Halla Lina60 Interior LED Luminaires Installation Guide
- June 16, 2024
- Halla
Table of Contents
Halla Lina60 Interior LED Luminaires
Specifications
- Model: Lina60
- Length (L): 561mm, 842mm, 1122mm, 1403mm, 1683mm, 1964mm
- 2244mm, 3366mm, 4488mm
Product Usage Instructions
Section A: Installation and Setup
- Ensure that the luminaire is not covered with insulating material.
- Locate the desired installation location for the luminaire.
- Make sure the minimum clearance of 50mm is maintained between the luminaire and any surrounding objects.
- Connect the luminaire to a suitable power source.
Section B: Replacing the Light Source
The
light source in this luminaire should only be replaced by the manufacturer,
its contractual service technician, or a similarly qualified person.
Section C: Usage and Operation
- To turn on the luminaire, press the “ON” button.
- To adjust the brightness, use the provided control buttons.
- For emergency situations, press the “OPEN” button to activate the emergency lighting mode.
- When not in use, turn off the luminaire by pressing the “OFF” button.
Installation instruction
The light source in this luminaire may be replaced only by the manufacturer or its contractual service technician or a similarly qualified person!
The installation may only be carried by authorised specialist. Always switch- off the power supply before carrying out any maintenance.
The manufacturer is not responsible for the incorrect use and assembly of its products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>