CARTMAN S.U.V. UPC-2H-39S0-4CIP Ratcheting Jack Stands Owner’s Manual
- June 29, 2024
- CARTMAN
Table of Contents
CARTMAN S.U.V. UPC-2H-39S0-4CIP Ratcheting Jack Stands
Product Information
- Product: 3 Ton SUV Ratcheting Jack Stands
- Brand: Torin Inc.
- Capacity: 3 Ton
- Lifting Range: 13-3/16 to 20-1/4 inches
Operating Instructions
- Insert the ratchet into the frame and bend the bar to prevent detachment.
- Place the jack stands on hard, level ground.
- Adjust the height by pulling up on the ratchet.
- Ensure the load is placed at the center of the saddle for safety.
- Do not remove the lifting means while the jack stands are supporting the vehicle.
- Secure the ratchet by turning the stopper to hold the load securely.
- When storing the jack stands, release the stopper and let the ratchet glide down to the lowest position.
Frequently Asked Questions (FAQ)
Q: What should I do if I notice any damage to the jack stands?
A: Do not use the jack stands if you notice any bending, breaking, or
cracking of components. Safety is paramount, and using damaged equipment can
lead to accidents.
S.U.V.
RATCHETING JACK STANDS
BASE PARA GATO DE TRINQUETE
Distributed by / Distribuido por:
TORIN INC.
Ontario, CA 91761
FOR CUSTOMER SERVICE
PARA EL SERVICIO PARA EL
www.torin-usa.com/support
Made in China / Hecho en China www.torin-usa.com
SPECIFICATIONS
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE
IMPORTANT
Study, Understand and follow all instructions failure to heed this warning may
result in personal injury and/or property damage.
WARNING
Read-Study and understand all warning and operating instructions prior to use.
DO NOT OVERLOAD these jack stands beyond their rated capacity. These jack
stands are designed for use on hard level surfaces only. Center load on saddle
prior to lifting. Use as a matched pair to support one end of a vehicle only.
Stands are not to be used to simultaneously support both ends or one side of a
vehicle. No alterations shall be made to this product. Failure to heed these
warnings may result in damage to jack stands and/or failure resulting in
personal injury or property damage. Inspect before each use. Only attachments
and / or adapters supplied by the manufacturer shall be used.
OPERATING INSTRUCTION
- Be sure to bend the bar after inserting ratchet into frame to prevent ratchet from detaching out of the frame.
- Put the jack stands on hard level ground
- Adjust height by pulling up on ratchet.
- Place load on the center of saddle for safety it is strongly recommended that lifting means not be removed while jack stands are supporting the vehicle.
- Secure ratchet by turning stopper to hold load. Make sure stopper has been securely inserted.
- Release stopper and let ratchet glide down to the lowest position when storing the jack stand.
- Inspect before each use DO NOT USE IF BENT BROKEN OR CRACKED COMPONENT ARE NOTED. Prevent corrosion. Clean as needed and wipe with an oily cloth and keep in dry area when not in use.
Visual inspection shall be performed before each use of the stand by checking abnormal condition, such as cracked welds, leaks and damaged, loose, or missing parts if stand is believed to have been subjected to abnormal load or shock inspection shall be made by authorized repair facility. Equipment that appears damage or worn or operates abnormally shall be removed from service until repair. Repair should be made by authorized repair facility. Annual inspection of the stand is recommended and should be made by the manufacturer’s or supplier’s authorized repair facility to ensure that you stand is optimum condition and that the stand has correct decals and safety labels specified by the manufacturer.
