FSTENPUS AJ220b Flame Speaker User Manual

FSTENPUS AJ220b Flame Speaker

Product Information

Specifications

• Model: [Product Model]
• Dimensions: [Product Dimensions]
• Weight: [Product Weight]
• Power Source: [Power Source]
• Frequency Range: [Frequency Range]
• Transmitter Type: [Transmitter Type]
• Radiation Exposure Limits: FCC-compliant

Product Usage Instructions

Installation

To install the product, follow these steps:

1. Select a suitable location for the product, ensuring it is away from any other antennas or transmitters.
2. Connect the product to the power source using the provided power cord.
3. Ensure all cables and connections are securely in place.

Connecting to Devices

To connect the product to your devices, please follow these instructions:

1. Identify the input/output ports on your devices.
2. Using the appropriate cables, connect the product to the corresponding ports on your devices.
3. Ensure all connections are secure and properly inserted.

Powering On

To power on the product, please do the following:

1. Ensure the product is properly connected to the power source.
2. Locate the power button (if applicable) and press it to turn on the product.
3. Wait for the product to initialize and establish a connection.

Adjusting Settings

The product may have various settings that can be adjusted. To access and modify these settings, follow these steps:

1. Locate the settings menu on the product or the remote control (if applicable).
2. Use the navigation buttons to navigate through the settings options.
3. Select the desired setting and use the adjustment buttons to modify it.
4. Save the changes and exit the settings menu.

Troubleshooting

If you encounter any issues with the product, refer to the troubleshooting section of the user manual or contact our customer support for assistance.

FAQ

• Q: What should I do if my product is not turning on?
• A: Make sure the product is properly connected to the power source and try pressing the power button again. If the issue persists, check the power outlet and consider contacting customer support for further assistance.
• Q: Can I connect the product to multiple devices simultaneously?
• A: Depending on the product’s specifications, it may support multiple device connections. Refer to the user manual or product documentation for more information on simultaneous device connections.

Product Information

• Flame lamp
• Yellow light
• White light
• Wireless speaker function
• Can rotate a variety of forms
• Support TWS any two speakers in a series stereo output
• More portable for outdoor use with built-in high-capacity rechargeable lithium battery
• 1P65 dustproof and waterproof

Technical Parameters

Lighting Use

• Turn the light switch knob clockwise and enter the flame lamp mode after hearing the “clomp” sound;
• Continue to rotate the knob into the warm yellow light long bright mode, and rotate to adjust the brightness of the warm yellow light;
• Then rotate to yellow-white alternating mode, yellow light and white light up at the same time.
• Then turn the knob to enter the white light long bright mode, rotate to adjust the brightness of the white light, and finally stop at the brightest white light mode.
• Turn the knob counterclockwise until you hear the “clomp” sound and turn off the light.

Single Speaker Use

• Long press the button to turn on the speaker and with a beep. The green indicator light flashes slowly, search wireless name” AJ220″ on the phone. After the connection is successful, the indicator light will be always on and accompanied by a beep.
• Long press the button to switch to the previous song, short press to lower the volume.
• Long press the button to the next song, short press to increase the volume. When the volume reaches the maximum, there will be a beep.
• Hold down the button at the same time to cancel the connection with your phone.
• Short press the button to pause or resume playing.

TWS Doble Speaker Use

• Method 1: Long press the button at the same time to turn on the two speakers, and double press the ( button of any speaker to enter the pairing. There will be a beep “Ture Wireless Stereo Pair Mode” After pairing is successful, the indicator light will be on and there will be a beep” Pair Successful”
• Method 2: If one speaker is successfully connected to the mobile phone and to connect another one to form left and right channels, just turn on the other speaker power, and then double press the ( button of the connected speaker. There will be a beep “Ture Wireless Stereo Pair Mode” to wait for the two speakers to pair automatically. After the pairing is successful, there will be a beep” Pair Successful”
• Be sure to double-press the button on the speaker that is first paired to the mobile phone, otherwise, the pairing will not be successful.
• When two speakers are paired successfully. Only one search name will be displayed on the phone. After the connection is successful, the sound will come out from both speakers at the same time.
• If only want to use a single speaker, press the and button to cancel the combination.

Charging Instruction

Plug the Type-C cable into the USB port for charging, the red light will be on when charging, and it will go out when fully charged.

Attention

• Please don’t charge the speaker under the temperature of 0°C-40°C.
• Not recommended for charging while using.
• Please pull out the USB cable after a full charge.
• Please don’t charge the speaker in high-humidity situations.

Rotational deformation

• Pull up the small hand ring on the top cover and rotate the speaker body to operate, either the speaker or the lamp.

Warranty Card

Applicable for

• Since the buying date, the user has enjoyed one year of free repair services under normal use. After one year, will be charged according to each part cost.
• In case the change part, will be charged according to our company’s part cost list.
• The following situations without free repair services in the warranty period
  • Damage caused by natural earthquakes, rat disasters, and abnormal use.
  • Damage is caused by transportation, falls, and improper storage.
  • Consumable components, such as spare parts, batteries, light bulbs, etc.
  • Warranty information records are not complete, no purchase date, no buying shop seal, etc.
  • Featured using environment, such as humidity, sulphur area, high salty and on board, etc, easy corrosion area.
  • Using not according to the instructions.
  • Products sold by special agreement.
• When returning to the factory for repair, the user should make sure the product is packed properly to avoid any damage during transportation.
• Factory is not responsible for the damages caused by the users themselves improper disassembling.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>