YZLSM A8 Wireless Guitar System Instruction Manual
- June 16, 2024
- YZLSM
Table of Contents
A8 Wireless Guitar System
Instruction Manual
A8 Wireless Guitar System
Dear Valued Customer,
Hello! Thank you for buying our A8 wireless guitar transmitter and receiver. I
hope you will have good shopping experience with us!
Operation Panel
| 1.Power ON/OFF | Push up and down to switch on/off. |
|---|---|
| 2. Pair Button for Switch Mode | Press and hold the transmitter for 3 seconds |
to switch modes.
3. Transmitter Indicator (TX)| Blue light flashes when not paired. Blue light
is always on when paired. Blue light flashes when the battery is low.
4.Receiver Indicator (RX)| Blue and green light flash alternately when not
paired. The green light is always on when paired for acoustic guitar mode. The
blue light is always on when paired for electric guitar mode. Low battery:
Acoustic mode – green light flashes; Electric mode -blue light flashes.
5. Charging Indicator| Charging shows red light. Battery full: light off.
6. Transmitter Plug| For connecting sound sources with 6.35mm interface. For
example: guitar, bass and other musical instruments. You can use adapters to
connect other devices.
7. Receiver Plug| Used to connect amplifiers, speakers, audios, etc. with
6.35mm interface.
8.DC-in| Use a 5V Micro USB cable to charge.
Packing List
- Transmitter *1
- Receiver *1
- 2-Way Mirco USB Cable *1
- Instruction Manual *1
Steps for Usage
Step 1: Push up to switch on the power.
Step 2: Press both pair button and paired.
(Tips: The transmitter and receiver will be paired automatically when they are
powered on. We have paired them before leaving the factory.)
Step 3: Select mode: Acoustic guitar – Receiver shows green light. Electric
guitar – Receiver shows blue light.
Step 4: Plug in the transmitter first, then the receiver. To avoid noise
caused by metal friction during connection.
PLEASE PAY ATTENTION BEFORE USE
- First thing you should do after receiving the product is to fully charge it. It not only protects the product chip and battery, but also ensures the best first use effect.
- Pair the transmitter and receiver first before plugging them into your devices. If there is a problem with pairing, turn off the power and restart it.
- Green light showing on the receiver works in acoustic guitar mode, and blue light works in electric guitar mode. If blue light works in acoustic guitar mode, it might cause noise. But electric guitar works well in both of the mode. By selecting the appropriate mode, you can avoid problems.
- When using wireless transceivers, try not to use other devices with wireless interference. Wireless transmission only transmits the sound and can not change or amplifies the sound. You can adjust the volume of your guitar or amplifier.
- Please do not use it beyond 30 meters / 98 feet.
- Wireless transmission can not go through the wall, so please do not use it through the wall.
- After 3-4 hours of continuous use, please connect the charger for next use.
- Please use a 5V charger to charge it, otherwise the chip will be damaged.
- When the battery is about to run out, it may not work properly such as transmission problems.
Product Specifications
| Product Name | A8 Wireless Guitar Transmitter & Receiver |
|---|---|
| Case | ABS Environmentally Friendly Material |
| Plug | Gold Plated Copper |
| Color | Black |
| Transmission Frequency | 2.4GHz |
| Frequency Bandwidth | 20Hz-20kHz |
| Transmission Delay | Less Than 4ms |
| Battery Capacity | 300mAh |
| Voltage | 5V |
| Charging Port | Mirco USB |
| Charging Time | 1.5 hours |
| Battery Life | 3-4 hours |
| Transmission Distance | 30 meters/98 feet |
| 6.35mm (1/4″) jack | |
| Product Size (LWH) | 4.31.6*0.6 inches |
| Product Weight | 1.9 oz |
After-Sales
- If the product cannot be used, please apply for a replacement or full refund. And we will take care of it asap. The customer is always #1 for us.
- If you have any question, please feel free to talk to us and give us feedback. This way we can make every effort to understand your issue. Thank you for your support.
May your work go well and all your family be happy!
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>