BVRONA CXL001-C Bluetooth Meat Thermometer User Manual

June 16, 2024
BVRONA

BVRONA CXL001-C Bluetooth Meat Thermometer User Manual

BVRONA CXL001-C Bluetooth Meat Thermometer User Manual

Warning

  1. Make sure the probe is inserted into meat, exceeding the safety line. Do not put the probe in the oven alone because the probe will be damaged by high temperature.
    BVRONA CXL001-C Bluetooth Meat Thermometer - Make sure the probe is
inserted

  2. The charging base should be better placed within 3 meters of the probe, otherwise the Bluetooth signal may not be Charcoal oven Charcoal oven received.
    BVRONA CXL001-C Bluetooth Meat Thermometer - he charging base
should

  3. Do not use the probe in the microwave oven.
    BVRONA CXL001-C Bluetooth Meat Thermometer - Do not use the
probe

  4. Do not wrap the probe in a tinfoil.

  5. Probe will be very hot during or after cooking.DO NOT touch it with bare hands.
    BVRONA CXL001-C Bluetooth Meat Thermometer - Probe will be very hot
during

  6. Don’t burn the black part with fire, it can only withstand 300°C (572°F), or it will be damaged.
    BVRONA CXL001-C Bluetooth Meat Thermometer - Don't burn the black part
with

Download the APP

Search “Aicooking” in App Store or Google play or scan the following QR code.

APP DOWNLOAD

IOS10.0 and above,
Android5.0 and above.

CXL001-C

NOTE:

  • The APP does not have a cloud serve and will not automatically collect customer private information.
  • Please allow location access and turn on Bluetooth while installing and using the APP.

Using Your Smart Meat thermemoter

BVRONA CXL001-C Bluetooth Meat Thermometer - Using Your Smart
Meat

  1. Toggle the switch on the base to the ON position.
  2. Take out the probe from the base and insert it into meat.
  3. Place meat in an oven, air fryer, or frying pan.
  4. Turn on Bluetooth on your phone, launch the Ai cooking APP, and Select PE-TM001.
  5. Set and monitor the temperature in the APP.
  6. To disconnect, charge the probe, close the APP or turn off Bluetooth on your phone.

Note: After use, clean and put the probe back into the base. Toggle the switch to the OFF position for charging.

FAQ

Q1:Can’t find the probe on the Bluetooth list?
A: 1) Make sure Bluetooth is enabled on the iPhone, or Bluetooth and GPS are enabled on the Android phone.
2) Ensure that the charging base is with 3 meters of the probe.
Q2:Can the black part of the probe be roasted with fire?
A:No,fire will melt the black part of the probe.
Q3: Do I still need to reset the menu when the Bluetooth signal has lost its connection?
A: No, APP will update the data automatically, as long as you receive the drop alert and connect APP in time.

Warranty

Thanks for choosing CXL001-C Wireless Smart Meat Thermometer.
This product is covered with 12 months warranty from the date of its original purchase.

Service

If you need any further information or assistance, please feel free to contact us directly, we will reply you at the fist time and do our best to solve it.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not approved by the party for compliance, could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteen that interference will not occur in a particular installation. If this equipment does cause harmful  interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

CE,Fc, recycle,disposal icon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals