Woodsam 48×40 Inch LED Lighted Mirror Instruction Manual
- June 17, 2024
- Woodsam
Table of Contents
Instruction Manual
LED Mirror
Installation Instruction
48×40 Inch LED Lighted Mirror
Tools you may need (Not included):
WARNING:
- Please read these instructions thoroughly before beginning installation. If in doubt consult your electrician.
- This product is only suitable for indoor installation.
- Wiring the power supply according to the requirements of the local electrical codes. It must be installed by professional electricians.
- Use within the safe voltage range; keep the voltage between 110V to 240V. If the voltage exceeds 240V, please use a transformer.
- Wrap the wires with electrical tape to prevent leakage.
- Do not strike the mirror glass with hard or sharp objects.
Don’t strike the edge of the mirror, the glass is fragile, please don’t remove the plastic corner protector before completing the installation.
Installation Instruction
Switch off the electric supply at the mains before beginning.
Mark the wall with a pencil and ensure that mirror is level
and check there are no hidden pipes or cable before drilling. Drill holes to
attach the hanging bracket and make the position can bear the weight of the
whole product. 
We provide the live, ground, and neutral
wires; please check the corresponding wires to connect. 
Switch on the main power to check if the mirror is
working.
About the Touch Sensor Buttons:
- Turn On/Off the LED Lights
- Press the button quickly to switch to a different color temperature
- Press the button about 3 to 5 seconds to dim or brighten the lights
Turn On/Off the Anti-Fog
If you have any questions, please contact our Customer Service:
Email: support@woodsam.com
Address: 1800 S Archibald Ave,Ontario CA 91761