ECblue L-BAL-E331-GB ZAupdate Software User Guide

ECblue L-BAL-E331-GB ZAupdate Software

Product Information

Specifications:

• Product Name: ZAupdate
• Function: Update software for ECblue motors and fans
• Language: English
• Part Number: ZAupdate
• Manual: L-BAL-E331-GB 2023/41 Index 001

Product Overview:
The ZAupdate is an update software designed specifically for compatible ECblue motors and fans. It is intended to be used in conjunction with the corresponding hardware equipment. Please note that any other use beyond this scope is not allowed unless contractually agreed. The software allows for updating the firmware of the ECblue motors and fans to ensure optimal performance and functionality.

Scope of Application:
The ZAupdate software is specifically designed for use with ECblue motors and fans. It is not compatible with products from manufacturers other than ZIEHL- ABEGG.

Safety Instructions:

Intended Use:
The ZAupdate software is intended to be used for updating the firmware of ECblue motors and fans. It should only be used by individuals who have the appropriate qualifications and skills for their job.

Product Safety:
The software is considered reliable when used correctly and by the provided instructions. However, improper configuration or misuse of the software can lead to device defects and further damage. It is important to ensure correct connections and use devices suitable for the software.

Requirements Placed on the Personnel:
Individuals entrusted with the use of the software must possess the necessary qualifications and skills for the job. They should also have knowledge of safety regulations, EU directives, accident prevention rules, and relevant national, regional, and in-house regulations.

Product Usage Instructions

Step 1: Download the ZAupdate Software
To begin using the ZAupdate software, you need to download it onto your PC. Visit the ZIEHL-ABEGG website or use the setup provided by ZIEHL-ABEGG to install the software.

Step 2: Perform the Update
Once the software is installed on your PC, follow these steps to perform the update:

1. Ensure that the ECblue motors and fans are connected to your PC via the appropriate hardware equipment.
2. Launch the ZAupdate software on your PC.
3. Follow the on-screen instructions provided by the software to initiate and complete the update process.
4. Wait for the update to finish successfully.

FAQ:

• Q: Can I use the ZAupdate software with motors and fans from other manufacturers?
  A: No, the ZAupdate software is specifically designed for use with ECblue motors and fans manufactured by ZIEHL-ABEGG. It is not compatible with products from other manufacturers.

General notes

1. Purpose of the document
   Before installation and start-up, read this documentation carefully to ensure correct use! Please note that this document is only related to the software and under no circumstances applies to the devices or the complete installation. The document is intended to ensure safe use of the software described. It contains safety instructions that must be complied with as well as information that is required to ensure fault-free operation of the software. All persons performing activities with the software must be able to view the document at any time. Store the document for later use and pass it on to every subsequent owner, user or end customer.

2. Target group
   This document addresses persons entrusted with installation and operation of software and who have the corresponding qualifications and skills for their job.

3. Exclusion of liability
   Concurrence between the contents of these document and the described software has been examined. It is still possible that non-compliances exist. No guarantee is assumed for complete conformity.- To allow for future developments given are subject to alteration.We do not accept any liability for possible errors or omissions in the information contained in data, illustrations or drawings provided. ZIEHL-ABEGG SE is not liable for damage due to misuse, incorrect or improper use.

4. Copyright
   This document contains information protected by copyright that may only be used in conjunction with ZIEHL-ABEGG devices and services. By using and accepting this documentation, this is recognised by the user. Violations will be liable to compensation for damages. All rights reserved, including those that arise through patent issue or registration on a utility model.

Safety instructions

1. Intended use
   Proper use for the intended purpose is only satisfied when the software is used according to this documentation and compatible devices are used. It must be checked by the user. Any other use above and beyond this is considered not for the intended purpose unless agreed otherwise by contract. Damages resulting from such unauthorised uses will not be the liability of the manufacturer. The user will assume sole liability. Use for the intended purpose includes reading this documentation and reading the documentation of devices with which this software is used. Instructions contained therein, especially safety instructions, must be observed. Not the manufacturer, rather the operator of the system is liable for any personal harm or material damage arising from non-intended use.

2. Product safety
   The software conforms to the state of the art at the time of delivery and is fundamentally considered to be reliable. However, their incorrect configuration or improper use can lead to a defect in the device and cause further damage! This also applies for an incorrect connection or connection of devices unsuitable for the software.

3. Requirements placed on the personnel
   Persons entrusted with the software use must have the corresponding qualifcations and skills for this job. In addition, they must be knowledgeable about the safety regulations, EU directives, rules for the prevention of accidents and the corresponding national as well as regional and in-house regulations.

Product overview

Scope of application
ZAupdate is an update software for compatible ECblue motors and fans in conjunction with the corresponding hardware equipment. Any other use above and beyond this is not allowed, unless contractually agreed. Products from manufacturers other than ZIEHL-ABEGG are fundamentally excluded from use in conjunction with the software.
Possible update versions:

• In conjunction with the Interface for ECblue hardware adapter designed by ZIEHL-ABEGG.
• In conjunction with a conventional USB-MODBUS converter.

Before using the software, it must be installed on a PC using the setup provided by ZIEHL-ABEGG.

Download the ZAupdate software
The ZAupdate is available as a free download from our web site. https://www .ziehl-abegg.com/digitale-loesungen/software/zaupdate

Perform the update

1. After successfully installing ZAupdate on your PC, the software will display the following window when launched.
   Now enter the Client ID for ZAupdate provided by your ZIEHL-ABEGG contact. If you do not have a direct contact at ZIEHL-ABEGG, please send a brief explanation of your issue to the following e-mail address: fan-service@ZIEHL- abegg.de

2. The next step is to display the available updates with the relevant service number. Select the update to be performed here and confirm with the Update button.

3. After selecting the update, you will be prompted to specify the connection type.
   Available options:

   • Interface for ECblue: Hardware adapter designed by ZIEHL-ABEGG for ZIEHL-ABEGG ECblue motors and fans
   • Modbus RTU: Conventional USB-MODBUS converter

4. For an update using the Interface for ECblue no further entries are required. Skip the next two steps 5 and 6 using the Next button and continue with step 7 Start Update.

5. For an update using Modbus, you can use the Multi Update function to directly update multiple devices with different Modbus addresses. If you want to do this, enter the start and end address of the Modbus devices.

6. If you only want to update one device using Modbus, set the Multi Update function to Off and enter your Modbus address. Then confirm your entries using the Next button.

7. In the next window, you can start the update by clicking on the Start Update button. The Auto scroll function ensures better comprehensibility of the update process.

8. During the update process, the current status is displayed in the window.

9. After a successful update, the program displays a window containing the message Update finished successfully.

Enclosure

Software documentation

Manufacturer reference
Our products are manufactured by the relevant international regulations. If you have any questions concerning the use of our products or plan special uses, please contact:

ZIEHL-ABEGG SE
Heinz-Ziehl-Straße
74653 Künzelsau
phone: +49 (0) 7940 16-0
info@ziehl-abegg.de
http://www.ziehl-abegg.com

Service note
If you have any technical questions while commissioning or regarding malfunctions, please contact our technical support for control systems – ventilation technology.
phone: +49 (0) 7940 16-800
Email: fan-controls-service@ziehl-abegg.de
Our worldwide contacts are available in our subsidiaries for deliveries outside of Germany, see www.ziehl-abegg.com.

References

• ZIEHL-ABEGG | Ventilatoren & Motoren - leise & energiesparend
• Software-Update für EC-Motoren und Ventilatoren

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>