SHISUO S20 Professional Sound Card Audio System User Manual

S20 Professional Sound Card Audio System
User Manual

Function Introduction

1. Power ON/OFF
   Long press 3 seconds to turn on/off the device. The lights will be on when turn on the device, and the l i g h t s will be off when turn off the device.

2. Bass
   Adjust the bass of microphone. Turn it clockwise to increase the bass, and turn it counterclockwise to decrease the bass.

3. Treble
   Adjust the t r e b l e of microphone. Turn it clockwise to increase the treble, and turn it counterclockwise to decrease the treble.

4. MIC Volume
   Adjust the volume of microphone. Turn it clockwise to increase the volume, and turn it counterclockwise to decrease the volume.

5. Accompaniment mode
   Press ◄ to play previous song, press to play next song, press to play / pause the music.

6. Battery Level Indicator
   When charging the device, the led l i g h t s will be on one by one.
   The battery indicator has four bars, and each bar represents 25% battery level.

7. ECHO Vol.
   Adjust the ECHO volume of microphone. Turn it clockwise to increase the ECHO volume, and turn it counterclockwise to decrease the ECHO volume.

8. Accompaniment Vol.
   Adjust the ECHO volume of microphone. Turn it clockwise to increase the ECHO volume, and turn it counterclockwise to decrease the ECHO volume.

9. Earphone / Audio Vol.
   Adjust the volume of earphone and audio. Turn it clockwise to increase the volume of earphone and audio, and turn it counterclockwise to decrease the volume of earphone and audio .

10. Bluetooth
    Press to turn on/off the function. When turn on the function, the light is on, and when turn off the function, the light is off.
    You can use your mobile phone to connect the Bluetooth “S20” when the function is turned on

11. Eight Sound Effects
    Press to play the sound effects. Totally eight different kinds of sound effects.

12. Electronic Sound
    Press to turn on the function. Each press will have a different pitch.

13. Sing
    Press to turn on the KTV mode. You can adjust the ECHO volume under this mode.

14. Chat
    Press to turn on the chatting mode. This function is mainly used for webcasting.

15. Voice change
    Press to turn on the function. Each press will have different voice effects. There are totally f i v e voice effects: Monster voice, Female voice, Male voice, Child voice and Original voice.

16. Light on/off
    Press to turn on / off the light effects around the speaker and diaphragm.

17. Dodge
    Press to turn on the function. When the function is on, the background music will be lowered automatically when people speak via microphones, and the background music will e normal automatically i f no people speak via microphone.

18. Mute
    Short press to turn on the function, the speaker and earphone will both be in mute status. Long press 3 seconds to turn off the speakers, but the earphone can work properly.

19. Purge Original
    Press to turn on / off the function. When turn on the function, there will be no original singing in the music and only accompaniment music.

20. Lighting
    Press to choose the lighting effects around the speaker and diaphragm.

21.  Internal Play
    Press to turn on / off the function. When turn on the function, the computer will play music i f you use computer for webcasting.

22. Denoise 2
    Press to turn on the function. This function is mainly used in the noisy places.

23. Denoise 1
    Press to turn on the function. This function is mainly used in the quiet places.

Connecting Points

1. Charging/OTG
   a, Charging: Charge the d e v i c e with Type-C cable, pls do not use high voltage charger to avoid damaging the device.
   b, OTG: Use OTG cable to connect for digital webcasting, or use Type-C cable to connect for computer webcasting

2. Condenser Microphone
   Connect 5V condenser microphone with 3.5mm connector

3. Headset
   Connect headset or earphone with 3.5mm connector

4. Earphone
   Connect earphone with 3.5mm connector

5. AUX
   Connect external sound source with 3.5mm connector

6. Phone
   Connect the mobile phone for webcasting, recording and Karaoke

7. MicroSD / TF
   Insert MicroSD / TF for music

8. Dynamic Microphone
   Connect Dynamic microphone with 3.5mm connector

Connecting Diagram

1. Connect Point Diagram

2. Webcasting Connection Diagram
   

3. Home KTV Connection Diagram

4. Setting Diagram for Computer accompaniment and Webcasting Connecting the device to computer and the computer can identify the device:
   (1) Connect the device to computer by TYPE-C cable, you can see the USB icon on the bottom right corner of the computer, then click the USB icon with right mouse button to choose ” play device”.
   If the speaker i s showing “S20” as default device, the sound card driver i s installed successfully and identified by the computer.
   (2) All the computers or other devices that can support OTG and standard USB protocol can be connected to the sound card

5. Bluetooth Connection Diagram

(1)Activate Mobilephone bluetooth as image(1)
(2)The mobilephone will automatically search available devices asimage (2)
(3) Search for Bluetooth “S20” and click to pair. It takes about 10 seconds to connect successfully.
As shown in the figure, the sound card will prompt “Bluetooth is connected”. At this time, you can select mobile music as accompaniment music;

Product Parameters

1. Battery type: Li-on Battery
2. Battery Capacity: 4000mAh1
3. Horn*2: 5wW+5W
4. Bluetooth: 5.0
5. Operation time:3~5 hours (When audio is on10~15 hours (When audio i s off
6. Charging: DC 5V/2A
7. Horn power: 16W

Freqiently Asked Questions

The power LED
is not on| The sound card does not have
sufficient power| Charge the sound card and try it again
No sound from
Microphone| 1,the power of microphone is not on.
2,The volume of sound card is
not turned on| 1,Turn on the microphone power.
2,Turn on the volume of sound card.
No sound from
speakers| The audio is not on| Long press the button “Mute” to
turn on/off the audio
No sound from
earphone| 1,The power if off
2,The volume of earphone is off| 1,Turn on the power
2,Adjust the volume of earphone
The sound card has no reverb| 1,The ECHO volume is off
2,Mobilephone for webcasting
is not connected| 1,Adjust the ECHO volume
2,Well connect the mobilephone
for webcasting
No accompaniment
during webcasting| The mobilephone for webcasting
and accompaniment is
not well connected| Check the mobilephone and make
sure they are well connected.
Lower or no accompan
invent volume| 1,The volume of mobilephone for accompaniment is lower
2,The music itself has lower volume| 1,Adjust the volume of mobilephone
2,Download the music with
normal volume
There is voice but no  ccompaniment in the webcast room| Press the buttons of special effects, check if you can hear the special effects in the webcast room. If
cannot hear the special effects, then the mobilephone for webcasting is not well connected| Turn on the power Adjust the audio volume.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>