Zhitong WORLDTAG Anti Lost Device User Manual

Zhitong WORLDTAG Anti Lost Device User Manual

Getting Started

Power On ./ Off: . Press the Anti-lost Device Funct on Button once to turn it on.lt shoulc beep once 😮 Indicate that it ispowerec on
• To power off, hold the same button for at least three seconds You will hear two beeps to indicate that your Anti-lost Device is powered off.
Check For Updates: • To use the Find My app to locate this And-lost DevIce,the latest version of i05•, iPadOS•, or macOS• is recommended.
The Find Items app on Apple Watch• requires the latest version of watchOS’

Add YourAnti-lost Device

Start The App • 0 pol I- Ind P4501″ app on your supported i Phone or Mad.
Connect Your Anti-lost Pirko • Press the function button once to power on your iinti•los-t Device •
Tape, then “Add Other Item’ _ • Once your Arti-lost Device is located. tap ‘Connect”. • Enter a name and choose an emoji for your and tarContinue
• Find My’ will ask for confirmation to add your Anti-lost Dovice to your Apple ID Tap “Agree”
• Tap “Finish” and your Anti—lost Device will be set up and re-adyto be used.

Locate Your Anti-lost Device

Fed Devio When It’s Nearby: • Open Find My” app and select the “Items” tab or open the Find Items app on your Apple Watch
Tap on your Fineln from the list •Tap Play Sound’to make your Anti-lost Device beep.
Tap ‘Stop Sound” to stop the beeps once you find
Find Anti-lost Device’ s Location:
Open Find My app and select the “Items’ tab or open the Find Items app on your Apple Watch_
Tap on your Anti-lost Device from the list •Your Anti-lost Device’s location will appear on the(ap with a time stamp of when the item was located
To navigate to the Anti-lost Device’s location, tap “Directions” to open Applt,liqs1A1

Notifications

Enabling”Notity When Left Behind”: • Open Find My'” app and select the “Items” tab or open the Find Items app on your Apple Watch.
•Tap on your Ant i -lost Device from the list. • Under “Notifications” enable the “Notify When Left Behind”toggle.
You will receive a notification when you leave your Anti-lost Device behind and it’s no longer in range of your device.
Enabling”Notify When Found”: • Under’ Notifications”, enable the ‘Notify When Found” toggle.
When your Anti-lost Device is seen by another Find My netwcekdirnoe.you will receive a notitcaucn of its location,
NoteNotity When Found’can only be activated when your Anti-lost °once is out of range,

When Your Anti-lost Device Lost

Enabling”Lost Mode”: • Open End My”‘ app and select the “Items” tab or open the Fi I1C Item: app an your Apple Watch.
Tap on your Anti-lost Device from trie let • Under “Lost Mode” tap “Enable” . • A screen detailing Lost Mode will pop up, tap ‘Continue • Enter your phone number or email address and tap ‘Next”.
You may enter a message that will be shared with the person that finds your item.
Tap ‘Activate* to enable “Lost Mode- .
Note: When “Lost Mode” is. enabled, “Notify When Found’ isautornatically enabled.
Nate: When•Last Made” is enabled your Anti-lost Device is locked and cannot be paired to a new device.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>