ICOMON FG2305ULB Smart Body Fat Scale Instruction Manual

ICOMON FG2305ULB Smart Body Fat Scale

Product Information

Specifications:

• Model: FG2305ULB
• Measurement Capabilities: Body weight, Partial body fat & Skeletal muscle, BMI, Body fat rate, Visceral fat, Body water, Skeletal muscle rate, Muscle mass, Bone mass, Protein, BMR, Body age, and more
• Supported Platforms: iOS (version 8.0 or higher), Android (version 6.0 or higher)
• Maximum Users: 24 per account

Product Usage Instructions

Step 1: Download the App
To start using the Smart Body Fat Scale, scan the QR Code in the user manual to download the Fitdays App.

Step 2: Account Setup
Create a new user account in the Fitdays App or click on “Account” and then “Add User” to add personal data. The Smart Scale can recognize which user is stepping on it and remind the user to switch to the correct user. Each account can support up to 24 users.

Step 3: Initial Measurement
For first-time use by every user, it is necessary to use the scale in online mode and connect it with the App for successful measurement. Follow these steps:

1. Turn on Bluetooth on both the scale and your smartphone.
2. In the Fitdays App, click on “Account”, and then “Device + Searching Bluetooth” to start pairing.
3. Keep the scale on and wait for your phone to connect with the scale.

Step 4: Taking Measurements
To ensure accurate measurements, follow these guidelines:

• Make sure you are barefoot to measure body fat.
• Pay attention to the correct handlebar grip posture during measurement.
• Ensure that your feet and the scale are both dry.
• Stand on the scale for approximately 30 seconds until the number on the display stops flashing.

Step 5: Troubleshooting
If you encounter any issues, refer to the troubleshooting guide provided:

1. Bluetooth not connected: Check that both the scale and smartphone have Bluetooth turned on. Make sure your smartphone’s iOS version is 8.0 or higher / Android version is 6.0 or higher. Follow the pairing instructions in the App.
2. No body fat data measured when weighing: Ensure you are barefoot and maintain the correct handlebar grip posture. Make sure your feet and the scale are dry. If the number display is flashing, continue standing on the scale for around 30 seconds until the display stops flashing. Check that Bluetooth is turned on and not paired with a different scale.
3. The scale is producing inconsistent weight: Check that the scale is on a hard, flat surface. Ensure nothing is stuck to the bottom of each sensor foot on the back. Press the power button to restart the scale.
4. The App displays the incorrect fat-muscle ratio: Verify that you have entered the correct gender, height, and age in the body parameter settings of the App.
5. How to re-calibrate the scale after moving it or changing the batteries: Step on the scale to turn it on and let it automatically drop to 0.0kg to calibrate.
6. The scale does not turn on: Remove the batteries and re-insert them in the correct direction.
7. The scale only shows weight & BMI: For first-time use by every user, make sure to use the scale in online mode and connect it with the App. Hold the handlebar with the correct grip posture, ensuring the thumb and four fingers make contact. Keep feet apart, bear feet onto the scale platform, and face the display direction. Stand still for about 20-30 seconds to complete the measurement.

Frequently Asked Questions (FAQ):

• Q: How many users can be added to a single account?
  A: Each account can support up to 24 users.

• Q: What are the measurement capabilities of the Smart Body Fat Scale?
  A: The scale can measure body weight, partial body fat & skeletal muscle, BMI, body fat rate, visceral fat, body water, skeletal muscle rate, muscle mass, bone mass, protein, BMR, body age, and more.

• Q: How do I re-calibrate the scale after moving it or changing the batteries?
  A: Step on the scale to turn it on and let it automatically drop to 0.0kg to calibrate.

• Q: Why is the scale only showing weight & BMI?
  A: For first-time use by every user, make sure to use the scale in online mode and connect it to the App. Hold the handlebar with the correct grip posture, ensuring the thumb and four fingers make contact. Keep feet apart, bear feet onto the scale platform, and face the display direction. Stand still for about 20-30 seconds to complete the measurement.

Download APP

Scan the QR Code to download APP

Thanks for choosing Smart Body Scale. This full body composition scale can help you conveniently measure body weight, Partial body fat & Skeletal muscle, BMI, Body fat rate, Visceral fat, Body water, Skeletal muscle rate, Muscle mass, bone mass, Protein, BMR, Body age, etc.

IMPORTANT:
Please read the instructions in this manual carefully before using the device. Failure to comply with the instructions given in the manual or using this scale in ways other than the ones mentioned in this manual may result in injury to yourself or damage to the scale.

Fitdays APP Functions

• Weight
• Muscle weight
• Body age
• Protein rate
• Partial body fat
• Body fat
• Bone mass
• Muscle
• Subcutaneous fat
• Partial muscle rate
• Visceral fat
• Water weight
• Standard weight
• Height record (<16 years old)
• Protein mass
• BMR
• Without fat
• BMI
• Degree of obesity
• BFR

INDICATION SYMBOLS

it again to repeat the measuring process.

WHAT’S IN THE PACKAGE

• 1 X Smart body fat scale
• 1 X User manual

TFT Display

WARNING

• DO NOT use with medical implants such as pacemakers.
• DO NOT stand on the edge of the scale or jump on it;
• DO NOT overload the scale (Max.180kg)
• DO NOT drop the scale or drop objects on it as this may damage the sensors.
• DO NOT immerse the scale in water or use chemical cleaning agents. Clean the scale with a slightly damp cloth.
• Not recommended for pregnant women.
• Not recommended for infants, toddlers, and children under 10 years of age.
• Any measurement obtained using this device is for reference only and should not be considered as a medical opinion.
• Consult your primary care doctor or physician before making changes to your diet, exercise plan or physical activities.
• Always place the scale on a hard, dry and flat surface before measurement.
• Make sure your feet are dry before stepping on the scale.
• Connect the batteries per the correct polarities indicated.
• Remove batteries if the scale is not used for a prolonged period.

SPECIFICATION

• Weight unit: kg/lb/st (switch the units via APP setting)

• Weight limit: 6 180kg

• Power Supply: 300mAh rechargeable battery

• Account number: No limitation (each account can add 24 persons)

• Height Record: Allows you to record the height info under 16 years old
  Operating temperature: 10 40 ºC

• Operation humidity: 20%-90%

Support Devices:

• iOS 8.0 or higher
• Android 6.0 or higher

Install Fitdays App

1. Sea r ch Fitdays in the App Store or Google Play or scan the QR Code below:
2. Download and install the App on your device.
3. The App icon will appear on your phone or tablet after the installation is completed.

Special selling points:

1. This model features a colourful LED display and offers offline functionality. Setting up the scale and connecting it with the app is crucial for the initial use to analyze body fat and other parameters. However, after the initial setup, you can conveniently measure body fat, BMI, and body types without the need to connect with the app every time. The LED display on the scale allows you to view these measurements. It’s important to note that offline measurement will not be activated if there is a weight difference greater than 2kg compared to the last measurement.
2. During offline mode, any successful measurement results will be automatically synchronized with your app during the next connection between the scale and the app. This ensures that your data is seamlessly updated and accessible for further analysis and tracking.

How to use Fitdays APP

1. Press the button beside the USB recharging port to switch the scale on.

2. Place the scale on the hard, flat ground. Turn on Bluetooth on your smartphone or tablet.

3. Register your ID by email or social media account for Fitdays App.

4. Add personal data and confirm OK;
   Note: Enter the wrong gender, age, or height info may result in the measurement being inaccurate.

5. Pair the scale through Bluetooth. Click Account Device + Searching Bluetooth for paring to find the scale (Keep scale on) and now your phone is connected with the scale;
   After connection, connected will be indicated on Main page, top position;
   If disconnected is shown, means failure for pairing. Please repeat the above steps.

6. Tap your foot on the scales to activate the display. Wait until the display shows “0.0” (kg/lb/st).

   • Keep Fitdays App on the main page;
   • Then Bluetooth connection icon will be shown on the LED display.
   • The connected indication will be shown on the main page at the same time.

7. Step onto the scale with bare feet;
   At the same time, make sure your fingers are in full touch with the four electrodes on the handlebar (Pay attention to Left & Right directions), at the same time, stand on each two electrodes’ metal plate with bare feet as the below indication photos;
   Please pay attention to handlebar posture, especially for the thumb position and four finger position, and make sure both of them are in full contact with metal electrodes, and with the correct side. Note:
   If stepping on the scale with socks, or weighing posture is not correct, only weight and BMI will be measured and displayed on the main page. To get complete data, please step on the scale with bare feet, and grip the handle bar with correct posture.

8. The number on the display is flashing when the scale is weighing and analyzing. Please stand still and keep the same posture for about 30S;

   • The app will show the measurement schedule and music playing during body fat measurement.
   • After the measurement is finished, you can check more data from the App.
     At the same time, you can track 7 core data on the TFT screen also, including body fat rate, BMI, weight, Body water rate, Bone mass, muscle, and visceral fat:

9. You can click More Data to read more Parameter data. You can click the below icon to read the detail body composition analysis report for your measurement.

10. You can find the analyzing report on Body Weight, BMI, BFR, Muscle, Bone Mass etc. When you click Record, you can see your long-term track chart form.

11. Add, switch user by clicking ->Add User, or click Account–> Add User, then add personal data. The Smart Scale can recognize which user is stepping on it and remind the user to switch to the correct user. Each account can support 24 users;

12. During measurement, scale will show as below:

TROUBLESHOOTING GUIDE

1. Bluetooth not connected

   • The scale and smartphone must both have Bluetooth on.
   • Check the iOS version of your smartphone, it must be iOS 8.0 or higher/Android 6.0 or higher.
   • Click Account Device + Searching Bluetooth for paring to find the scale (Keep scale on status) and now your phone is connected with the scale;

2. No body fat data was measured when weighing

   • The user must be barefoot to measure the body fat.
   • Do pay attention to correct handlebar grip posture during measurement.
   • Make sure your feet and the scale are both dry.
   • The scale does not finish weighing when the number display is flashing (Keep standing on the scale for around 30 seconds until the number on the display stops flashing).
   • Bluetooth is not turned on.
   • Bluetooth is paired with a different scale.

3. The scale is producing inconsistent weight.

   • Check whether the scale is on a hard, flat surface.
   • Check each sensor foot on the back to make sure nothing is stuck to the bottom of it.
   • Press the power on button again;

4. The App displays the incorrect fat-muscle ratio
   The body parameter setting is incorrect, check to make sure you entered the correct gender, height, and age.

5. How do I re-calibrate the scale after moving it or changing the batteries?
   Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate.

6. The scale does not turn on
   Remove the batteries and put them back. Make sure to insert the batteries in the correct direction;

7. The scale only shows weight & BMI.

8. For first-time use, every user needs to use online mode and connect with App for successful measurement. Otherwise, the scale will only weight & BMI.

9. For every time use, need to hold up the handlebar, and confirm the correct grip posture, especially for thumb & four finger contact posture. Otherwise, the scale will only weight & BMI.

10. Keep feet apart, and bear feet onto the scale platform, face to display direction. Otherwise, the scale will only weigh & BMI.

11. Keep standing still for about 20-30s to finish the whole measurement. Otherwise, the scale will only weight & BMI.

FCC Statement

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Battery Advice

Place the scale far away from the children in case of falling or crashing.

Disposal

• The packaging material is recyclable. Please dispose of it in an environmentally friendly manner and take it to a recycling centre.
• Dispose of the device in an environmentally friendly manner. Dispose of it at a recycling centre for used electrical and electronic devices. You can obtain more information from your local authorities.
• The batteries should be removed before disposal of the device and disposed of separately from the device. To protect the environment, non-rechargeable and rechargeable batteries may not be disposed of with normal household waste, but must be taken to suitable collection points. Also, note the relevant statutory regulations governing the disposal of batteries.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>