CiT 299991 LED Halley Instruction Manual

June 16, 2024
cit

**Halley LED

299991, #299992, #299993, #299994

Instructions for use
**

Operating and Safety Instructions for Electric Fly Killers Halley LED

General instructions

The present operating and safety instructions are for the user. Please read the instructions carefully and thoroughly and take heed of the regulations before putting the device into operation!

Safety instructions

2.1. Use
In the event of improper use of and tampering with the device, the warranty and liability of the manufacturer will be rendered null and void. The voltage given on the name plate must correspond to the voltage of the power source.
2.2. Check all components before each implementation
Damaged parts are only to be repaired by a specialist or by the manufacturer. Repairs done improperly can result in accidents for the operator. Use only original parts for any eventual repairs.
2.3. Safety
Before cleaning, rearranging or servicing the device always first pull the plug from the power source!
2.4. Keep unauthorized persons away
Make sure that unauthorized persons, children in particular, do not have access to the fly killer.
DANGER: High Voltage
2.5. Fire hazard!

Do not operate the electric fly killer in barns or similar places and do not set the device up in the vicinity of combustible materials and in places where the presence of combustible vapors, explosive dust or ignitable fluids is likely.
2.6. Guard the connection lines
Do not use the connection line to pull the plug from the power source or to carry the device. Take precautions that the connection lines are not exposed to heat, oil or sharp edges. Damaged connection lines can cause fires, short- circuiting and electric shocks.
2.7. Take the ambient influences into account
Guard your device against all liquids and moisture. Never submerge in water or clean with a water jet. Otherwise there will be a danger of fire or electric shock.
2.8. Regular servicing
Always store your device securely, out of reach of children, and dry. Heed all possible maintenance regulations. Check the device at regular intervals. Use only original spare parts and accessories.
2.9. National and international regulations
National and international safety, health and labor regulations are to be heeded.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience in a safe way and understand the hazards involved.
  • Children may not play with the device.
  • Cleaning and user maintenance may not be performed by children without supervision.
  • The instructions for appliances for indoor use only shall state that they are not suitable for use in barns, stables and similar locations.
  • The appliance is to be kept out of reach of children.
  • The appliance is not to be used in locations where flammable vapour or explosive dust is likely to exist.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons   in order to avoid a hazard.

Operating instructions

3.1. Function
By means of ultraviolet light, flying insects are lured into the effective range of the device. Attached in front of the light tube is a screen charged with high voltage. Upon contact with this high-tension screen the insects are quickly and hygienically killed. The fallen insects are collected in a drip pan which only has to be removed from the housing for emptying.
3.2. Unpacking
Open the packing carefully and remove all the parts. Avoid scratching the device on sharp or pointed objects. Make sure that none of the parts, in particular the chain and the drip pan, is left in the packing. Keep the operating instructions in a safe place!
3.3. Assembly/erection
The device can be

  • put in place or
  • suspended on the chain which is included.

Relevant for both variants: Make sure the device is not placed too close to sources of ignition, i.e. easily combustible objects.
The device is not made for outdoor use!

3.3.1. The device is put in place
Make sure that the underground is even and dry and that no easily ignitable objects are in the immediate vicinity of the device. The site of installation should likewise be beyond the reach of children. For smooth functioning it is important that the device is set up so that insects can fly unimpeded toward the light from both sides. Other sources of light and drafts have a negative affect on the effectiveness of the UV light.
3.3.2. The device is suspended
Choose the site with care. Other sources of light and drafts have a negative affect on the effectiveness of the UV light. Make sure that the chains are firmly attached to the device. Install the insect killer between 1.5 und 3.0 m above the ground.
Caution: Do not hang outdoors! The device is for indoor use only!
3.4. Servicing/Cleaning
Switch the device off and pull the power plug before cleaning. Empty the drip tray regularly – at least once a week. When doing this, pull it carefully out of the housing. The pan can then be rinsed with water. Let it dry before reinserting. The protective screen, the high-voltage screen and the UV lamps can be cleaned with a dry cloth or with a brush.

Specifications

Mains voltage: 220 – 240 Volt
Frequency: 50 Hz
Power: 22 Watt 299991, 299992

26 Watt 299993, 299994
High voltage:| 4.000 Volt
Effective range:| max. 150 m2 299991, 299992
max. 250 m² 299993, 299994

** CE-conformity declaration
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements and other relevant stipulations and regulations. The CE-/UCKA-mark confirms compliance with the Directives of the European Union or the releant UK legislation.
Electrical waste**
It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult the relevant regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on  the disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any possible harmful impacts on humans and the environment.

cit® a brand of:
Albert Kerbl GmbH Felizenzell 9
84428 Buchbach, Germany
www.kerbl.com info@kerbl.comCiT 299991 LED Halley - Logo
` 299991_299994=BA_Halley_LED_148x210_1123

Documents / Resources

| CiT 299991 LED Halley [pdf] Instruction Manual
299991, 299992, 299993, 299994, 299991 LED Halley, LED Halley, Halley
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals