GLOF BUDDY 2ALG4LPSMARTPIN 2S Rangefinder with Quick Grab Magnet Pin Finder User Manual
- June 16, 2024
- GLOF BUDDY
Table of Contents
SMART-PIN MANUAL
ACCURACY MATTERS™
PATENTS : SEE GOLFBUDDY.COM/PATENT
1.HW SPEC
HW SPEC
MCU
| STM BLE+MCU Flash 1M Byte
GPS
| UBLOX M8230/GPS, QZSS, GLONASS/SBAS
ANT
| KSCA-F2650MS619A – Flexible PCB Ant
Battery
| Li-ion – 21700/5000mAh/Samsung Cell X 4EA
Key
| Function Key, Reset Key
Type C USB
| F/W UP, Serial Log, Charge
Sensor
| G-sensor
ETC
|
2. Specifications
- SMART PIN
- BATTERY
- BATTERY COVER
3. How to works
A. Open the USB cover and press the reset button for 3 seconds.
4. How to charge
A. Open the USB cover and connect the USB cable to the USB Connector.
5. Operational description
-After the product is installed on the pin, press reset to start operation. After acquiring the GPS coordinates of the current location, ADVERTISE the current location information through BLE.
– The ADVERTISE signal is received from our brand’s product and displays the position of the pin to help the game during PLAY.
How to Obtain Warranty Service or Other Infomation
USA
Toll-free : 888-251-6058 / Fax :
888-441-5237
Email : support@golfbuddyglobal.com
Address : 10700 Norwalk Blvd. Santa Fe Springs, CA 90670, U.S.A. (USA Office)
Website : www.golfbuddyamerica.com
- If you have any inquiry regarding warranty service, please contact to the shop where you purchased the product
Name of Company : GolfzonDeca Inc.
Product Name : SMART PIN
Model : LP-SMART PIN
FCC ID : 2ALG4LPSMARTPIN
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF
Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.