INFILTRATOR CM-1060 Lightweight Strong And Durable Septic Tank User Guide
- June 8, 2024
- INFILTRATOR
Table of Contents
INFILTRATOR CM-1060 Lightweight Strong And Durable Septic Tank
INTRODUCTION
The Infiltrator CM-1060 is a lightweight, strong and durable septic tank. This
watertight tank design is offered with Infiltrator’s line of custom-fit risers
and heavy-duty lids. Infiltrator compression molded tanks provide a
revolutionary improvement in thermoplastic septic tank design, offering
exceptional long-term strength and watertightness.
Features & Benefits
- Strong compression molded polypropylene construction
- Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
- Integral heavy-duty green lids that interconnect with EZsnap risers and pipe riser solutions
- Structurally reinforced access ports eliminate distortion during installation and pump-outs
- Reinforced structural ribbing and fiberglass bulkheads offer additional strength
- Can be installed with 6” to 48” (152 to 1,219 mm) of cover
- Can be pumped dry during pump-outs
- Suitable for use as a septic tank, pump tank, or rainwater (nonpotable) tank
- No special water filling requirements are necessary
- The tank may be backfilled with suitable native soil. See installation instructions for guidance
PANEL VIEW
TOP VIEW SIDE VIEW
END
VIEW MID-HEIGHT SEAM SECTION
CM-1060 General Specifications and Illustrations
The CM-1060 is a compression molded two-piece midseam thermoplastic tank. The CM-1060 compression molded design allows for a mid-seam joint that has precise dimensions for accepting an engineered EPDM gasket. Infiltrator’s gasket design utilizes technology from the water industry to deliver proven means of maintaining a watertight seal. The two-piece design is permanently fastened using a system of molded-in alignment dowels and locking seam clips. The CM-1060 is assembled and sold through a network of certified Infiltrator distributors.
SCAN
Must be backfilled and installed in accordance with the Infiltrator IM- and CM-Series Septic Tank General Installation Instructions. For shallow ground water conditions reference the Infiltrator IM- and CM-Series Tank Buoyancy Control Guidance. Please visit www.infiltratorwater.com or scan QR code for the latest information.
SPECIFICATION
CM- 1060
Working Capacity| 1,111 gal (4,207 L)
Total Capacity| 1,309 gal (4,956 L)
Airspace| 17.8%
Length| 134.2” (3,409 mm)
Width| 61.7” (1,567 mm)
Length-to-Width Ratio| 2.3 to 1
Height| 54.5” (1,384 mm)
Liquid Level| 44” (1,118 mm)
Invert Drop| 3” (76 mm)
Fiberglass Supports| 2
Compartments| 1 or 2
Maximum Burial Depth| 48” (1,219 mm)
Minimum Burial Depth| 6” (152 mm)
Maximum Pipe Diameter| 4” (102 mm)
Weight| 331 lbs (151 kg)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>