Ya song Alarm YK500A2 Wireless Remote Control Siren Alarm Instruction Manual
- June 16, 2024
- Ya song Alarm
Table of Contents
Ya song Alarm YK500A2 Wireless Remote Control Siren Alarm
Product Information
Specifications
- Working Voltage: DC 9V
- Standby Current: 5 A
- Modulation Mode: OOK modulation
- Humidity: 10%~90% (no condensation)
- Encoding protocol: EV1527
- Transmitting current: 10 mA
- Operating Frequency: 315 MHZ
- Remote range: 500 meters
- Operating Temp.: -10~70
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. To reduce the risk of interference, please follow these guidelines:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no- collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Usage Instructions
Power Switch
The power switch has two positions: ON and OFF. Set the switch to the ON position for the device to be turned on, and set it to the OFF position for the device to be turned off.
Indicator Light
The top indicator light on the remote control flashes when the device is in use.
Battery Usage
Ensure you use the correct type of batteries for the remote control. Different types of batteries should not be mixed, as it may cause malfunctions. If the top indicator light appears dim, remove and reinsert the batteries. If the issue persists, the battery may be low and needs replacement. If the remote control is not used for an extended period, it is recommended to remove the batteries to prevent power loss. If the remote control is not used for a short period, turn off the power and turn it on when in use to conserve power.
Effective Range
Use the remote control within its effective range, which can vary depending on the environment. Try to avoid obstacles during use to ensure optimal performance.
Operating Temperature and Humidity
The remote control is designed to operate within a temperature range of -10°C to 70°C. It can tolerate humidity levels between 10% and 90% without condensation.
Size and Dimensions
The remote control dimensions are as follows:
- Width: 136mm
- Height: 25mm
- Depth: 42mm
Authorized Service
If you have any questions or issues with the remote control, please contact the manufacturer for authorized service. Do not attempt to open the remote control casing without authorization.
Remote Control Safety
Do not throw the remote control, and avoid any liquids entering the remote control. Keep the remote control away from direct sunlight or extremely hot environments, as it may lead to malfunctions.
FAQs
Q: What should I do if the top indicator light on the remote control appears dim?
A: Remove and reinsert the batteries. If the issue persists, the battery may be low and needs replacement.
Q: Can I mix different types of batteries in the remote control?
A: No, different types of batteries should not be mixed, as it may cause malfunctions.
Q: What is the effective range of the remote control?
A: The remote control has a range of 500 meters, but the specific control distance depends on the environment. Try to avoid obstacles during use to ensure optimal performance.
Q: Can I open the remote control casing?
A: No, do not attempt to open the remote control casing without authorization. If you have any questions or issues, please contact the manufacturer for authorized service.
Function Diagram
- Antenna: Extend and retract to adjust the remote control range.
- Top Indicator Light: When pressing the “Open” or “Close” button, the top indicator light flashes.
- Open Button: Controls the activation of the corresponding alarm.
- Close Button: Controls the deactivation of the corresponding alarm.
- Power Switch: Controls the on/off function of the remote control (“ON” position for on; “OFF” position for off).
Technical Specification
Operating instruction
- When using the remote control, toggle the Power Switch on the right side to the ‘ON’ position. Then, point the antenna towards the corre- sponding activated alarm.
- Press the ‘Open’ button on the remote control to activate the matching alarm; press the ‘Close’ button to deactivate the matching alarm.
- When not in use, toggle the ‘Power Switch’ on the right side to the ‘OFF’ position, and retract the antenna.”
Size Diagram
Caution
- Different types of batteries should not be mixed, as it may cause the malfunction of the remote control.
- Do not throw the remote control; avoid any liquids entering the remote control; keep the remote control away from direct sunlight or extremely hot environments, as it may lead to malfunctions.
- If the remote control is not used for an extended period, remove the batteries to prevent power loss.
- If the remote control is not used for a short period, turn off the power, and turn it on when in use to prevent power loss.
- Use the remote control within its effective range. The specific control distance depends on the environment; try to avoid obstacles during use.
- If the top indicator light on the remote control appears dim, remove and reinsert the batteries. If the issue persists, the battery may be low and needs replacement.
- Do not attempt to open the remote control casing without authorization. If you have any questions, please contact the manufacturer.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>