Kensington ValuOptical Wireless Mouse Instructions Manual
- June 16, 2024
- Kensington
Table of Contents
Kensington ValuOptical Wireless Mouse
Installation Instructions
To set up a wireless connection 1.
- After the receiver has been plugged into your computer.
- Step 1: Press the connection button on the Receiver, the light will begin to flash
- Step 2: Press the connection button on the base of the mouse, your RF connection is now set.
- You may need to reset your connection from time to time, follow steps 1 & 2.
Connecting your ValuOptical Wireless
- Your ValuOptical Wireless has a USB connector, which can work with both PCs and Macintosh® computers, and a PS/2 adapter for PCs.
Connecting to a PC
USB port: Plug the cord into your computer’s USB port or a USB port on a hub connected to your computer. You do not need to turn off your computer before connecting or disconnecting a USB device.
PS/2 mouse port:
- Turn off your computer.
- Plug the cable into the adapter, then plug the adapter into the computer’s PS/2 port.
- Reboot your computer.
Connecting to a Macintosh computer
- USB port: Plug the cord into your computer’s USB port. You may also use the spare USB port on your keyboard, or a USB port on a hub connected to your computer. You do not need to turn off your computer before connecting or disconnecting a USB device.
Power Save/Power Off
- The mouse will automatically switch to power save mode if it is left idle for more than eight minutes.
- To wake up the mouse, simply click one of the top buttons.
- For extended periods without use, the mouse can be powered off by pressing and holding the connect button located on the underside for three seconds.
- The LED on the underside of the mouse will not illuminate when powered off.
- To power on, press the connect button for three seconds.
Troubleshooting
| Symptom | Possible Causes | Solution |
|---|---|---|
| No mouse movement. | 1) Make sure the receiver is securely plugged in 2) Repeat |
the wireless connection procedure (p2) 3) Check batteries and replace them if
necessary|
The cursor on the screen remains at one spot or moves erratically.| | Mouse
performance can be affected by very shiny, reflective surfaces. Try using a
mouse mat.
For additional assistance, please visit www.kensingtoneurope.com
Warranty Information
5-Year Warranty
- KENSINGTON TECHNOLOGY GROUP (“KENSINGTON”) warrants this PRODUCT against defects in material and workmanship under normal use and service for five years from the original date of purchase.
- KENSINGTON, at its option, shall repair or replace the defective unit covered by this warranty.
- Please retain the dated sales receipt as evidence of the date of purchase.
- You will need it for any warranty service.
- To keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty.
- This warranty does not cover any damage due to accident, misuse, abuse, or negligence. This warranty is valued only if the product is used on the computer or system specified on the product box.
- Please check the product box for details, or e-mail technical support at [email protected].
- Repair or replacement, as provided under this warranty, is your exclusive remedy. KENSINGTON shall not be liable for any incidental or consequential damage. Implied warranties of merchantability and fitness for a particular purpose on this product are limited in duration to the duration of this warranty.
- Some countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some countries do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country.
Kensington does not warrant that the functions contained in the programme will meet your requirements or that the operation of the programme will be uninterrupted or error-free.
IN NO EVENT WILL KENSINGTON BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PROGRAMME(S) EVEN IF KENSINGTON OR AN AUTHORISED DEALER OR EITHER OF THEM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
- 1994-20030 Copyright All Rights Reserved
ACCO Europe
- Gatehouse Road, Aylesbury, Bucks HP19 8DT, United Kingdom
Kensington Technology Group
- 2000 Alameda de las Pulgas, Second Floor, San Mateo, CA 94403
ACCO Canada
- 5 Precidio Court, Brampton, Ontario, L65 6B7 ACCO Australia
- The Lakes Business Park, Level 2, Bid 8, Botany, NSW 2019, Australia
Support
Technical Support is available by telephone. Please visit www.kensingtoneurope.com for hours.
- US:
- 800-535-4242
- or 650-572-2700
- Fax: 650-572-9675
- Austria: 01 790 855 701
- Belgium: 02 275 0684
- Canada: 1 800 268 3447
- Denmark: 35 25 87 62
- Finland: 09 2290 6004
- France: 01 7020 0041
- Germany: 0211 6579 1159
- Ireland: 01 601 1163
- Italy: 02 4827 1154
- Mexico: 001 880 535 4242
- The Netherlands: 053 482 9868
- Norway: 22 70 82 01
- Spain: 91 662 38 33
- Sweden: 08 5792 9009
- Switzerland: 07 730 3830
- United Kingdom: 0207 949 0119
- Portugal: 800 831 438
- International Toll: +31 53 484 9135
Frequently Asked Questions
What is the model number of the Kensington ValuOptical Wireless Mouse?
The model number for the Kensington ValuOptical Wireless Mouse can typically be found on the packaging or in the product documentation that came with your mouse.
How do I connect my Kensington ValuOptical Wireless Mouse to my computer?
To connect your Kensington ValuOptical Wireless Mouse, simply plug the receiver into your computer's USB port and press the connection button on both the receiver and the base of the mouse to establish an RF connection.
Can the Kensington ValuOptical Wireless Mouse be used with both PC and Mac?
Yes, the Kensington ValuOptical Wireless Mouse is compatible with both PC and Macintosh® computers, using the USB connector or the PS/2 adapter for PCs.
Do I need to install any drivers for my Kensington ValuOptical Wireless Mouse?
No, the Kensington ValuOptical Wireless Mouse is designed to be plug-and-play, which means it does not require any additional drivers to be installed.
How can I save power with my Kensington ValuOptical Wireless Mouse?
The Kensington ValuOptical Wireless Mouse has an automatic power save mode that activates after eight minutes of inactivity. You can also manually power off the mouse by holding the connect button for three seconds.
What should I do if my Kensington ValuOptical Wireless Mouse is not responding?
If your Kensington ValuOptical Wireless Mouse is not responding, ensure the receiver is securely plugged in, repeat the wireless connection procedure, and check if the batteries need replacing.
Why is the cursor from my Kensington ValuOptical Wireless Mouse moving erratically?
Erratic cursor movement can be caused by reflective surfaces. Try placing a mouse mat under the Kensington ValuOptical Wireless Mouse to improve its tracking performance.
How can I clean my Kensington ValuOptical Wireless Mouse?
To clean your Kensington ValuOptical Wireless Mouse, gently wipe it with a soft, dry cloth. Avoid using any liquids or wet cloths.
What is the warranty period for the Kensington ValuOptical Wireless Mouse?
The Kensington ValuOptical Wireless Mouse comes with a 5-year warranty that covers defects in material and workmanship under normal use and service.
Can I use a USB hub to connect my Kensington ValuOptical Wireless Mouse to my computer?
Yes, you can connect the receiver of your Kensington ValuOptical Wireless Mouse to a USB hub that is connected to your computer.
How do I know if the batteries of my Kensington ValuOptical Wireless Mouse need replacing?
If your Kensington ValuOptical Wireless Mouse stops responding or the connection becomes intermittent, it may be a sign that the batteries need replacing.
How do I perform a reset on my Kensington ValuOptical Wireless Mouse?
To reset your Kensington ValuOptical Wireless Mouse, follow the wireless connection steps again by pressing the connection buttons on the receiver and the mouse.
Reference:Kensington ValuOptical Wireless Mouse Instructions Manual- fccid.io