Woodsam JXX-LMR LED Lighted Mirror Installation Guide
- June 16, 2024
- Woodsam
Table of Contents
Woodsam JXX-LMR LED Lighted Mirror
Tools
Tools you may need (Not included)
WARNING
Power Off
- Switch off the electrical supply on the mains unit before installation and maintenance.
Warning
- Please pay attention to the edge of the LED mirror before finishing the installation.
WARNING
- Please read these instructions thoroughly before beginning installation. If in doubt consult your electrician
- This product is only suitable for indoor installation.
- Wiring the power supply according to the requirements of the local electrical codes. It must be installed by professional electricians.
- Use within the safe voltage range; keep the voltage between 110V to 240V. If the voltage exceeds 240V, please use a transformer.
- Wrap the wires with electrical tape to prevent leakage.
- Do not strike the mirror glass with hard or sharp objects.
- Don’t strike the edge of the mirror, please handle it with care.
Installation Instruction
Step 1
- Power Off: Switch off the electric supply at the mains before beginning.
Step 2
- Mark the wall with a pencil and ensure that mirror is level and check there are no hidden pipes or cable before drilling.
- Drill holes to attach the hanging bracket and make the position can bear the weight of the whole product.
Step 3
- We provide the live, ground, and neutral wires; please check the corresponding wires to connect.
Step 4
- Carefully hang the mirror.
Step 5
- Switch on the main power to check if the mirror is working.
About the Touch Sensor Buttons
- Turn On/Off the LED Lights
- Press the button quickly to switch to a different color temperature
- Press the button about 3 to 5 seconds to dim or brighten the lights
Turn On/Off the Anti-Fog
Contact
If you have any questions, please contact our Customer Service:
- Email: support@woodsam.com
- Address: 1800 S Archibald Ave,Ontario CA 91761
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>