RUVENTI Air Pro Luxe 2 in 1 Ventilator User Manual
- June 16, 2024
- RUVENTI
Table of Contents
AIR PRO
Product Manual
Assemble
Place the fan in the right place on the foot piece. Rotate the product then clockwise until the fan stands firmly on the foot piece.
Remote Control
Cool & Hot
Cool Mode
- Press the On/Off button and you are directly in the ‘cool’ mode.
- Press + or – to adjust the wind speed.
Hot Mode
- Press the Cool/Hot button to access the hot mode.
- Then choose between H-M – L for your preferred wind speed. (H=High | M=Middle | L=Low)
Touchscreen Control
IMPORTANT SAFETY INSTRUCTIONS
Before using this product please read all the inctructions and cautionary
markings in this manual and on the product.
TO REDUCE THE RISK OF ACCIDENTS:
-
This fan is hot when for a short period after use. To avoid burns, do not let bare skin touch hot surfaces.
-
When moving the fan, hold it by the base, not the air loop amplifier.
-
Don’t leave the fan unattended near children when it is blowing hot air.
Make sure they know that the fan is hot and that they are not allowed to play with it. -
Only let people use this fan who are instructed by this manual.
-
The foot piece must be fitted securely before operating. Do not use it without the base.
-
The fan is only suitable for dry locations. Don’t use it in bathrooms, laundry areas or any other similar areas.
-
Do not handle any part of the plug or fan with wet hands.
-
Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
-
Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by the company or other qualified persons in order to avoid a hazard.
-
To disconnect the fan, turn the controls off, then remove the plug from the socket.
-
Do not use if the fan malfunctions. Contact the company or another qualified person.
-
In order to avoid overheating and fire hazard, do not cover the fan.
IMPORTANT SAFETY FEATURES
For your safety this fan is fitted with automatic cut-out switches that
operate if the fan tips over or overheats. If the switch operates, unplug the
fan and allow it to cool before you use it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>