IxDregan 55.1 Bed Rail for Toddlers 2023 SafePlus Toddler Bed Rail Instruction Manual

KIDS BED RAILS

Special Note
The instructions used in this manual are intended to illustrate the operation method and structure of the product. When there is a small difference between the physical object and the figure, the actual product shall prevail. In order to improve the quality of the product, we may change the structure and appearance of the product without notice. Thanks!

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE

To reduce the risk of injury to persons:

1. Close supervision is necessary when this product is used by or near children, or disabled persons, if applicable.
2. Please keep children out of the assembly area before assembly.
3. Only for babies who are using a crib, do not use this bed guard rail instead of a crib.
4. Do not use on baby cots, bunk beds, water beds and beds with air mattresses.

WARNING

SUFFOCATION AND STRANGULATION HAZARD

Gaps in and around bed rails have entrapped young Chandran and killed infants.

• NEVER use with children younger than 2 years old.
• Use ONLY with older children who can get in and out of adult bed without help.
• NEVER use in place of crib.NEVER use unless bed rail is tight against mattress,without gaps, and at least 9 in. From headboard and footboard. Do not fill gaps with pillows, blankets, or other items that can suffocate children.
• NEVER use on toddler bed,bunk bed. water bedsore bed with inflatable mattress. Use ONLY on adult bed.

WARNING

This bed guardrail is designed to reduce the risk of a baby falling from the bed, which cannot completely prevent the possibility of the baby falling.
Please do not rely on this series of products. Recommended for use under adult supervision.

WARNING
Do not use this product as a support.Do not shake,lean or climb on the product. Children under the age of 8, near the product, should be supervised by a competent adult at all times.
This product is NOT intended for commercial use and will void the warranty.
Discontinue use if damaged, broken, or if parts are missing.

WARNING
This product needs to be assembled by an adult!
WARRANTY

ONE YEAR BED RAILS LIMITED WARRANTY
WHAT IS COVERED
We warrant the kid bed rail to be free of manufacturing defects to the original purchaser for one years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not covers warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.

CLEANING INSTRUCTIONS

MAINTENANCE PROCEDURE

• Check the tightness regularly and tighten it according to your necessary.
• Always check all plastic parts and the fabric net to avoid cracks or abrasion, please fix it if necessary.
• Check the both ends and all connection points.
• Check the elasticity of cotton fabric whether loose or not, and clean it regularly.

PACKAGE INCLUDED

PRODUCT INSTALLATION

Note: The cotton sleeve on the support bar is a product part. Do not throw it away! It must be used with the product to protect the baby from bumping on the metal rod and being injured.

Step1. Connect the Horizontal Support Bar (covered with the pearl wool protection sleeve) first.
Connect the left and right Upper Horizontal Support Bar together until the hole is just stuck and become a long straight top bar.
Step 2. Unfold the mesh wall. Insert the Horizontal Support Bar into the gaps between the upper and bottom sides of the mesh wall.

Step3. Distinguish left or right vertical support bar.
Step4. Insert the support bar(with mesh wall)cloth cover into the left and right vertical support bars, securing to upper and bottom bars. Press the marble button above the connecting tube, until the marble button fits in the groove.

Step 5 Organize the cloth cover and adjust the distance between the two ends of the cloth cover to desired length. Pull the zipper on both ends closed.
Step 6 Insert left and right vertical support bars onto left and right adjustable feet respectively.

Step 7 Remove the mattress, put the bed rail guard on the bed board, and fix the adjustable Stander with Shaped Drives.
Step 8 Remove the mattress, put the bed rail guard on the bed board, and adjust the high of the adjustable Stander according to the mattress.

Step 9 Pull outward horizontally to unlock, then you can adjust the upper horizontal support bar by yourself.

Step 10 If several removable bed rails are fitted together, there may possibly be holes between the adjacent bed rails. Choose the two side rails and add an L-shaped joint block to secure them. If the swing of the protective structure is too wide, fix it with screws (25 mm) to reinforce it.

Applicable Bed Types:

Note on Bed Type: This product is not suitable for round beds.
Note on Mattress: This product is not suitable for round mattresses.
This product is not suitable for mattresses that extend beyond the edge of the bed by more than 1cm.
How to Choose: Select based on the size of the mattress

How to Use the Securing Strap:

Connect the strap to the brackets at the bottom of the bed rail and wrap it tightly.

Lift the mattress, place the rail and the strap together underneath, pull the strap tight, and then lay the mattress back down.

Metal frame beds cannot be fixed with screws. Instead, use a triangular plate and cable ties for a very stable setup. Both the triangular plate and cable ties will need to be purchased separately.

ADDITIONAL-ROW FRAME BED

When using the row frame bed to install, it is necessary to adjust the adjustable iron sheet on the adjustable stander according to the position of the bed board, then use a sturdy rope to tie the adjustable stander to the bed board to achieve a stable effect.

ADDITIONAL-MATTRESS

Note:

1. This product is suitable for mattresses with a thickness of 4-12inch.
2. The horizontal support bar on the inside must be pressed firmly against the edge of the mattress.

ADDITIONAL-Single-sided installation

Before you throw away the box, please check that you have all the parts.
If you encounter any problems after purchase, please do not hesitate to contact us. We will provide you with satisfactory service until the problem have been resolved.
Ixdregan@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>