YAMAHA e-Bike Diagnostic Software User Guide
- June 4, 2024
- Yamaha
Table of Contents
YAMAHA e-Bike Diagnostic Software
Installation
- If the PC has already installed Ver.1, please uninstall Ver.1 before installing Ver.2
- Software installation
- Device driver installation
Select an execute files that matches your PC system.
- For other Windows versions, please download the driver by yourself.
Hardware setup
Connection
Startup
- Connect the USB cable.
- Continue to push “assist mode switch (Down)” and “Power switch” over 2 sec. After 2 sec., “Pc” (for display A), “USB PC CONN” (for display C&X) will display on the meter
1. Launching the software
2. Right-click on the display, and select the comm. Port selection.
Features (Top display)
**FFD***
The freeze frame data (FFD) is the operation data when a malfunction was
detected.
This data can be used to identify when the malfunction occurred and check the
Drive Unit conditions when it occurred.
Features (Drive Unit / Display) 1/2
Features (Drive Unit / Display) 2/2
Features (Battery)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>