ACKURETTA SOL Dental 3D Printer User Guide
- June 4, 2024
- ACKURETTA
Table of Contents
SOL
Quick Start Guide
Package Contents
Product Specifications
| 3D Print Technology | Monochrome LCD Panel |
|---|---|
| Machine Size | 271.3 mm (W) x 292 mm (L) x 416.8 mm (H) |
| Weight | 15 kg approx. |
| Print Size | 128 x 80 x 140 mm |
| XY Resolution | 49 μm |
| Slice Thickness | 30 – 150μm |
| Resin Wavelength | 385 – 405 nm |
| Power Supply | 110 – 240V AC, 50-60Hz |
Setup Guide
Software
Download and install the Alpha 3D software from the Ackuretta website:
https://ackuretta.com/sol/
Unboxing
- Remove the cables, hex key, two boxes, and packaging from the top and put them in a safe place.
- Lift your printer out by the handles.
- Secure your printer by the base to remove it from its internal packaging.
Side Boxes
There are four small boxes in the package with the following contents:
VAT: 2x vats (one vat in place on the printer and another with the
accessories)
CABLE and TOOLS:1x ethernet cable, 1x power cable and1x hex key (Allen wrench)
Environment
Operate your SOL in a temperature-controlled room, between 18°- 25° C (64°-
77° F).
Ackuretta also recommends using UV-filtered LED lights in your workspace for
both printing and cleaning.
Warning
Do not allow any resin or residue to come into contact with the hood on your
printer because 3D printing resins have a corrosive effect on acrylic.
Setting Up Wi-Fi
You can easily operate your SOL from your computer. You can upload prints
directly, and track print status. To set up your Wi-Fi connection:
- Go to Network. The Wi-Fi tab is selected by default.
- Press the Choose a Network button, select a network, and key in the password. The IP address appears on the screen.
- Make a note of the printer’s IP Address.
- Select your Wi-Fi network.
Updating Firmware
Ackuretta is always adding new resins and improving functionality. If you are
connected to the Internet, check for the latest firmware:
- Go to Settings
- Select Update
- Press Update firmware online
Print
You can print either over Wi-Fi or from your USB device.
- Go to Print
- Select USB or Computer, depending on the location of your file
- Choose your IBF file
- Change your material setting, if necessary
- Press Print
Documentation and Support
For the full set of SOL documentation, go to: https://ackuretta.com/sol/
For community feedback, see our Ackuretta’s User Group on Facebook: https://www.facebook.com/groups/2164055477166718/
https://www.facebook.com/groups/2164055477166718/
References
- Ackuretta | Same-day Dental 3D Printing Solutions
- SOL Dental 3D Printer | Perfect Same-Day Dentistry Solution
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>