SHISUO S51 Wireless Microphone User Manual
- June 16, 2024
- SHISUO
Table of Contents
SHISUO S51 Wireless Microphone User Manual
Introduction
Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
This product consists of three parts: charging box, microphone transmitting end and receiving end. (as shown in the figure below, some models have no charging box, subject to the real object)
ID Diagram
How to use
Step 1: Connect the receiver to phone with port.
Note: oppo/vivo/iqoo/realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)
Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.
Step 3: The indicator light of receiver keeps always on, then open the phone camera, live App or other Apps, and then to use the microphone to receive sound
Special Note: For the use of port: there is no battery in receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through port.
About UI
Microphone Transmitter
Receiver
Packing List
Content of packing
- Microphone transmitter
- Lightning receiver
- Charging box
- Charging cable
- User manual
Warning: The quasi-input voltage of the charging port is 4.8-5.3V
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and operated with minimum distance 0cm between
the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>