atom AT9090 Tri 8W Low Profiloe LED Downlight Installation Guide
- June 16, 2024
- ATOM
Table of Contents
atom AT9090 Tri 8W Low Profiloe LED Downlight
Product Information
Specifications
- Size: 30mm
- Voltage: 230V~ 50Hz
- Power Consumption: 8W
- Light colour options: Warm white, Cool white, Daylight
- Colour temperature: 3000K, 4000K, 5700K
- Flush Lumen output: Recessed – 810lm, 900lm, 880lm; Colour Rendering Index >80; Beam Angle Dimmable – Yes*
- Warranty: 3 Years
- Working Temperature: IP54 (front face), IP20 (behind ceiling)
- IC Rating Electrical classification: IC-4 IC-F (NZ) Class II
- Wiring: Flex and Plug, 1A
Product Usage Instructions
Installation
- Isolate mains power.
- Cut a hole in the desired position. The size of the cutout depends on the extension plate diameter.
Code and Description
- AT9090/F/WH/TRI – Product Code: 16597 – Finish: White – Style: Flush
- AT9090/WH/TRI – Product Code: 16598 – Finish: White – Style: Recessed
Dimmable Functionality
This product is dimmable. Please refer to the user manual for specific
instructions on how to dim the light.
LED Driver
- Code: AT9090/DRIVER
- Description: 8W LED Driver Constant Current Dimmable 5665Vdc 110mA
FAQ
Q: What is the warranty period for this product?
A: The warranty period for this product is 3 years.
Q: What is the working temperature range of this product?
A: The working temperature range is IP54 (front face) and IP20 (behind
ceiling).
Q: Is the product suitable for use in combustible building structures?
A: The product has the following suitability ratings for combustible
building structure members: HCB: 0mm, MIC: 0mm, SCB: 0mm, SCI: 0mm, SCG: 50mm.
DIMENSION
8W Low profile LED Downlight with Dimmable Driver – TRI-CCT
Product Specification
Product Range
SAFETY INFORMATION
- Luminaires must be installed and fitted by a qualified electrician ensuring the installation complies to the current wiring regulations.
- The LED’s in this downlight CANNOT BE REPLACED.
- Ensure all electrical connections are secure and that there are no loose strands.
- Do not install this product on damp or newly plastered-ceilings.
- Always ensure there is adequate ventilation around the driver at all times.
Installation
Read the instructions and check you have all the tools and accessories to complete the installation correctly. This product is dimmable with selected leading and trailing edge dimmers. It is recommended that you only use the endorsed dimmer brands. Please consult your lighting provider before installation.
-
A. Isolate the main power supply before commencing installation.
B. Cut the hole in the desired position. -
Feed mains cable through cut-out and plug into mains supply.
-
Set desired LED colour temperature
-
Fold spring clips and push into cut-out.
-
Fit downlight into ceiling cut-out.
-
Ensure correct lighting installation, and switch power supply on.
This product may contain substances that can be hazardous to the environment if not disposed of properly. Electrical and electronic equipment should never be disposed of with general household waste but must be separated of it’s correct treatment and recovery. Where possible recycle your packaging. Please keep these instructions safe for future reference.
Risk of Fire
CAN BE COVERED AND ABUTTED
- HCB = Minimum distance between the top of the recessed luminaire and any building element above it.
- MIC = Minimum distance between the top of the recessed luminaire and the building insulation above it.
- SCB = Minimum distance between the side of the recessed luminaire and any building element.
- SCI = Minimum distance between the recessed luminaire and any building insulation.
- SCG = Side clearance to auxiliary equipment [control gear (CG)]
Risk of Fire – Required clearance from structural members and building elements.
- HCB: 0mm
- MIC: 0mm
- SCB: 0mm
- SCI: 0mm
- SCG: 50mm
Warning: Risk of overheating or fire if the clearance distances are compromised.
Driver models supplied with the AT9090
Warranty
Atom products are distributed in Australia by Atom Pty Ltd (Atom). The Australian Consumer Law as well as other Australian laws guarantee certain conditions, warranties and undertakings, and give you other legal rights, with the quality and fitness for Atom products sold in Australia. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law. Nothing in this Warranty purports to modify or exclude the conditions, warranties undertakings, and other legal rights, under the Australian Competition and Consumer Act and other Australian laws. Atom products are warranted in Australia for a period specified on packaging from the date of delivery of the product, provided that the products are properly stored, installed, used and maintained per the instructions contained within their manual Products that have been altered in any way or used other than following their instructions are not covered by this Warranty.
This Warranty is not transferable and is valid only in the hands of the purchaser of the product. The warranty does not cover Atom products other than those purchased from Atom. Proof of purchase must be provided to Atom with any warranty claim. Atom recommends that the purchaser attach their proof of purchase to their product manual. If you wish to claim under this Warranty, you must, at your own expense, return the product or that part of the product which you believe is defective, and proof of original purchase, your name, address and telephone number and a certificate installation or other document required by the law for the installation of electrical products in the place in which the product was installed, to Atom at the address above within the warranty period from the date of purchase.
Please note that the Warranty does not cover removal or re-installation of the product or that part of the product that you believe is defective. Atom’s total liability under this Warranty is limited to the cost of repair or replacement of the faulty product. Atom may satisfy its obligations under this Warranty in full by repair or replacement of a faulty product. This Warranty does not apply to consumable items such as lamps or batteries or other items that can be classified as consumable.
For the avoidance of any doubt, any warranties or conditions which are not guaranteed under the Australian Competition and Consumer Act or the Australian Competition and Consumer Regulations 2010 and which are not expressly included in this Warranty as additional warranties or conditions are excluded.
This Warranty does not cover loss or damage caused by wear and tear, misuse, incorrect installation or operation, failure to clean and maintain, incorrect voltage or non-authorized electrical connections, adverse external conditions (such as power surges and dips, acts of God, exposure to heat, corrosion, insect or vermin infestation), use of non-authorized or defective parts or globes, or to items that have been repaired other than by Atom or a repairer approved by Atom.
Atom is a registered brand of Evolt Pty Limited.
IMPORTANT: THIS PRODUCT MUST BE INSTALLED BY A LICENSED ELECTRICIAN Due to changes in industry standards and Evolt’s policy of continual product development, product specifications are subject to change without notice. Images are for illustrative purposes only. For further information please call evolt’s head office on 1300 4EVOLT (438 658) Evolt Pty Limited PO BOX 271 KINGSGROVE NSW 1480 ABN 83 112 123 529 www.evolt.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>