Weeylif 30 Pack Satin Nickel Door Hinges Instructions

Weeylif 30 Pack Satin Nickel Door Hinges

Product Information

Specifications:

• Product: Door Hinges
• Usage: Installation and Repair
• Material: Durable Metal
• Size: Standard
• Color: Silver
• Included Items: Hinge plates, screws

Product Usage Instructions

Installation:

1. Gather the necessary tools: You’ll need a screwdriver, lap ruler, marker pen, a hammer, goggles, and a chisel.
2. Pro tip: Try sliding a block of wood in the space underneath the door for support.
3. Remove the old hinges:
   • Use a screwdriver to unscrew the old hinges from the door and the door frame.
   • Remove the old lockset and hinge pins and take out the door.
   • Remove the hinge plates from the door as well.
4. Determine the location of the hinge on the door and the frame:
   • Hold the door in place and use a pencil to mark where the hinge will be installed on both the door and the frame.
   • Drill pilot holes for the screws using a drill bit that is slightly smaller than the screws. The pilot holes will prevent the wood from splitting when the screws are inserted.
5. Install the hinge on the door:
   • Use the screws provided to attach the hinge to the door.
   • Make sure the hinge is flush with the edge of the door and that it is level.
6. Align the hinge on the frame:
   • Hold the door in place and align the hinge on the frame with the hinge on the door.
   • Use a pencil to mark where the hinge will be installed on the frame.
   • Drill pilot holes for the screws on the frame using a drill bit that is slightly smaller than the screws.
7. Install the hinge on the frame:
   • Use the screws provided to attach the hinge to the frame.
   • Make sure the hinge is flush with the edge of the frame and that it is level.
8. Test the door:
   • Make sure the door opens and closes smoothly.
   • If necessary, adjust the hinge by loosening the screws and repositioning it.

Repair:

1. Remove the door:

   • Take the door off its hinges and lay it flat on a stable
     surface.

2. Remove the hinge pin:

   • Use a hammer and a nail to tap the hinge pin out of the
     hinge.

3. Insert the hinge pin into the repair kit:

   • Place the hinge pin in the hole in the repair kit and screw it
     in place.

4. Reinstall the hinge:

   • Put the hinge back on the door and screw it in place.

Frequently Asked Questions

Q: Can these door hinges be used for both interior and exterior doors?

A: Yes, these door hinges are suitable for both interior and exterior doors.

Q: Are the necessary tools included with the door hinges?

A: No, the necessary tools such as a screwdriver, lap ruler, marker pen, hammer, goggles, and chisel are not included. You will need to provide these tools separately.

Q: Can I use these door hinges on a metal door?

A: These door hinges are primarily designed for wooden doors. It is recommended to consult a professional installer for guidance on using them with metal doors.

Caution!

This product contains small items that may pose a choking hazard if swallowed. Please keep these items away from young children. Looking to install or remove door hinges on your doors? Home DIY mode follow these easy steps to get the job done (If you are unsure of any part of this installation, please contact a professional installer for assistance.): Gather the necessary tools: You’ll need a screwdriver, lap ruler, marker pen, a hammer, goggles and a chisel.

• Start by closing the door to keep it from falling when you remove the pins or screws.
• Have someone help you hold the door in place, especially if you are dealing with heavy wooden doors that can cause damage or injury if they accidentally fall.

Pro tip

Try sliding a block of wood in the space underneath the door for support. Remove the old hinges: Use a screwdriver to unscrew the old hinges from the door and the door frame. Remove the old lockset and hinge pins and take out the door. Remove the hinge plates from the door as well.  Determine the location of the hinge on the door and the frame. Hold the door in place and use a pencil to mark where the hinge will be installed on both the door and the frame. Drill pilot holes for the screws using a drill bit that is slightly smaller than the screws. The pilot holes will prevent the wood from splitting when the screws are inserted. Install the hinge on the door using the screws provided. Make sure the hinge is flush with the edge of the door and that it is level. Hold the door in place and align the hinge on the frame with the hinge on the door. Use a pencil to mark where the hinge will be installed on the frame. Drill pilot holes for the screws on the frame using a drill bit that is slightly smaller than the screws. Install the hinge on the frame using the screws provided. Make sure the hinge is flush with the edge of the frame and that it is level. Test the door to make sure it opens and closes smoothly. If necessary, adjust the by loosening the screws and repositioning the hinge.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>