Sunco DL SL3-8W-27K 5K 3 Inch Ultra Slim Selectable Downlight User Manual
- June 16, 2024
- SUNCO
Table of Contents
Lighting made better.
User Manual
3″ Ultra-Slim Selectable Downlight
SKU: DL_SL3-8W-27K_5K
support@sunco.com
844-334-9938
AMERICAN COMPANY
Whats in the Box?
Slim Downlight
Why Plastic Junction Boxes?
At Sunco, our commitment to safety and reliability is at the core of our
lighting solutions, ensuring your peace of mind.
| Plastic’s corrosion resistance ensures longer product lifespans with minimal
maintenance.
---|---
| Plastic junction boxes are non-conductive, significantly helping prevent
potential fires.
| Plastic junction boxes feature smooth edges, minimizing accidental cuts.
| No need for a ground wire
Get Your Gear
Before You Start
Safety Information
To reduce the risk of fire, electric shock, or physical injury:
- Turn off circuit breaker before installing this fixture.
- Professional installation required. Safety gear recommended.
- Abide by regional and local laws or regulations.
- Proper grounding is required to ensure safety.
- Do not alter, or remove wiring during installation.
- Do not make or alter any open holes in wiring enclosure or electrical components during installation.
- Check for shipping damage before insatalling. If the product is damaged, do not use it.
- Keep fixture away from corrosive substances.
- Suitable for damp locations at temperature ranging from 4°F to 113°F. Not for use where directly exposed to water.
- Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
- Use safety precautions and abide by regional and local laws or regulations.
- This product is not compatible with 3rd party sensors.
- This product is not compatible with photo controls.
- This product is not compatible with occupancy sensors.
- This product is not compatible with timing devices.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.
Quickstart Guide
Installation Guide
STEP 1
a. Turn off circuit breaker before installation.
b. Cut out 3.5″ housing size on Installation Template, then tape onto ceiling
in desired location.
c. Cut ceiling hole using Installation Template as a guide.
STEP 2
a. Open junction box and remove appropriate knockout.
STEP 3
a. Connect supply and junction wires using wire nuts: -Black to Black (Live)
-White to White (Neutral)
b. Tuck connected wires inside junction box & close cover.
STEP 4
On back of junction box, slide the CCT Switch to choose from 5 color
temperatures. Insert junction box through ceiling hole.
NOTE: Junction box should be secured to studs, joists, or similar fixed
structural units.
STEP 5
a. Attach fixture to junction box using connector as shown on image (1).
Tighten connector by hand (2).
b. Push up spring clips and insert fixture into ceiling. Turn on circuit
breaker and test light.
STEP 6
a. Push up spring clips and insert fixture into ceiling.
b. Turn on circuit breaker and test light.
Product Details
Recommended Dimmers
Brand | Model |
---|---|
LUTRON | P-PKG1WB-WH |
LUTRON | MACL-153M-WH |
LUTRON | PD-6WCL-WH |
LUTRON | AYCL-153P-WH |
LUTRON | DVCL-153P-WH |
LEVITON | D26HD-2RW |
KASA SMART | HS220 |
KASA SMART | HS220P3 |
Scan for the full compatible dimmer list!
Voltage | 120V |
---|---|
Wattage | 8W |
Wattage Equivalency | 45W |
Beam Angle | 90° |
Weight | 0.35lbs |
Housing Material | Plastic |
Dimmable | Ye s |
Average Lifetime | 50,000 hrs |
Lumens | 500LM |
Moisture Rating | Damp |
CRI | 90+ |
Usage | Indoor |
IC Rated | Ye s |
Warranty | 7 Years |
Common Troubleshooting
Need help? Our troubleshooting section is here to help.
Contact us for expert assistance and brighten your day!
Light isn’t turning on.| Double check if fixture is properly connected and
circuit breaker hasn’t been tripped.
---|---
Light isn’t bright enough.| Check proper wattage and for unobstructed fixture.
Light not dimming to lowest setting.| Ensure minimum dimmer load requirement
met.
Light not dimming smoothly.| Verify dimmer compatibility with fixture.
Light not compatible with dimmer switch.| Check light-dimmer compatibility.
Light is flickering when turning on.| Check that fixture wiring connections
secure.
Light flickering with other lights on same circuit.| Check that lights are not
overloading the circuit.
Light flickering when turned on.| Verify fixture compatibility and that it is
grounded.
Light flickering when dimmed.| Verify dimmer switch compatibility.
Fixture buzzing with power outages.| Verify light is connected to surge
protector.
Fixture buzzing with appliances.| Look for nearby interferences that can cause
buzzing. Such as televisions, radios, etc.
Fixture buzzing when dimmed.| Verify dimmer switch compatibility.
Light Distribution Angle
Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles: A symmetric lighting distribution emits light evenly in all directions, creating a coneshaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting. An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more.
Customer Support
Warranty Policy
****https://www.sunco.com/pages/warranty
30 Day Return Policy
At Sunco we value our customers and stand by the quality and performance of
our products.
If you are not completely satisfied with your purchase, we accept returns
within 30 days of your purchase date.
Customer Service
Our team of lighting experts is here to assist you with all your needs!
Contact us at:
Email:
support@sunco.com
Text or Call:
844-334-9938
6AM – 6PM PST Monday – Friday
Lighting made better.
support@sunco.com
844-334-9938
USA
AMERICAN COMPANY
REV1.0