KPIOK D3386-04-BK Dining Room Light Fixture Over Table Installation Guide

KPIOK D3386-04-BK Dining Room Light Fixture Over Table

Model # D3386-04-BK

MADE IN CHINA

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate or install the product.
• CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation.
• CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
• CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

PREPARATION

1. Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
2. Tools required for assembly (not included): Phillips screwdriver, spanner, wire stripper, safety glasses, electrical tape, ladder.etc.

CARE and MAINTENANCE

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

WARRANTY SERVICES

This product comes with a 2-year warranty. Should you encounter any issues during this period, please don’t hesitate to email us at lampsupport@163.com or directly contact us on Amazon.
To facilitate a faster resolution, we recommend providing your order ID along with any relevant images or videos. This information assists our customer support team in promptly locating your order records and offering you timely help.

1. 1. During the warranty period, we provide replacements or refunds for product failures that occur under normal usage conditions, as outlined in the user manual.

2. However, please note that this warranty does not cover:

3. A. Failures or damages resulting from misuse, unauthorized repairs, modifications, or accidents such as dropping.

4. B. Failures or damages caused by natural disasters like fires, earthquakes, floods, or lightning.

5. C. Failures or damages when the product is used for something other than its intended purpose.

6. D. Failures or damages caused by third-party products that are not associated with this product.

7. a. For iPhone users: Open the Camera app on your iPhone, point it at the QR code, and hold still for a moment. The system will automatically recognize the QR code and display a notification. Click on this notification to watch the installation video.

8. b. For Android users: If your default camera app supports QR code recognition, point it at the QR code and hold still for a moment. The system should recognize the QR code and display a notification. If this doesn’t happen, please use a dedicated QR code scanning app to scan the QR code.

CANOPY INSTALLATION INSTRUCTIONS

After completing the wire connections, carefully tuck all the wires into the junction box. Position the ceiling canopy (C) over the mounting bracket (B),ensuring that the two mounting screws pass through the openings in the canopy (C). Secure the canopy (C) in place by fastening it with the two decorative fasteners (D).

Install the lamp holder caps (L) and the glass shades (M) one by one. Secure them in place using the provided lamp holder fixing rings.
Proceed to install FOUR E26 bulbs of up to 60 Watts, or the CFL or LED equivalent (not included). Make sure the bulbs vou choose are in accordance with the fixture’s soecification.

PACKAGE CONTENTS

LAMPBODY ASSEMBLY INSTRUCTIONS

Before beginning the installation, carefully unpack your new fixture and lay out all the parts in a clear area.

Ensure you do not misplace any small parts necessary for installation.

1. Connect the wires of the two lamp body tubes (K) as depicted in Figure 1.

2. Unscrew the four connector screws (G) and detach the connector cover (H) from the tube connector (J).
   IMPORTANT: Tuck the connected wire into one side of lamp body tube (K). Then, using the tube
   connector (J), connect the two lamp body tubes (K) by aligning and letting the four iron columns of the tube connector (J) pass through the four holes in the lamp body tubes (K).

3. Thread the fixture wires through one side of the wood (I). Then, install the wood (I) by aligning and letting the four iron columns of the tube connector (J) pass through the four holes in the middle of the wood (I).

4. Position the connector cover (H), align the four holes with the four iron columns of the tube connector (J), then secure the connector cover (H) and tube connector (J) using the four connector screws (G).

5. Combine the short tube (E) and long tubes (F) to reach your desired length, being careful to pass the fixture wires through the tubes. IMPORTANT: Detach the metal washers and hex nuts from the two  short tubes (E).

6. Guide the fixture wires through either hole of the ceiling canopy (C), then secure the canopy (C) and two lamp tubes with the metal washers and hex nuts previously removed from the short tubes (E).
   IMPORTANT:
   Install the grounding wire (the bare wire from the accessory kit) as depicted in Figure 4.

LAMPBODY WIRING INSTRUCTIONS

1. Detach the mounting bracket (B) from the ceiling canopy (C) by unscrewing the two decorative fasteners (D). Secure the mounting bracket (B) to the ceiling junction box using the two box screws (A) provided in the accessories kit.
2. Connect with care! Use the wire caps (provided) to connect the black fixture wire with the black (hot) supply wire. Similarly, connect the white fixture wire with the white (neutral) supply wire. Secure these connections by wrapping them with electrical tape.
3. Connect the ground wire from the canopy to the ground wire from the junction box using a wire cap. Enhance this connection’s security by wrapping it with electrical tape. If your house does not have a ground wire, attach the fixture’s ground wire to the green grounding screw marked GND on the mounting bracket (B).
4. Carefully tuck all wires into the junction box.

WARNING: Never connect grounding wire to black or white power supply wires. It is imperative that the outlet box in your home be properly grounded.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>