Thomas Betts 58265BBS Copper Two Hole Lug Compression Connector Owner’s Manual

: June 16, 2024
: Thomas Betts

Table of Contents

Thomas Betts 58265BBS Copper Two Hole Lug Compression Connector
Product Information
Product Usage Instructions
North American Specifications (UNSPSC)
European Specifications (ETIM)
Packaging
Contact Information
FAQ’s
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Thomas Betts 58265BBS Copper Two Hole Lug Compression Connector

Product Information

Specifications

Catalog Number: 58265BBS
Product ID: 7TAH007990R1767
UPC Number: 78620989322
Status: C
Copper Two-Hole Lug, Standard Barrel – Bell Shaped End, Bottom Stacking, Peep Hole
Max Voltage Rating: 35kV
Wire Size: 4/0 Flex
Bolt Size: 1/2 Inch
Hole Spacing: 1-3/4 Inch
Tin Plated
Die Code: 62
Die Color Code: Yellow

Product Usage Instructions

Step 1: Gather the necessary tools and materials
Before starting the installation, make sure you have the following tools and materials:
- Wire cutters/strippers
- Wrench or socket set (1/2 inch)
- Electrical tape
- Copper Two-Hole Lug (Catalog Number: 58265BBS)
Step 2: Prepare the wires
Use the wire cutters/strippers to strip the insulation from the end of the wire. Make sure to strip enough insulation to fit into the lug holes.
Step 3: Insert the wires into the lug
Insert the stripped end of the wire into the lug holes. Make sure the wire is fully inserted and that there is good contact between the wire and the lug.
Step 4: Secure the lug
Use a wrench or socket set to tighten the bolt on the lug. Make sure it is securely tightened to ensure a proper electrical connection.
Step 5: Insulate the connection
Use electrical tape to wrap around the lug and the wire connection. This will provide insulation and protect against any potential electrical hazards.
Step 6: Verify the installation
Double-check all connections and make sure everything is properly secured. Use a multimeter to test for continuity and ensure there are no loose connections.
Step 7: Repeat for additional connections (if necessary)
If you have multiple wires to connect, repeat steps 2-6 for each additional connection.
Step 8: Final inspection
Once all connections are made, visually inspect the installation to ensure everything is in order. Check for any signs of damage or loose connections.

Copper Two-Hole Lug, Standard Barrel – Bell Shaped End, Bottom Stacking, Peep Hole, Max 35kV, Wire Size 4/0 Flex, 1/2 Inch Bolt Size, 1-3/4 Inch Hole Spacing, Tin Plated, Die Code 62, Die Color Code Yellow

North American Specifications (UNSPSC)

UNSPSC : 39121405 Cable or wire lug
IGCC : 4532 Cable or wire lug
Type : Standard Barrel – Bell Shaped End
Cable : Size 4/0 AWG
Stud Size : 1/2 in
Number Of Holes : 2
Voltage Rating : 35 kV
Insulation : None
Material :Copper
Color : Yellow

European Specifications (ETIM)

ETIM : EC001051 Tube cable lug for copper conductors
Connecting angle : Straight
Slender flange model: N
Insulated: N
With sight-hole: Y
Material : Copper
Surface protection : Tinned
Number of fixing holes : 2

Packaging

Inner Quantity : 10
Inner Dimensions (inches) : 5×4.5×3
Outer Quantity : 100
Outer Dimensions ( inches ): 23.87×10.63×3.43
Weight : 31 lbs. per 100

Contact Information

For further technical assistance, please contact us…

ABB Installation Products
USA 860 Ridge Lake Blvd. Memphis, TN 38120 www.tnb.com

Address : ABB Installation Products Technical Support MS 3B-50 860 Ridge Lake Blvd. Memphis, TN 38120
Hours : 7AM – 6PM CDT Monday-Friday
Phone : 888-862-3289
Fax : 901-252-1321
Email : techsupport@tnb.com

Downloaded from Arrow.com.