MAGICSHINE RAY 1600B Lumen Headlight User Manual

RAY 1600B Lumen Headlight
User Manual

RAY 1600B Lumen Headlight

RAY 1600B/2600B
USER MANUAL

WARNING
To prevent inadvertent switching on, please keep the light unit in lockout mode before transport or storage.

IN THE BOX

Note: There is only one light unit in each package.

CONNECT WITH THE APP

https://shop16628851.m.youzan.com/v2/feature/zkcanhxg?redirect_count=1

APP CONNECTION:

1. iOS users scan the QR code of the manual, and Android users go to the MAGICSHINE website“www.magicshine.com”(SUPPORT>User Manual>App Download for Android) to download the APP using your smartphone.
2. Turn on the Bluetooth of your smartphone and open the APP, click “Add New Devices” and find “M2-B3”. Click “Add”, then click “Connect the device”.

APP SETTINGS:

1. Click “Add” at the bottom to enter the “Device Settings” interface.
2. Click “Mode 1” or “Mode 2”, you can customize “Constant mode,” “SOS,” “Slow flash,” and “Quick flash,” as well as their corresponding brightness.
3. Up to 20 customized modes are supported. *When you delete all customized modes in the APP, the light will return to the factory default mode.

HOW TO INSTALL

OPERATING INSTRUCTIONS

REMOTE CONTROL PAIRING:
Before using the remote control, please remove the insulating spacer and reinstall the battery.
Turn on the light, press and hold the “○””□” buttons on the remote for about 10 seconds until the indicator alternately flashes blue to enter pairing mode. Then, close the remote to the light until the indicators on the remote and light unit are constantly blue for 2 seconds, confirming a successful pairing.
REMOTE CONTROL OPERATION:
ON/OFF: Press and hold the “○”/”□” button for 1 second
ADJUST BRIGHTNESS: Click the “○” button
CHANGE MODE: Double click the “○” button
FLASH MODE: Double click the “□” button
FULL OUTPUT MODE (1600LM/2600LM): Click the “□” button to go into Full Output Mode and click the “○”/”□” button to return to the previous mode.
The remote control will enter sleep mode if the light is turned off for 48 hours without any operation.
Click the light’s button to activate it or long-press the  light’s button to turn it on, and the remote control can work normally.
HEADLIGHT BUTTON INSTRUCTIONS:
ON/OFF: Press and hold the button to turn the light on / off. The default output is the last mode when turned off.
ADJUST BRIGHTNESS: Click the “︵” button to increase the brightness, and click the “︶” button to decrease the brightness.
CHANGE MODE: Double click the button to change between floodlight mode and hybrid mode.
LOCKOUT: When the light is off, press and hold the button for 3 seconds to enter lockout mode. (In lockout mode, the light will not light up and the indicator flashes red quickly)
UNLOCK : In lockout mode, press and hold the button for 3 seconds to unlock the light.
VIBRATION SENSOR: The light will go out automatically after 2 minutes of inaction and automatically light up on any vibrations. The light will automatically turn off if no vibration is detected within 30 minutes.(The vibration sensor is off by default, activate it through the APP.)
BRIGHTNESS SENSOR: During the daytime, the light will automatically turn to LOW brightness in floodlight mode. At nighttime, the light will automatically return to the brightness that it’s in when turned on. (The light sensor is off by default, activate it through the APP.)

OUTPUT / RUNTIME

RAY 1600B

RAY 2600B

• All data are measured in accordance with
  ANSI/NEMA FL 1-2009. The test was conducted at a temperature of 25°C and a wind speed of 25 km/h.
  The runtime may vary depending on external temperature and ventilation conditions, and these deviations may affect the result of testing.

CHARGING / BATTERY INDICATOR

When the light is off, click the power button to display the remaining battery level for 3 seconds.
RAY 1600B 3.5 hrs (5V 2A)
RAY 2500B 3.5 hrs (5V 2A)

BATTERY INDICATOR
21%-100%：Constant green
11%-20%：Constant red
0%-10%：Flashing red
Charging: Flashing red
Fully charged: Constant green

Press the “○”/”□” button on the remote control to display the remaining battery level of the light unit.
100%-21%: Green
20%-11%: Red
10%-1%: Flashing red

WARRANTY

The Magicshine lighting system is warrantied for 24 months from the date of purchase.
If you register the lighting system on the Magicshine website you will receive a bonus 6 month warranty.
Battery packs and AC adapters have a 6 month warranty, however, there is no bonus warranty available.
The warranty is limited to defects in material and workmanship on the lighting system itself, the battery pack and the AC adapter.
The warranty is only valid if the affected parts have not been tampered with and there is no intentional damage.
Please keep your proof of purchase in a safe place. Proof of purchase must be presented in the event of any claim.
Please contact the specialist retailer from whom you purchased the device for complaint or warranty claim.
Alternatively, you can send your complaint or claim directly to Magicshine at
Tel: (+86) 755-295 536 69
Fax: (+86)755-275 897 77
E-mail: support@magicshine.com (order from Magicshine.com online store) service@magicshine.com(order from other sales channels)
In the event of a justified warranty claim and delivery of a replacement device, you will only be entitled to a model available when replacing. The manufacturer retains the right to make technical modifications.

Name:
Tel:
E-Mail:
Address;
Zip :
Product  Information
Company Name / Website of the Selle;
Product Name:
Model No.:
E-maill:
Date of Purchase:
Contact:
Tel:
Address:
Zip:

Product Serial Numbur

Note: Register on Website to Gain 6 Months Extra Warranty Rights.

• Proof of purchase Is required when obtaining warranty service.
• DO NOT return suspected defective parts directly to MAGICSHINE or the seller.
• De fective parts must only be sent to the seller you purchased your product from. Please contact them beforehand to confirm acceptance.

References

• Best Bike Lights for Night Riding - Magicshine Store
• Best Bike Lights for Night Riding - Magicshine Store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>