Breezary 30015-AW-NL Ceiling Fan without Light User Manual
- June 16, 2024
- Breezary
Table of Contents
- 30015-AW-NL Ceiling Fan without Light
- Product Information
- Specifications:
- Hardware Package:
- Components:
- Step 1: Attaching the Fan Blades
- Step 2: Attaching the Motor Housing
- Step 3: Mounting
- Step 4: Mounting to Outlet Box
- Step 5: Receiver Installation
- Step 6: Wiring the Fan
- Q: Can I use this ceiling fan with a variable (rheostat) wall
- Q: How do I clean the fixture?
- Q: Do I need to check and retighten the screws before
30015-AW-NL Ceiling Fan without Light
Product Information
Specifications:
- Item name: Ceiling Fans Without Light
- Item number: 30015
- Dimensions: 5.9 in x 2.2 in x 11.2 in x 12.2 in
Hardware Package:
- S1: Machine Screw – Quantity: 2
- S2: Washer – Quantity: 4
- S3: Wood Screw – Quantity: 4
- S4: Wire Nut – Quantity: 3
- S5: Blade Screw – Quantity: 7
- S6: Jam Screw – Quantity: 2
- S7: Balance Kit – Quantity: 1
Components:
- Remote Control
- Hanger
- Canopy
- Canopy Cover
- Yoke Cover
- Downrod
- Long Downrod
- Motor Housing
- Motor
- Blade
Product Usage Instructions
Step 1: Attaching the Fan Blades
- Attach the blade to the motor with blade screws.
- Repeat this step for each blade assembly.
Step 2: Attaching the Motor Housing
-
Attach the motor housing to the motor with motor housing
screws. -
Repeat this step for each assembly.
Step 3: Mounting
-
Take out the fan downrod.
-
Remove the cotter pin and bolt from the downrod.
-
Take out the fan motor housing.
-
Place the downrod inside the canopy, canopy cover, and yoke
cover. -
Route wires exiting motor through yoke cover, canopy, and
downrod. -
Insert bolt through the hole in the downrod and tighten it.
Secure with the cotter pin through the hole in the end of the
bolt. -
Remove the screws from the screw pack and secure the downrod in
position by tightening jam screws. -
Slide yoke cover down until it is flush with the motor
housing.
Step 4: Mounting to Outlet Box
WARNING: To reduce the risk of fire, electric
shock, or personal injury, mount to UL/CSA listed outlet box marked
acceptable for fan support and use mounting screws provided with
the outlet box.
- Secure hanger to the metal outlet box.
- Hang the ceiling fan on the hanger, aligning the hanger ball
groove with the hanger boss.
Step 5: Receiver Installation
- Put the receiver in the hanger.
Step 6: Wiring the Fan
Wiring according to the wiring diagram:
From ceiling From fan
white white
black black
grounding wires (From ceiling) grounding wires (From receiver)
grounding wires (From fan)
FAQ (Frequently Asked Questions)
Q: Can I use this ceiling fan with a variable (rheostat) wall
control?
A: No, to reduce the risk of fire or injury, do not use this
product in conjunction with any variable (rheostat) wall
control.
Q: How do I clean the fixture?
A: Turn off the power, wait for it to cool, and wipe the fixture
with a clean dry, soft cloth.
Q: Do I need to check and retighten the screws before
installation?
A: Yes, all screws must be checked and retightened where
necessary before installation.
CEILING FANS WITHOUT LIGHT
ITEM #30015 Customer Service: support@ breezary.com
1
Installation Instructions Troubleshooting Guide Balancing Kit
5-10 11 12
To reduce the risk of fire or injury do not use this product in conjunction
with any variable (rheostat) wall control. objects.
5. To clean the fixture ,turn off the power, wait for it to cool, and wipe
the fixture with a clean dry, soft cloth.
7. All screws must be checked and retightened where necessary before
installation.
2
5.9 in
2.2 in 11.2 in 12.2 in
S1 S2 S3 S4
OFF ON/O FF
F
R
3
2
4
SETU
1
P STOP
5
6
1H
4H
8H
2
3 4 5
6
52 in
S5
Hardware Package
S1.Machine Screw
S6
S2.Washer
S3.Wood Screw
S7
S4.Wire Nut S5.Blade Screw
S6.Jam Screw
S7.Balance Kit
Item name
7
1.Remote Control
2.Hanger
3.Canopy
8
4.Canopy Cover
5.Yoke Cover
6.Downrod
7.Long Downrod
8.Motor Housing
9
9.Motor
10.Blade
10
3
Quantity
2 4 4 3 7 2 1
1 1 1 1 1 1 1 1 1 3
Receiver Bolt
Jam Screw
Blade
Hanger Bracket Canopy Screw Hanger Ball Canopy Canopy Cover Yuke Cover Cotter
Pin
Motor Housing
Motor
4
Step1 Attaching the Fan Blades.
– Attach the blade to the motor with blade screws. – Repeat this step for each
blade assembly.
Fig.1
Blade screw
Blade
Step2 Attaching the Motor Housing.
– Attach the motor housing to the motor with motor housing screws. – Repeat
this step assembly.
Fig.2
Motor housing screw
Motor housing
5
Step3 MOUNTING.
– Take out fan downrod. – Remove cotter pin and bolt from downrod.3a – Take
out fan motor housng. – Place the downrod inside the canopy, canopy cover, and
yoke cover.(3b)
– Route wires exiting motor through yoke cover, canopy and downrod.(3c) –
Insert bolt through hole in and downrod. Be careful not to damage or cut the
fan wires. – Tighten bolt. Secure with cotter pin through hole in the end of
the bolt.(3d) – Remove the screws from the screw pack and secure downrod in
position by tightening
jam screws.
– Slide yoke cover down and it will flush with the motor housing.
Fig.3a Cotter Pin
Fig.3c
Yoke Cover Bolt
Fig.3b
Downrod Bolt
Downrod
Canopy Canopy Cover
Cotter Pin Yoke
Fig.3d Jam Screw
Jam Screw
Downrod Canopy
Canopy Cover
Yoke Cover
Motor
6
Step4
WARNING: To reduce the risk of fire, electric shock, or personal Injury, mount
to UL/CSA listed outlet box marked acceptable for fan support and use mounting
screws provided with the outlet box
– Secure hanger to metal outlet box. – The ceiling fan is hung on the hanger,
with the hanger ball groove aligned with the
hanger boss.
Fig.4a
Fig.4b
Fig.4c
Washer
Outlet Box
Hanger Bracket
Hanger Projection
Outlet box screw not provided
Hanger Ball Groove
Step5 The receiver installation
– Put the receiver in the hanger.
Fig.5a
Fig.5b
Outlet Box Canopy Canopy Cover
Yoke Cover
Motor Housing
7
Step6 Wiring the Fan
– Wiring according to the wiring diagram.
Fig.6a
From ceiling
white
white
black
black
From fan
grounding wires (From ceiling)
grounding wires (From receiver)
grounding wires (From fan)
NOTE: Once ground wires are connected, carefully tuck all wires into the metal
box making sure that the wires are clear of the hemisphere and downrod when
positioned in hemisphere and downrod when positioned in mounting bracket.
Step7 Attaching the Canopy and Canopy cover
– Slide the canopy up to the ceiling and attach it to the hanger with the
screws provided. Tighten all screws securely.
– Move the Canopy cover onto the canopy. (the decorative cover comes with
magnetism)
Fig.7a
Fig.7b
Fig.7c
Canopy
Hanger Screw
2
Canopy Cover
1
8
CONGRATULATIONS! YOU HAVE COMPLETED THE INSTALLATION
9
FUNCTION INSTRUCTION OF REMOTE CONTROL
– Open battery cover on the hand-held remote and install battery, pair of AAA
of remote control(1.5V) that are not included.
– If the remote control can not control the fan, learning code matching mode
is used between remote control and receiver.
Turn on the power switch, press the”SETUP”key within 3 seconds, the receiver
issued a”tick”two sounds, the pair code is successful. If not successful, turn
off the power for a minute and repeat the above.
-When the remote control cannot control the receiver, please check the battery switch touching normally or not, correction of the positive and negative, full or empty of the power.
-When the remote control cannot control the receiver, please check is there any existence of similar remote controlled products nearby, then check whether they works, because remote controlled product with the same frequency will disturb each other.
-Please remove the battery from the remote control when not in use for a long time.
– When installing the fan, the fan ceiling cover don’t press the antenna(or
other wire), it is easy to breakdown the wire and short-circuited.
1 All off 2 Fan forward 3 Natural wind 4 Speed controller 5 Match code/Fan off
6 Timer 7 Light on/off 8 Fan reversal
Notice: This mode of ceiling fan is without light.
1
OFF
ON/OFF
7
2
F
R
8
3
3
4
2 4 STOP
1 5 SETUP
6
5
6
1H 2H 4H
10
11
3. Turn the fan on. Observe whether the wobble has increased or decreased.
Turn the fan off, move the clip to another blade, and retest. Repeat this
procedure on all blades noting the blade on which the greatest improvement is
achieved.
BALANCING WEIGHT PLASTIC CLIP
12
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>