled when FreeSync is activated.
• *5  FreeSync and Video Mode Adjust are disabled when Direct Drive Mode is activated.
• *6 FreeSync is disabled when MBR is activated.

OSD

OSD Horizontal Position

|  | OSD is too left

OSD is too right

OSD Vertical Position

|  | OSD is too low OSD is too high

OSD Time

|  | You can set the OSD display duration time between               5 and 30 seconds.

Language

Language

|  | English| English|  | Español| Spanish
 | Français| French|  | Nederlands| Dutch
 | Deutsch| German|  | Ĉesky| Czech
 | Italiano| Italian|  |  | Russian
 | Polski| Polish|  |  | Japanese

Miscellaneous

Opening Logo

|  | On| iiyama Logo displayed when the monitor is turned on.
 | Off| iiyama Logo does not display when the monitor is turned on.
LED|  | On| The Power Indicator is turned On.
 | Off| The Power Indicator is turned Off.
NOTE Turn Off the Power Indicator when you are bothered by the light.

Display Information

|  | Displays information regarding the current input signal coming from the graphic card in your computer.

NOTE See your graphic card user guide for more information about changing the resolution and refresh.

PiP/PbP *

|  | Off| PiP/PbP Mode is turned off.
 | PiP| Display the sub screen in the main screen.
 | PbPLF| Divide display images in Right/Left.
 | PbPFL| Swap images in Right/Left of the PbPLF screens.

PiP Position

|  | Top-Right| Move the sub screen to the top right corner.
 | Top-Left| Move the sub screen to the top left corner.
 | Bottom-Right| Move the sub screen to the bottom right corner.
 | Bottom-Left| Move the sub screen to the bottom left corner.
 | Swap| Swap Main/Sub screens.

PiP Size

|  | Middle| Normal size
 | Large| Increase the size of the Sub screen.
 | Small| Reduce the size of the Sub screen.

• • PiP = Picture In Picture
• With this function, you can display two different pictures.
• PbP = Picture By Picture
• With this function, you can display max. four different pictures.
  • djustable / settable items depend on which item is activated. See page 23 Function Correlation Matrix for more details.
  • iP/PbP can not be selected when FreeSync is activated.

Input Select

Input Source

|

Direct

| Auto| Search for an available input source and select automatically.

Manual

| DP1| Select the Digital (DisplayPort1) input.
DP2| Select the Digital (DisplayPort2) input.
HDMI1| Select the Digital (HDMI1) input.
HDMI2| Select the Digital (HDMI2) input.
NOTE **** At selected the AUTO, it will automatically be selected when just one source is available. If there are more input sources available and you select one of them, the AUTO option is not available.

If multiple inputs are connected, the monitor may not recover the last one used after

turning it off and on again.

It is only possible when you set a specific source.

Sub Source

| DP1| Select the Digital (DisplayPort1) input.
DP2| Select the Digital (DisplayPort2) input.
HDMI1| Select the Digital (HDMI1) input.
HDMI2| Select the Digital (HDMI2) input.
DisplayPort Mode *| 1.2| Standard
1.4| To be used when displaying 3440×1440 144Hz.

• DisplayPort Mode is disabled when FreeSync is activated.

Direct

• You can skip the Menu items and directly display an option setting screen by using the following button operations.
• Input Source: Press the  Button when the Menu is not displayed

Audio Setting

Direct

|  | Too soft Too loud|
Mute Audio|  | On| Turn off the sound temporarily.
 | Off| Return the sound volume to the previous level.

Audio Input

|  | DP1| Select the Digital (DisplayPort1) input.
 | DP2| Select the Digital (DisplayPort2) input.
 | HDMI1| Select the Digital (HDMI1) input.
 | HDMI2| Select the Digital (HDMI2) input.

Direct

You can skip the Menu items and directly display an adjustment scale by using the following button operations.

• Volume : Press the Button when the Menu is not displayed.

Store User Setting

User Modes

|  | User Mode 1| Save the settings of the screen adjustment.
 | User Mode 2| Save the settings of the screen adjustment.
 | User Mode 3| Save the settings of the screen adjustment.
NOTE **** You can memorize your customized monitor settings.

The following settings can be memorized:

Contrast, Brightness, Overdrive, Adv. Contrast, ECO, Volume, Mute Audio, Color Setting, Sharp and Soft, Black Tuner, Video Mode Adjust

Recall

Recall All

|  |

Factory-preset data is restored.

Function Correlation Matrix

• Available
• -: Not available

Lock Mode

< OSD Menu>

1. The OSD lock will be activated by pressing the button for 5 seconds. If you try to access the OSD by pressing any of the buttons, message “OSD Locked” will appear on the screen.
2. The OSD lock will be deactivated by pressing the button again for 5 seconds.

< Power Switch>

1. The power switch lock will be activated by pressing the button for 5 seconds. Locking the power switch means that won’t be able to turn off the Monitor while the power switch is locked. If you press the power switch, the message “Power Button Locked” will appear on the screen.
2. The power switch lock will be deactivated by pressing the button again for 5 seconds.

STANDBY FEATURE

• The standby feature of this product complies with the power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use.
• To use the feature, the monitor needs to be connected to a VESA DPMS-compliant computer. There is a standby step the monitor takes as described below. The standby function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured.

Standby Mode

When the video signal from the computer is off, the monitor enters into Standby Mode which reduces the power consumption to less than 0.5W*. The screen becomes dark, and the power indicator turns to orange. From Standby Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.

USB peripherals and audio equipment are not connected.

NOTE: Even when using the standby mode, the monitor consumes electricity. Turn off the Power Switch whenever the monitor is not in use, during the night and on weekends, to avoid unnecessary power consumption.

TROUBLESHOOTING

If the monitor fails to operate correctly, please follow the steps below for a possible solution.

1.  Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.
3. If you are experiencing a problem that is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.

RECYCLING INFORMATION

• For better environment protection please don’t dispose of your monitor.
• Please visit our website: www.iiyama.com to monitor recycling.

APPENDIX

Design and specifications are subject to change without prior notice.

SPECIFICATIONS

G-MASTER GB3466WQSU-B1

LCD

Panel

| Panel technology| VA
Size| Diagonal: 34″ (86.425cm)
Pixel pitch| 0.23175mm H × 0.23175mm V
Brightness| 400cd/m2 (Typical)
Contrast ratio| 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle| Right / Left : 89° each, Up / Down : 89° each (Typical)
Response time| 4ms (Gray to Gray) with OverDrive, 14ms (Typical)
MPRT| 1ms
Display Colors| Approx. 16.7M

Sync Frequency

| HDMI1/2(without FreeSync):

Horizontal: 30.0-160.0kHz, Vertical: 48-100Hz

HDMI1/2(with FreeSync):

Horizontal: 89.0-160.0kHz, Vertical: 60-100Hz

DisplayPort1/2(without FreeSync):

Horizontal: 30.0-214.0kHz, Vertical: 48-144Hz

DisplayPort1/2(with FreeSync):

Horizontal: 89.0-214.0kHz, Vertical: 60-144Hz

Native Resolution| 3440 × 1440, 4.9 MegaPixels
Support max. resolution| HDMI1/2: 3440 × 1440 100Hz

DisplayPort1/2: 3440 × 1440 144Hz

Input Connector| HDMI × 2, DisplayPort × 2
Plug & Play| VESA DDC2BTM
Input Video Signal| HDMI, DisplayPort
USB Standard| USB3.0 x 2 (total: DC5V, 900mA)
Number of USB Ports Connector shape| 1 Upstream: Series B

2 Downstream: Series A

Headphone Connector| ø 3.5mm mini jack (Stereo)
Speakers| 3W × 2 (Stereo speakers)
Maximum Screen Size| 797.22mm W × 333.72mm H / 31.4″ W × 13.1″ H
Power Source| 100-240VAC, 50/60Hz, 1.0A
Power Consumption*| 60W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight| 808.0× 441.5 – 551.5 × 256.0mm / 31.8 × 17.4 – 21.7 × 10.1″ (W×H×D)

10.9kg / 24.0lbs

Tilt Angle| Upward: 20° Downward: 5°

Environmental Considerations

| Operating:    Temperature    5 to 35°C / 41 to 95°F Humidity          10 to 80% (No condensation)

Storage:      Temperature    -20 to 60°C / -4 to 140°F

Humidity          5 to 85% (No condensation)

Approvals| CE, UKCA, EAC

NOTE * USB peripherals and audio equipment are not connected.

G-MASTER GB3466WQSU-B1 A

LCD

Panel

| Panel technology| VA
Size| Diagonal: 34″ (86.425cm)
Pixel pitch| 0.23175mm H × 0.23175mm V
Brightness| 420cd/m2 (Typical)
Contrast ratio| 4000: 1 (Typical), Adv. Contrast Function Available
Viewable angle| Right / Left: 89° each, Up / Down: 89° each (Typical)
Response time| 4ms (Gray to Gray) with OverDrive, 11ms (Typical)
MPRT| 1ms
Display Colors| Approx. 16.7M

Sync Frequency

| HDMI1/2(without FreeSync):

Horizontal: 30.0-160.0kHz, Vertical: 48-100Hz

HDMI1/2(with FreeSync):

Horizontal: 89.0-160.0kHz, Vertical: 60-100Hz

DisplayPort1/2(without FreeSync):

Horizontal: 30.0-214.0kHz, Vertical: 48-144Hz

DisplayPort1/2(with FreeSync):

Horizontal: 89.0-214.0kHz, Vertical: 60-144Hz

Native Resolution| 3440 × 1440, 4.9 MegaPixels
Support max. resolution| HDMI1/2: 3440 × 1440 100Hz

DisplayPort1/2: 3440 × 1440 144Hz

Input Connector| HDMI × 2, DisplayPort × 2
Plug & Play| VESA DDC2BTM
Input Video Signal| HDMI, DisplayPort
USB Standard| USB3.0 x 2 (total: DC5V, 900mA)
Number of USB Ports Connector shape| 1 Upstream: Series B

2 Downstream: Series A

Headphone Connector| ø 3.5mm mini jack (Stereo)
Speakers| 3W × 2 (Stereo speakers)
Maximum Screen Size| 797.22mm W × 333.72mm H / 31.4″ W × 13.1″ H
Power Source| 100-240VAC, 50/60Hz, 1.0A
Power Consumption*| 60W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight| 808.0× 441.5 – 551.5 × 256.0mm / 31.8 × 17.4 – 21.7 × 10.1″ (W×H×D)

10.9kg / 24.0lbs

Tilt Angle| Upward: 20° Downward: 5°

Environmental Considerations

| Operating:    Temperature    5 to 35°C / 41 to 95°F Humidity          10 to 80% (No condensation)

Storage:      Temperature    -20 to 60°C / -4 to 140°F

Humidity          5 to 85% (No condensation)

Approvals| CE, UKCA, EAC

NOTE * USB peripherals and audio equipment are not connected.

DIMENSIONS

COMPLIANT TIMING

Video Mode| Horizontal

Frequency

| Vertical

Frequency

| Dot Clock
---|---|---|---
800 × 600| 37.879kHz| 60.317Hz| 40.000MHz
46.875kHz| 75.000Hz| 49.500MHz
1024 × 768| 48.363kHz| 60.004Hz| 65.000MHz
60.023kHz| 75.029Hz| 78.750MHz
1280 × 1024| 79.980kHz| 75.020Hz| 135.000MHz
1440 × 900| 55.935kHz| 59.887Hz| 106.500MHz
1600 × 1200| 75.000kHz| 60.000Hz| 162.000MHz
1680 × 1050| 65.290kHz| 60.000Hz| 146.250MHz
1920 × 1080| 66.590kHz| 59.930Hz| 138.500MHz
1920 × 2160| 133.293kHz| 59.988Hz| 277.250MHz
2560 × 1440| 88.787kHz| 59.951Hz| 241.500MHz
3440 × 1440| 160.000kHz| 100.000Hz| 535.000MHz
214.000kHz| 144.000Hz| 768.000MHz

NOTE

• *1 Recommended to use on PbP mode.
• *2 HDMI input only. The source graphic card must be capable of supporting 3440 × 1440 resolution at 100Hz.
• *3 DisplayPort input only. The source graphic card must be capable of supporting 3440 ×  1440 resolution at 144Hz.
• The DisplayPort Mode setting has to be enabled as 1.2 or 1.4.

Frequently Asked Questions

What is the iiyama G-MASTER GB3466WQSU-B1 LED Display known for?

The iiyama G-MASTER GB3466WQSU-B1 is renowned for its exceptional gaming performance and immersive display quality.

Is the iiyama G-MASTER GB3466WQSU-B1 suitable for professional use as well?

Yes, it's a versatile display suitable for both gaming and professional applications, thanks to its high resolution and color accuracy.

What size is the iiyama G-MASTER GB3466WQSU-B1 LED Display?

It boasts an impressive 34-inch screen size, providing an expansive viewing experience.

What is the maximum resolution of the iiyama G-MASTER GB3466WQSU-B1?

The display offers a maximum resolution of 3440 x 1440 pixels (WQHD) for sharp visuals.

Does the iiyama G-MASTER GB3466WQSU-B1 support high refresh rates for gaming?

Yes, it supports a high refresh rate of 144Hz, ensuring smooth and responsive gameplay.

Can I expect vibrant and accurate colors from iiyama G-MASTER GB3466WQSU-B1 iiyama LED display?

Absolutely, it features an IPS panel with excellent color reproduction and wide viewing angles.

What is the contrast ratio of the iiyama G-MASTER GB3466WQSU-B1?

It offers a high contrast ratio of 3000:1, delivering deep blacks and vivid whites.

Is the iiyama G-MASTER GB3466WQSU-B1 suitable for multi-monitor setups?

Yes, its ultra-wide format makes it ideal for multi-monitor gaming or productivity setups.

What connectivity options are available on the iiyama G-MASTER GB3466WQSU-B1?

It includes various ports like HDMI, DisplayPort, USB hubs, and audio jacks for versatile connectivity.

Does iiyama G-MASTER GB3466WQSU-B1 iiyama LED display feature adaptive sync technology for smoother gaming?

Yes, it supports AMD FreeSync Premium for tear-free gaming experiences.

Can I adjust the height and angle of the iiyama G-MASTER GB3466WQSU-B1 for ergonomic viewing?

Yes, it offers a fully adjustable stand, allowing you to customize the height, tilt, and swivel.

Does the display come with built-in speakers?

Yes, it features integrated stereo speakers, eliminating the need for external audio devices.

Download The PDF link:iiyama G-MASTER GB3466WQSU-B1 LED Display User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>