ELENOSE 2AQ9RA7 Air Conduction Wireless Earphone User Manual

ELENOSE 2AQ9RA7 Air Conduction Wireless Earphone

Product Information

Specifications

• Product Name: Air-conduction wireless earphone
• Button Functions:

1. Power On/Pause/Play/Answer Call/End Call/Reject Call/Next/Voice Assistant
2. Power Off/Previous/Enable Internal Microphone
3. LED Indicator
4. Stem Microphone
5. Internal Microphone
6. Magnetic Charging Port
7. PC Dongle
8. Phone Dongle

Product Usage Instructions

Power On/Off

1. In the OFF state, press and hold the volume+ button for 3 seconds.
2. The white LED indicator will flash, and a voice prompt will say “Power On”.

To power off the headphone, follow these steps:

1. In the ON state, press and hold the volume- button for 7 seconds.
2. The white LED indicator will flash briefly, and a voice prompt will say “Power Off”.

Bluetooth Pairing

To connect to a device via Bluetooth, follow these steps:

1. Make sure the headphone is in the powered-off state.
2. Press and hold the volume+ button for 3 seconds.
3. The headphones will power on and enter pairing mode.
4. The white LED indicator will rapidly flash, and the headphone will give a pairing prompt.
5. On your device (smartphone, tablet, etc.), search for available Bluetooth devices and select “A7”.
6. The headphones will establish the Bluetooth connection.

Playback Control

To control playback while connected via Bluetooth:

• To pause/play: Single click the volume+ button.
• To activate Siri/Voice Assistant: Double-click the volume+ button.

Call Functions

To answer/end a call:

• To answer: Single click the volume+ button.
• To reject: Press and hold the volume+ button for 2 seconds.
• To end: Single click the volume+ button during a call.

Mute Mode and Internal Mic Mode

To activate mute mode during a call:

• Remove the mic stem while on a call.

To temporarily switch to an internal microphone:

• After removing the mic stem, double-click the volume- button to activate the internal mic mode.
• This will switch to the internal microphone for voice transmission.

Game Mode (Dongle Mode)

To enter game mode:

• Insert the dongle (PC/phone) into the appropriate port.
• The headphones will automatically connect to the dongle and enter the game mode.

Charging

• Use the magnetic charging cable.
• Bring the charging end of the cable close to the charging position on the headphones.
• The cable will automatically magnetically attach and start charging.
• During charging, the white LED indicator will be on.
• When charging is complete, the LED indicator will turn off.

FAQ

How do I clear pairing information?

• In pairing mode, press and hold the volume- button for 8 seconds.
• The white LED will be on for 1 second, and then the headphones will enter pairing mode again.

Can I use the headphones with OPPO or VIVO devices?

• Yes, the headphones are compatible with OPPO and VIVO devices. Simply connect the appropriate dongle (PC/phone) and follow the instructions.

Overview of button functions

1. Power On/Pause/Play/Answer Call/End Call/Reject Call/Next /Voice Assistant
2. Power Off/Previous /Enable Internal Microphone
3. LED Indicator
4. Stem Microphone
5. Internal Microphone
6. Magnetic Charging Port
7. PC Dongle
8. Phone Dongle

Control Instructions

• Power On: When the headphone is OFF, press and hold the volume+ button for 3 seconds to power on. The white LED indicator will flash, accompanied by a voice prompt saying “Power On.
• Power Off: When the headphones are ON, press and hold the Volume – button for 7 seconds to power off. The white LED indicator will flash briefly to power off, accompanied by a voice prompt saying “Power Off
• Connect BT: In the powered-off state, press and hold the volume + button for 3 seconds.
• The headphones will power on and automatically enter pairing mode. The white LED indicator will rapidly flash, and the headphone will give a pairing prompt.
• Search on your device (smartphone, tablet, etc.) and select “A7” to establish the Bluetooth connection.
• Connected successfully: When the headphone is successfully connected to the device, a white LED will flash every 5 seconds with reminding tone: Connected;
• Pause/Play: While connected via Bluetooth and in music playback mode, a single click on the volume + button will pause the playback, and another single click will resume playback.
• Voice Assistant/Siri: While connected via Bluetooth, double-click the volume + button to enter the voice mode/Siri, and double-click again to exit.
• Answer/End Call: When there is an incoming call, single click on the volume button to answer the call, or press and hold the volume + button for 2 seconds to reject the call.
• During a call, single click on the volume + button to end the call.
• Mute Mode (Remove Mic   Stem): During a call with the mic stem attached, removing the mic stem will automatically activate the mute mode. Reattaching the mic stem will automatically switch back to mic mode.
• Enable Internal Mic Mode: After removing the mic stem, if you need to temporarily use the internal microphone, double-click the volume – button to activate the internal mic mode and switch to the internal mic for voice transmission. Reattaching the mic stem will automatically switch back to the mic stem mode.
• Game Mode (Dongle) Mode: Insert the dongle (PC/phone) and it will automatically connect to the headphone, and enter the game mode.
• Clear Pairing Information: In pairing mode, press and hold the volume – button for 8 seconds to clear the pairing information. The white LED will be ON for 1 second, and then enter pairing mode again.
• Charging: When using the magnetic charging cable, bring the charging end of the cable close to the charging position on the headphone. It will automatically magnetically attach and start charging. During charging, the white LED indicator will be on. When charging is complete, the LED indicator will be off.

How to wear

• Hang the headphone behind your neck with both speakers clinging to your cheekbones.
• After that, adjust it until you feel comfortable.

Specifications

• Music Playback   Time: 6 hours (at 70% volume)
• Standby Time: 20 days
• Charging Time: 2 hours
• BT Version: 5.3
• Speaker Impedance: 16Ω±3
• Microphone Sensitivity: -42±2db
• Product Weight: 24.5g
• Connection Distance: 15 meters
• Charging Voltage/Current: 5V/0.5A
• Please wear the speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
• Listening to music for an excessive long time may make you feel uncomfortable, please try to use a medium volume instead of a big one.
• No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
• Do not throw, press the headphone or put it in the water.
• Keep the headphone away from fire, water and high voltage devices.
• It is not for children’s use as it contains small parts.
• Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
• If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>