Govee H61BC RGBICW LED Strip Light User Manual

Govee H61BC RGBICW LED Strip Light

Safety Instructions

Read and follow all the safety instructions:

• Use the product with the provided power adapter only.
• Be cautious of static electricity during installation and usage. Keep the product away from sl1arp objects or strong corrosive chemicals.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip light near any heat sources.
• Do not allow children to install the strip light alone.
• Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Unroll the strip light before powering on.
• Please turn off the power and unplug the adapter when the strip light will not be used for a long time.
• The recommended working temperature is between
• The storage temperature should be between -20-60°C.
• Do not stick the strip light to glass surface.

Introduction

Thanks for choosing Govee RGBICW LED Strip Light. The 1 Om RGBICW LED strip ai:lopts the latest 4-in-1 RGBWlight beads and RGBIC + technology. Combined with 24 lightsrm light bead density and independent control of the color of each segment, it brings you richer color choices and higher brightness that can provide you with an entirely new light and color experience. When connected with Govee Home App, you can adjust its colors, brightness, and scene modes to your liking. It also supports voice assistants such as Alexa and Google Assistant.

What You Get

• LED Strip Lights: 1
• Adapter: 1
• User Manual: 1
• Service Card: 1

At a Glance

Installing Your Device

Before You Install

1. Unpack the box and check all items listed in the packing list.
2. Power on the strip light and check whether it lights up.

Installing Steps

1. Wipe the surface to make sure it’s clean and dry.
2. Peel off the protective film on the tape, stick the strip on and press over it firmly.
3. Peel off the protective film on the control box and stick it on.Place the control box close to the music source to achieve the best music effect.
4. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

What You Need

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Pairing Instructions

• Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
• Turn on Bluetooth on your smartphone.
• Open the app, tap the”+” icon in the top right corner and search for “H61 BC”.
• Tap the device icon and follow the on-screen instructions to complete the pairing.

Controlling the Device with Your Voice

• Open the app, then tap the device icon to enter the detail page.
• Tap the setting icon in the top right corner.
• Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

• Length: 10m/32.8ft
• Light Color: RGBICW
• control Method: App, Control Box, Voice Control
• Power Supply: Adapter 24V

Troubleshooting

1. The adhesive tape is not strong enough.
   • Make sure the installation surface is clean and dry.
   • Firmly press over the strip after sticking.
   • Reinforce the installation via more clips and tape.
2. Cannot connect to Bluetooth.
   • Do not skip Bluetooth connection in the app.
   • Ensure Bluetooth on your smartphone has been turned on.
   • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
   • Power the strip lights and your smartphone Bluetooth off then on, then try again.
   • Ensure that your smartphone is within 1 m/3.28ft of the strip lights when connecting.
   • Clear any obstructions that are between the strip lights and your smartphone.
3. The strip lights does not display the full selected color/Some LED beads do not light up.
   • Please contact the Govee support team for rapid product replacement.
4. Cannot sync the strip lights to the beat of my music.
   • Move the control box closer to the music source.
   • Clean the mic on the control box then try again.
5. Cannot connect to Wi-Fi.
   • Do not skip the Wi-Fi connecting steps in the app.
   • 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
   • Connect your phone to Wi-Fi and check whether the network works well.
   • Make sure you have entered the correct Wi-Fi name and password.
   • Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
   • Connect hotspot in your phone to the strip lights and check whether the router works with the strip lights.
6. Cannot connect to Alexa.
   • Pull out every connective part of the strip lights and firmly re-connect them.
   • Re-connect your phone to Wi-Fi.
   • Plug out the adapter port and re-plug it in.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support e Email: [email protected]
• Official Website: www.govee.com
• @Govee
• @govee_official
• @govee.official
• @Goveeofficial
• @Govee.smarthome

FCC Statement

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and  Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interterence received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Responsible party (this contact information is only for FCC matters) :

• Name: GOVEE MOMENTS(US) TRADING LIMITED
• Address: 2501 Chatham Rd Suite R Springfield IL 62704
• Email: [email protected]
• Contact information: https://www.govee.com/support

For FAQs and more information, please visit:

• www.govee.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>