NOEVSBIG LED Desk Lamp Installation Guide
- June 16, 2024
- NOEVSBIG
Table of Contents
NOEVSBIG LED Desk Lamp
How to Install the Lamp?
- Pull the wire back until the lamp head post can be inserted into the locking place.
Step-by-Step Instructions
- Description: A person’s hands are shown pulling a wire attached to a lamp post. Action: The hands pull the wire in a direction away from the post, as indicated by two orange arrows.
- Description: The lamp post is aligned with the arm of the lamp. Action: The hands guide the post towards a slot on the lamp arm, with orange arrows showing the direction of movement.
- Description: The wire is still being held by one hand, while the other hand supports the lamp arm. Action: The hand holding the wire continues to pull it back, as indicated by the orange arrows, to allow the post to align properly with the locking place.
- Description: The lamp post is now inserted into the locking place on the lamp arm. Action: No action is shown, but the post appears to be locked in place, completing the installation.
FAQ
- What should I do if the lamp post doesn’t fit into the locking place?
- Ensure that you have pulled the wire back sufficiently for the post to align with the locking place. If it still doesn’t fit, check for any obstructions or misalignments and try again.
- Is it necessary to pull the wire throughout the installation process?
- Yes, pulling the wire back is essential to allow the lamp head post to be inserted into the locking place properly.
- What should I do after inserting the lamp post into the locking place?
- Once the lamp post is inserted, ensure that it is securely locked in place. You may then release the wire and proceed to test the lamp’s functionality.
Using Instructions
How to install the lamp?
- Pull the wire back until the lamp head post can be inserted into the locking place.
Read User Manual Online (PDF format)
Loading......