HFM PHJK001 Pocket Hole Jig Kit Instruction Manual

HFM PHJK001 Pocket Hole Jig Kit

Product accessories

1. Bit, with ring*1
2. Bit, without ring*1
3. Product body*1
4. Screws*10
5. Plug*10
6. Wrench*1
7. For approval*1

Product structure

SPECIFICATION

Hole Angle: 15°
Material: Aluminum Alloy
Drill Bit Material: High Speed Steel
Suitable Plank Thickness: 0.47”-1.77”(12-45mm)
Package List: Pocket Hole Jig x 1, Drill bit x 2, Screwdriver x 1,
Pocket Hole Screws x 10, Star Screw x 1,
Pocket Hole Plugs x 10, Limit Ring x 1
Drill Sleeve Material: Steel

Product dimensions

Installation steps

1. Take out the product. (FIGURE 1)

2. Loosen the screw press. (FIGURE 2)
   

3. Punch the required height adjustment. (FIGURE 3)

4. Drill point is on the floor in front of the raised 1 mm or so, and lock the adjusting ring. (FIGURE 4)

5. Into the wood and locking screw press. (FIGURE 5）

6. Will drill into the drill tools, lock bit can begin drilling operation. (FIGURE 6)

Documents / Resources

| HFM PHJK001 Pocket Hole Jig Kit [pdf] Instruction Manual
PHJK001 Pocket Hole Jig Kit, PHJK001, Pocket Hole Jig Kit, Hole Jig Kit, Jig Kit
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>