geniani LAVA 3 Heating Pad for Neck and Shoulders User Manual

: June 16, 2024
: geniani

Table of Contents

geniani LAVA 3 Heating Pad for Neck and Shoulders
CONTROLLER INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS DO NOT DESTROY
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
SPECIFICATION
**WARRANTY
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

geniani LAVA 3 Heating Pad for Neck and Shoulders

CONTROLLER INSTRUCTION

FOR PERSONAL USE ONLY
Find Us Online Search for @GenianiProducts • #Geniani on social media for wellness tips, special deals, giveaways, inspiration, and more.

QUESTIONS OR CONCERNS? PLEASE CONTACT US

1 833-780-5026 Mon-Fri, 9:00 am – 5:00 pm PST/PDT or at info@geniani.com

ON/OFF
The digital controller allows you to turn the unit ON or OFF, simply by pressing the button @)

MEMORY FUNCTION
The default setting for the Lava Heating Wrap is 30 minutes for the switch-off timer and 48°C (118.4°F) for the temperature level. The controller remembers the temperature and time that were set last time. When the heating wrap turns on, it will have the parameters of previous use.

HEAT SETTINGS
The Lava Heating Wrap has six levels of temperature: 40°C ( 104° F ), 44°C (lll.2° F ), 48°C (118.4° F ), 52°C (125.6° F ), 56°C {132.8° F ), 60°C ( 140° F ). Each has a light indicator from the left to right on the controller. Press the”+” button and the indicator lights will flash from left to right and stop at the chosen temperature. If the temperature needs to be decreased, press the button”-”

AUTOMATIC SWITCH-OFF
The digital controller allows setting the timer automatically to switch off. The Lava Heating Wrap has four switch-off settings: 30 minutes, 60 minutes, 90 minutes, and 120 minutes. Simply press the suitable interval to set up the timer. Once the timer counts itself down, the heating wrap will automatically switch off. The default setting of the switch-off timer is 30 minutes.

IMPORTANT NOTE
Always unplug this device when not in use.

IMPORTANT SAFETY INSTRUCTIONS DO NOT DESTROY

DANGER
Non-observance of the following notes may result in personal injury or material damage (electric shock, skin burns, fire).

Do not sit on the heating wrap
Do not use it while sleeping. Never position a heating wrap underneath the body
Do not bleach
Do not iron
Do not fold the heating wrap
Not for children under 3 years of age
Do not tumble dry
Do not dry clean
Cold hand wash or gentle cold machine wash
Avoid hot surfaces
Dispose of packaging in an environmentally friendly manner

DANGER! To reduce the risk of burns, electric shock, and fire, this product must be used in accordance with the following instructions

Do not use it while sleeping
Do not use it on an infant.
This pad is not to be used by or on an invalid, sleeping, or unconscious person, or a person with poor blood circulation unless carefully attended.
Do not use on areas of insensitive skin.
Burns can occur regardless of the control setting, check the skin under the pad frequently
Never use a pad without a cover in place (all household pads if provided with a supplementary cover).
Do not use pins or other metallic means to fasten this pad in place.
Do not sit on or crush the pad – avoid sharp folds.
Never pull this pad by the supply cord.
Do not use the cord as a handle.
Carefully examine the inner cover before each use. discard the pad if the inner covering shows any signs of deterioration (all household pads if provided with supplementary cover).
Loop the cord loosely when storing, tight wrapping may damage the cord and internal parts.
Read and follow all instructions on the box or pack with a pad before using.

Thank you for purchasing Geniani heating wrap, designed to provide soothing heat therapy to areas of stress in the neck, shoulders, and upper back.

Ensure this pad is used only on a standard 120V outlet.
POLARIZED PLUG
This heating wrap has a polarized plug (one blade is wider than the other) as a safety feature (Figure 1). This plug fits into a polarized outlet only in one way. If the plug does not fully fit into the outlet, reverse the plug. If it still does not fit, contact aelectrician.

HOW TO USE YOUR HEATING WRAP
The wrap connector must be connected to the heating wrap connector before plugging the unit into an electrical outlet (Figure 2)

OPERATING INSTRUCTIONS

NOTE: If the unit does not turn on when you press the power button, make sure the control connector is securely plugged into the heating wrap connector.

Neck & Shoulders Heating Wrap Lava is designed to stay in place throughout the entire treatment session. The extra-soft fleece fiber surface and the breathable material make it especially comfortable. Use for just 20 minutes daily (or as recommended by a doctor) to help temporarily reduce pain and muscle tension.

CARE AND MAINTENANCE

Do not dry clean.
Do not spray this device with any cleaner, alcohol-based solvent, or any other chemical.
Do not bleach, wring, tumble dry, or iron.
Clean with soft detergent or foam soap.
Wash by hand or as follows in an automatic washer using slow agitation and normal spin speed: Fill the washer with warm water. Add a minimum amount of all-purpose detergent, agitate to dissolve, and measure the heating pad before washing. Add a heating pad and soak for five minutes. Agitate for two minutes. Spin. Fill for cool rinse, agitate for one minute then spin. Dry in an automatic dryer on high heat, for five minutes only, or line dry. Remove the damp heating pad from the dryer, block it to its original size, and drape it to finish drying. Do not iron your heating pad.

SPECIFICATION

Size: 22″ X 24″
Model Number: H31Nl
Voltage: 1 20V
Frequency: 60 Hz
Wattage: 75W
Material: Flannel fleece top and bottom
Heat Settings: 6
Auto Shut Off Timer: 30, 60, 90, 120 minutes
Cord: 9 ft.

For more information, visit our website at www.geniani.com

**WARRANTY

**

The manufacturer does not bear any responsibilities when personal injury or property loss is caused due to the following reasons:

Damage to the product due to improper use or misuse of the product.
Alteration, change, and maintenance of the product with other equipment without following the instructions provided by the manufacturer.
After verification, if the defects are due to improper operation during the transportation of the product.
After verification, if the problem or dispute is caused by the quality specification or the performance of the parts and components that were produced by other manufacturers.
In case of operation, repair, or maintenance of the unit without following the manual’s instructions or related regulations.
If the damage is caused by natural calamities, improper environmental use, or force majeure.

CUSTOMER SUPPORT

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team *Please have your order invoice and order ID ready before contacting Customer Support.

E-mail:info@geniani.com
Phone : 1 833-780-5026 Support
Hours : Mon-Fri, 9:00 am-5:00 pm PST/PDT
We are proud of our exquisite customer support service, treating everyone like they’re part of our family. For more information, please visit our website www.geniani.com Contact us anytime!GENIANI 800 Progress Center Ct, Ste 100, Lawrenceville, GA 30043, United States Phone: 1 833-780-5026

EXTEND YOUR WARRANTY BY ONE YEAR
Register your product within 14 days of purchase at www.geniani/warranty to extend your one-year warranty by an additional 1 year.