EMSQ22 Daikin ONE Lite Smart Thermostat User Manual

DAIKIN ONE LITE
SMART THERMOSTAT
Homeowner Guide

Welcome! This homeowner guide features an overview of functions and/or features available through the Daikin One lite smart thermostat.
The Daikin One home app is the preferred means of accessing these features, but the instructions that follow are helpful if the app is not used.

Create a Daikin One home app account

1. After installing the Daikin One home app from the App Store or Play Store, select “Create Account”.
2. Review the documents and select “I Agree”.
3. Enter your name, email address, and a password that meets the length and complexity requirements.
4. Check your email account for an email with your account verifi cation code.
5. Enter the verifi cation code in the app and select “Confirm Code”. When successful, you will next be asked about enabling biometrics, and then navigated to the “my home” screen.

To learn more about operating the Daikin One lite smart thermostat, visit our how-to videos at: https://daikinone.com/product/one-lite-smart-thermostat

Add location name and address to the Daikin One home app

1. After creating a Daikin One home account, you will be prompted to add a location. If you already have a location and want to add another, select “add location” on the “settings” screen.
2. Enter the location name and address, then select “Next”.
3. Verify the location address on the map. Move the pin to the correct location if needed, then select “Save This Location”.
4. You will be navigated to the “my home” page where you can add a thermostat.

Connect thermostat to Wi-Fi using the Daikin One home app

1. After creating a Daikin One home account and adding a location, select “Add Device” to add a thermostat. To add additional thermostats, select “add device” found in drop down menu at the top left of the “my home” screen.
2. Select “Daikin One lite smart thermostat” from the list, select a location, and press “Next”.
3. Select “Connect to Wi-Fi”.
4. Press the fan button for 5 seconds, then press the cooler/down button to put the thermostat in “AP MODE”, then return to the app and select “Next”.
5. Follow these instructions to directly connect the phone Wi-Fi to the thermostat, then select “Next” in the app.
6. Follow these instructions to go to your phone’s Wi-Fi settings to connect the phone Wi-Fi directly to the thermostat, then return to the Daikin One home app and select “Next”.
7. Select “choose network”, then select the appropriate Wi-Fi network from the list.
8. Enter the password and select “Connect”.
9. Confiappears screen,
10. Confi rm that the Wi-Fi icon appears on the thermostat screen, then select “Finish”.

Connecting to the Daikin One home app

1. After creating a Daikin One home account and connected the Lite thermostat to Wi-Fi, select “Add Device” from the “my home” screen. To add additional thermostats, select “add device” found in drop down menu at the top left of the “my home” screen.
2. Select “Daikin One lite smart thermostat” from the list, select a location, and press “Next”.
3. Press and hold the fan button on the thermostat for 5  seconds to put the thermostatic “Wireless Setup” mode, then select “Next” in the app.
4. Press the up/warmer button on the thermostat to display the 6-digit pairing code, then return to the app and select “Next”.
5. Enter the pairing code and select “Add”.
6. Confi rm that the newly added thermostat appears on the “My Home” screen.
   You are now able to control your thermostat from your phone using the Daikin One home app!

Control / Interface Overview

Mode Selection

On-screen display

Press the mode button cycles through available modes.
As each mode is selected, its name appears in the upper left corner of the display. The text disappears 1 second after the mode is selected, but the relevant setpoints for the selected mode are always displayed.

Adjust Setpoint

Increasing the temperature
Press the up arrow button to raise the setpoint.
Decreasing the temperature Press the down arrow button lowers the setpoint.
Raising and lowering the setpoint Button presses raises and lowers the temperature by 1 degree when using Fahrenheit degree units. When using Celsius the temperature raises and lowers by 0.5 degrees.
Note : For cool only mini and multiplot systems, heat mode, auto mode, emergency heat mode, and all heat setpoints including those for away mode and schedule mode are hidden.

Press the up and down
buttons have no effect when the system is off

When set to auto mode, pressing the up arrow button increases both the heat and cool setpoints. Pressing the down arrow button decreases both the heat and cool setpoints.
To adjust heat or cool setpoints individually, switch to heat or cool mode, adjust the setpoint, and then return to auto mode.
When either the cool or heat setpoints hit the top/bottom of the scale the other setpoint will continue to adjust until the minimum difference between setpoints is hit.

When set to heat or cool modes, pressing the up arrow button raises the setpoint. Pressing the down arrow button lowers the setpoint.

When the schedule is enabled, the up and down buttons raise and lower the setpoints as usual. Adjustments made this way remain in place until the next schedule event is reached.
For example, if a schedule has been set to heat to 68°F during the day period and 72°F during the evening period, changing the setpoint to 74°F at 4pm will override the day schedule.
When the evening period begins, the system will revert back to the scheduled 72°F.

Setting Fan Settings*

*Fan settings can be changed more easily on the air quality screen of the Daikin One home app

• Pressing the fan button on the thermostat will turn the fan on and off.
• Press and hold the fan button for 2 seconds to access the fan settings. Next, press either the mode or fan button to advance through each of the fan settings.
• For the cool and heat fan speeds, press the up and down buttons to cycle through the available fan speeds of auto and 1 (low) through 5 (high).
• The cool and heat louver position settings are available for indoor units that support these settings. When the vertical or horizontal louver swing is turned on, the louvers will oscillate in the relevant direction. A fixed direction can be set by turning the appropriate swing setting off when the louvers are in the desired position.
• Press and hold the mode button for 2 seconds at any time to exit the home screen. The system will return to the home screen automatically after 2 minutes of inactivity.

Setting the Schedule

Setting the daily schedule
Setting up a daily schedule can be accomplished more easily using the Daikin One home app. A schedule automatically uses different heat and/or cool setpoints for different days of the week and different periods of each day. The schedule repeats each week, and can have up to 4 schedule events per day, each with its own heat and cool setpoints.

Press and hold the fan and warmer (up) buttons for 2 seconds to enter schedule mode for programming a  schedule. While in schedule mode, press the mode button to advance through each setting for each day of the week and each time period of each day.
To exit schedule mode and return to the home screen at any time, press and hold the mode button for 2 seconds.
The system will return to the home screen automatically after 2 minutes of inactivity.

Setting Away Setpoints

Setting away setpoints
The Away setpoints allow you to save energy by limiting heating and cooling when you are away from home. The Away setpoints are also used when geofencing is enabled in the Daikin One Home App, and can be more easily setup in the app..

• Press and hold the mode and cooler “down” buttons to enter the settings for Away mode.
• Press the the mode button to advance through the away mode settings, and use the warmer (up) and cooler (down) buttons to change each setting.
• To exit to the home screen at any time, press and hold the mode button for 2 seconds.
  The system will return to the home screen automatically after 2 minutes of inactivity.

Locking/Unlocking the Keypad

Setting the daily schedule
To prevent unauthorized use of the thermostat, the front panel buttons may be disabled by locking them.

To disable, or “lock” the keypad, press and hold the mode button. While holding the mode button, press the warmer (up) and cooler (down) buttons together, for two seconds. The lock icon will appear on the display, then release the buttons.
To unlock the keypad, press and hold the mode button. While holding the mode button, press the warmer (up) and cooler (down) buttons together, for two seconds. The lock icon will disappear from the display, then release the buttons.

Important Notes

NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Daikin could void the user’s authority to operate the equipment.
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

REMARQUE:

FOR ADDITIONAL RESOURCES AND INSTRUCTIONAL VIDEOS,
SCAN CODE OR VISIT: WWW.DAIKINONE.COM

If you encounter any issues or would like assistance with setting up your Daikin One lite smart thermostat, please contact Daikin support at 1-855-Daikin1 and select OPTION SEVEN to be connected with our thermostat support team.

ADDITIONAL INFORMATION
Before purchasing this appliance, read important information about its estimated annual energy consumption, yearly operating cost, or energy efficiency rating that is available from your retailer.

Our continuing commitment to quality products may mean a change in specifications without notice.
© 2023 DAIKIN COMFORT TECHNOLOGIES NORTH AMERICA, INC. Houston, Texas

• USA
• www.daikincomfort.com or www.daikinac.com
  HG-ONELite_ST_02-23

References

• Daikin ONE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>