HFM 230720 Adjustable Cabinet Door Punch Instructions

HFM 230720 Adjustable Cabinet Door Punch

Product Information

• Specifications
  • Model: Adjustable cabinet door punch
  • Net product weight: 188.4g
  • Gross product weight: 243.3g
  • Product size: 30mm
  • Inner box size: 2555271mm
• Product Structure
  • The newly upgraded adjustable cabinet door T-punch features:
  • Horizontal positioning ruler (A)
  • Longitudinal scale sliding ruler (B)
  • Adjustable retaining nut (E)
  • 4mm drill bit (F)
  • Screw (D)
  • Slide the support plate lengthwise (C)
  • Hexagon wrench (G)
• Product Installation
  • Loosen the nut and remove the screw fitting (see FIGURE 1).
  • Loosen the fixing screws counterclockwise (see FIGURE 2).
  • Install the screw (see FIGURE 3) and put the shims on (see FIGURE 4).
  • Install the nut, adjust it in the right position, and tighten the nut (see FIGURE 5).
  • Install the longitudinal sliding support plate and tighten the screws to complete the installation (see FIGURE 6).
• How to Use
  • Find the centerline of the board (see FIGURE 1).
  • Align the locator pointer with the centerline (see FIGURE 2).
  • Move the horizontal positioning ruler and tighten the nut (see FIGURE 3).
  • Adjust the position after twisting the nut and fix it in place (see FIGURE 4).
  • According to the specifications of the handle, carry out the corresponding drilling sleeve hole opening (see FIGURE 5).
  • Install the handle (see FIGURE 6).
• Product Packaging
  • The product comes packaged in a box with the following dimensions:
  • Box size: 2555271mm

FAQS

• Q: What is the weight of the product?
• A: The net product weight is 188.4g and the gross product weight is 243.3g.
• Q: What is included in the product package?
• A: The package includes:
  • Horizontal positioning ruler*1
  • Longitudinal scale sliding ruler*2
  • Slide the support plate lengthwise *1
  • Hexagon wrench*1
  • Screw * 4
  • Adjustable retaining nut *1
  • 4mm drill bit*2
• Q: How do I install the product?
• A: To install the product, follow these steps:
  • Loosen the nut and remove the screw fitting.
  • Loosen the fixing screws counterclockwise.
  • Install the screw and put the shims on.
  • Install the nut, adjust it in the right position, and tighten the nut.
  • Install the longitudinal sliding support plate and tighten the screws to complete the installation.
• Q: How do I use the product?
• A: To use the product, follow these steps:
  • Find the centerline of the board.
  • Align the locator pointer with the centerline.
  • Move the horizontal positioning ruler and tighten the nut.
  • Adjust the position after twisting the nut and fix it in place.
  • According to the specifications of the handle, carry out the corresponding drilling sleeve hole opening.
  • Install the handle.

Product Accessories

• model: Adjustable cabinet door punch
• Net product weight: 188.4g
• Gross product weight: 243.3g
• product size: See the size shown below
• Inner box size: 2555271mm

Product Structure

Newly upgraded adjustable cabinet door T-punch.Porous measurement, Seamless fit, Rugged, Accurate positioning and fast drilling

• (A). Horizontal positioning ruler*1
• (B). Longitudinal scale sliding ruler*2
• (C). Slide the support plate lengthwise *1
• (G). Hexagon wrench*1
• (D). screw * 4
• (E). Adjustable retaining nut *1
• (F). 4mm drill bit*2

Product installation

1. Loosen the nut and remove the screw fitting. （FIGURE 1）
2. Loosen the fixing screws counterclockwise. （FIGURE 2）
3. Install the screw（FIGURE 3）, Put the shims on（FIGURE 4）.
4. Install the nut, adjust it in the right position, and tighten the nut. （FIGURE 5）
5. Install the longitudinal sliding support plate and tighten the screws to complete the installation.（FIGURE 6）

How to use

1. Find the centerline of the board. (FIGURE 1)
2. Align the locator pointer with the centerline. (FIGURE 2)
3. Dolly moves the Horizontal positioning ruler and tightens the nut. (FIGURE 3) .
4. Adjust position after twisting the nut, fixed position. (FIGURE 4) .
5. According to the specifications of the handle, carry out the corresponding drilling sleeve hole opening.(FIGURE 5) .
6. Install the handle. （FIGURE 6）

Product packaging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>