Littleone NP188A Smart Bottle Instruction Manual
- June 16, 2024
- Littleone
Table of Contents
- Introduction to Littleone Smart Bottle Pro
- Important Safety Instructions
- Components and Assembly
- Initial Setup and Charging
- Operating Your Smart Bottle Pro
- Cleaning and Maintenance
- Troubleshooting Common Issues
- Warranty and Customer Support
- Compliance Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Instruction Manual
Smart Bottle Pro
NP188A
Welcome to the Littleone Family!
Congratulations on choosing the Littleone Smart Bottle Pro – the next
generation baby bottle designed to provide optimal nutrition and feeding
comfort for your baby. This instruction manual will guide you through the
features, use, and maintenance of your new Smart Bottle Pro.
Introduction to Littleone Smart Bottle Pro
The Littleone Smart Bottle Pro combines innovative technology with the comfort and convenience of a traditional baby bottle. It is equipped with features like real-time temperature control, feeding duration tracking, and volume measurement, all designed to make feeding time easier and more enjoyable.
Important Safety Instructions
- Always supervise your baby during feeding.
- Do not use the bottle if any component appears damaged.
- Avoid direct exposure to sunlight and extreme temperatures.
- Read all instructions carefully before use.
Components and Assembly
Your Smart Bottle Pro comes with the following components:
- Bottle base with electronic components
- Silicone nipple
- Bottle cap
- USB charging cable
To assemble, attach the silicone nipple to the bottle cap, then screw the assembled cap onto the bottle base. Ensure all parts are securely fastened before use.
Initial Setup and Charging
Before the first use, charge your bottle using the provided USB cable. A full charge takes approximately 2 hours. The LED indicator will show a green light when fully charged.
Operating Your Smart Bottle Pro
- Turning On/Off: Press and hold the power button for 3 seconds.
- Setting the Temperature: Press the temperature button to select the desired setting.
- Monitoring Feed: The bottle records feeding duration and the amount consumed.
Cleaning and Maintenance
- Disassemble all parts and wash with warm soapy water.
- Rinse thoroughly and air dry.
- Do not immerse the electronic base in water.
- Sterilize the nipple and bottle cap as needed.
Troubleshooting Common Issues
- If the bottle does not turn on, ensure it is charged.
- For temperature inaccuracies, recalibrate using the settings in the Littleone mobile app.
- If sync issues occur, check your Bluetooth connection and the app for updates.
Warranty and Customer Support
Your Littleone Smart Bottle Pro comes with a one-year warranty covering
defects in materials and workmanship. For customer support, please contact us
at [insert contact details].
Keep this manual for future reference and ensure safe and enjoyable use of
your Littleone Smart Bottle Pro. Happy feeding!
Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Radiation Exposure: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment and can be used without any
restrictions.
Technical specifications:
Operating frequency: 2402-2480MHz
Max. RF output power: <0dBm
Hardware version: Rev 1.2
Software version: 10350079
Operating temperature: -20℃ to +50℃
The product can be used in EU countries without any restrictions.
EU Regulatory Conformance:
Hereby, we (Littleone Inc) declared that this device is in compliance with the
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.littleone.io
Correct disposal:
**** Do not dispose of this product with the normal household waste at the
end of its life cycle. Return it to a collection point for the recycling of
electrical and electronic devices.
This is indicated by the symbol on the product, user manual or packaging. The
materials are reusable according to their markings. By reusing, recycling or
other forms of utilisation of old devices you make an important contribution
to the protection of our environment. Please contact your local authorities
for details about collection points.
Manufacturer: Littleone Inc
Address: F20, 8 Seongnamdaero 331 beon-gil, Bundang, Seongnam, Gyeonggi, Korea
US Representative:
Company name: Littleone Platform Inc
Address: 3003 N 1st Street #221, San Jose, CA 95134
Te l : 213-328-6543
Email: blee@littleone.io
Web: www.littleone.io
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>