UGREEN CM106 Bluetooth 5.1 Receiver Audio Adapter User Manual

Bluetooth 5.1 Receiver
Audio Adapter
Model: CM106 I P/N: 40759P

Package Contents

Product Overview

1. Indicator
2. 3.5mm Audio: Car Audio/Headphones
3. 2 RCA Ports: Old Wired Speaker
4. USB-C Power Port: Charger
5. Multi-function Button (MFB)
   Single-click: Play/Pause Music, Reconnecting (In pairing mode)
   Double-click: Force Pairing
   Press and Hold for 3s: Power on/off

Connect to the First Phone

1. Use the included power cable to connect the power supply to the receiver via the USB-C port. The receiver will automatically turn on and enter pairing mode.
2. Connect the 3.5mm port or RCA ports to the speaker.
3. Connect to “UGREEN-40759P” from your phone’s Bluetooth list.
4. Pairing completes when you hear a voice prompt “Pairing successful” and see a slowly flashing blue indicator.
   Note
   If you want to disconnect it, you can turn off the Bluetooth or turn off the receiver.
   It will automatically reconnect to your phone next time after turning on Bluetooth or powering on this unit.

Connect to the Second Phone

1. Complete the pairing with the 1st phone (tablet/computer).
2. Double-click the button, and the indicator will flash blue rapidly to indicate that it has entered pairing mode. During this time, the first phone will automatically disconnect from the product.
3. Connect to “UGREEN-40759P” from your second phone’s Bluetooth list. Pairing completes when you hear a voice prompt “Pairing successful” and see a slowly flashing blue indicator.
4. Connect to “UGREEN-40759P” from your first phone’s paired device list.

Note

• Only one phone’s audio can be played at a time.
• This receiver can save up to 5 paired devices.

Factory Reset

Press and hold the button for 10s, the receiver will turn off after the blue indicator turns on for 5s. At this time, resetting is completed and the receiver will automatically enter pairing mode when you turn it on.

Notes

• Please use a power supply that meets the requirements of the product (5V 1A) for charging, otherwise it may cause fire or damage to the product.
• Do not use around strong magnetic fields.
• Do not expose to liquids, moist or extreme temperatures.
• Do not dismantle, impact or crush.
• Do not clean this product with strong chemicals or detergents.
• Keep out of reach of children.
• Do not place this product in direct sunlight.
• Please store this product in dry, clean and moderate climates if you will not use this unit for a long time.

Specifications

The data are measured by UGREEN lab but may vary based on specific circumstances.

FCC Statement

**This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference  that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC NOTE:** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Important WEEE Information
This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.Disposing of this product correctly will help save valuable resources and prevent any  potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU).If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

GB Declaration of Conformity
****Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio
Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn more
about the GB Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
UK REP: Acumen International Business Consultancy Limited
Add: 94 Ock Street, Abingdon, OX14 5DH, UK

EU Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. Learn more about the EU Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
Ugreen Group Limited
Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
EU REP: Ugreen Group GmbH
Add: Mannheimer Str. 13, 30880 Laatzen, Germany

IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference； (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.

Manuale utente
PAP 22
Raccolta carta

References

• Download – UGREEN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>