Sunco ST_DU-WH-3050K 4ft LED Strip Light Fixture User Manual

: June 16, 2024
: SUNCO

Table of Contents

Whats in the Box?
Before You Start
Installation Guide
Product Details
Common Troubleshooting
Light Distribution Angle
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sunco ST_DU-WH-3050K 4ft LED Strip Light Fixture

Whats in the Box?

Strip Light

J-Box Cover
x2
Plastic Anchor
x2
Screws
x2
Wire Nuts
x2

Get Your Gear

Drill
Screwdriver
Ladder
Wire Strippers

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

Turn off power before changing fixture.
Suitable for use in damp environments at temperatures ranging from -22°F to 122°F. Not for use where directly exposed to water.
Not intended for use with emergency fixtures.
Not compatible with photo controls.
Not compatible with occupancy sensors.
Not compatible with 3rd party sensors.
Not compatible with all dimmers. For more dimming information, please visit www.sunco.com.
Not compatible with timing devices.
All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.

WARNING:
Cancer & Reproductive Harm- www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quick start Guide

Step 1

Drill holes, insert rubber plugs.

Step 2

Attach kit’s disc to lamp (skip if hidden).

Step 3

Loosen lamp screws, open by hand.

Step 4

Guide wire, secure with kit screws.

Installation Guide

STEP 1

Turn off circuit breaker.

STEP 2

Drill holes to match product lengths, then insert rubber plugs from the kit.

STEP 3

Attach the kit’s disc to the lamp (skip if the light fixture fully conceals the wall junction box).

STEP 4

Use your hands to loosen the screws on both sides of the lamp and open it.

STEP 5

Guide the wire into the lamp and secure the lamp chassis with the included screws from the accessory kit.

STEP 6

a. Follow safety guidelines to connect the wires, then reattach the lamp body to the chassis.
b. Additionally, if desired, you can use an extra mounting bracket to connect the lights in series.

Product Details

Recommended Dimmers

Scan for the full compatible dimmer list!

Brand	Model
LUTRON	NTSTV-DV
LUTRON	NFTV-IV
LUTRON	DVTV-WH
LEVITON	IP710
LEVITON	DS710-10Z
LEGRAND	RH4FBL3PW

Specifications

Voltage	120V-277V	Average Lifetime	50,000 hrs
Wattage	20W/30W/40W	Lumens	3000,4700,6000
Wattage Equiv.	300W	Moisture Rating	IP40
Beam Angle	130°	CRI	>80
Weight	3.3lbs	Usage	Indoor
Housing Material	Sheet Metal	Amps	0.4A
Dimmable	0-10V	Warranty	7 Years

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.

If you still need some assistance, feel free to contact us. Our team of lighting experts are happy to help brighten your day.

Installation

Light isn’t turning on.| Double check if fixture is properly connected and circuit breaker hasn’t been tripped.
---|---
Light isn’t bright enough.| Check proper wattage & for unobstructed fixture.

Dimming

Light not dimming to lowest setting.| Ensure minimum dimmer load requirement is met.
---|---
Light not dimming smoothly.| Verify dimmer compatibility with fixture.
Light not compatible with dimmer switch.| Check light-dimmer compatibility. Consider purchasing compatible switch if necessary.

Flickering

Light is flickering when turning on.| Check that fixture wiring connections are secure.
---|---
Light flickering with lights on the same circuit.| Prevent circuit overload from lights.
Light flickering when turned on.| Verify fixture compatibility and that it is grounded.
Light flickering when dimmed.| Verify dimmer switch compatibility.

Buzzing

Fixture buzzing with power outages.| Confirm secure surge protector link for light.
---|---
Fixture buzzing with appliances.| Look for nearby interferences that can cause buzzing. Such as televisions, radios, etc.
Fixture buzzing when dimmed.| Verify dimmer switch compatibility

Light Distribution Angle

Not a lighting nerd?
No worries, you can skip this page

AVERAGE BEAM ANGLE (50%): 119.8 DEG

C0/180
C90/270
G6

The lighting distribution angle determines how light spreads from a source and impacts its illumination. Two main types exist: symmetric and asymmetric.

Symmetric Lighting: This emits light evenly in all directions, forming a cone-shaped pattern. Great for general lighting in large areas, it’s used for tasks like area illumination, security, and perimeter lighting. Also applied in up-lighting.

Asymmetric Lighting (Beam Angle): This directs light in a specific direction, reducing glare and spill. Ideal for task lighting, it’s common in settings like landscapes, retail stores, and museums.