Thomas Betts 54804 Copper Two Way Splice Owner’s Manual
- June 16, 2024
- Thomas Betts
Table of Contents
Thomas Betts 54804 Copper Two Way Splice
Product Information
Specifications
- Catalog Number: 54804
- Product ID: 7TAH007510R0000
- UPC Number: 78621054804
- EAN Number: 05414363110712
- Status: A
- Wire Size: #8 AWG
- Length: 1.75 Inches
- Diameter: 0.27 Inch
- Tin Plated
- Die Code: 21
- Die Color Code: Red
- Voltage Rating: 600 V
- Conductor Range: 8-8
- Material: Copper
- Finish: Tin-Plated
- Color: Red
- Insulation: None
Product Usage Instructions
-
Step 1: Preparation
Before using the Copper Two-Way Splice, ensure that you have the necessary tools and equipment for the installation. These may include wire cutters, crimping tools, and safety gloves. -
Step 2: Wire Preparation
Prepare the wires that need to be spliced by stripping off the appropriate amount of insulation from each end. Ensure that the stripped portion is clean and free from any debris or oxidation. -
Step 3: Insertion
Insert the stripped ends of the wires into the Copper Two-Way Splice. Ensure that the wires are fully inserted and make good contact with the splice connector. -
Step 4: Crimping
Using a suitable crimping tool, crimp the splice connector to secure the wires in place. Apply sufficient pressure to create a strong and reliable connection. -
Step 5: Insulation
Insulate the spliced area using appropriate insulation materials. This will ensure electrical safety and protect the connection from external elements. -
Step 6: Testing
After completing the splice, perform electrical testing to verify the integrity of the connection. Use appropriate testing equipment to check for continuity and insulation resistance.
Frequently Asked Questions (FAQ)
-
Q: What wire size is compatible with this splice?
A: The Copper Two-Way Splice is compatible with wire size #8 AWG. -
Q: What is the maximum voltage rating for this splice?
A: The maximum voltage rating for this splice is 600 V. -
Q: Does this splice provide insulation?
A: No, this splice does not provide insulation. It is recommended to insulate the spliced area using appropriate insulation materials. -
Q: Are there any specific tools required for installation?
A: Yes, you will need wire cutters, crimping tools, and safety gloves for the installation process. -
Q: Where can I find technical support for this product?
A: For further technical assistance, please contact ABB Installation Products Technical Support at: ABB Installation Products Technical Support MS 3B-50 860 Ridge Lake Blvd. Memphis, TN 38120- Hours: 7AM – 6PM CDT Monday-Friday
- Phone: 888-862-3289
- Fax: 901-252-1321
- Email: [email protected]
Representative
Line Art
- Catalog Number: 54804
- Product ID : 7TAH007510R0000
- UPC Number: 78621054804
- EAN Number: 05414363110712
- Status : A
- Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #8 AWG, Length 1.75 Inches, Diameter 0.27 Inch, Tin Plated, Die Code 21, Die Color Code Red
- Two-way connectors provide high pullout values, are easy to insulate and provide a low-resistance connection of high quality and low installed cost.
For further technical assistance, please contact us.
- ABB Installation Products Technical Support MS 3B-50
- 860 Ridge Lake Blvd.
- Memphis, TN 38120
- Hours: 7AM – 6PM CDT Monday-Friday
- Phone: 888-862-3289
- Fax: 901-252-1321
- Email:[email protected]
- ABB Installation Products
- USA 860 Ridge Lake Blvd. Memphis, TN 38120
- www.tnb.com