atom AT9020 TRI 10W LED Adjustable Downlight with Dimmable Driver Instruction Manual
- June 16, 2024
- ATOM
Table of Contents
atom AT9020 TRI 10W LED Adjustable Downlight with Dimmable Driver
Specifications
- Order code: 11833
- Description: 10W Tilt Adjustable LED downlight with dimmable driver – Tri-CCT – White
- Driver Power: 10 W
- Driver Type: Dimmable (Phase cut)
- Item Code: AT9020/WH/TRI
- Total System Efficiency: 104 lm/W
- Adjustability: Adjustable
- Body Material: Aluminium
- Diffuser Material: PMMA
- Product Finish: Powdercoated White
- Fitting Colour: White
- IC Rating: IC Recessed
- Installation Type: IP20
- Electrical Rating: Class II
- Input Frequency: 50 Hz
- Input voltage: 230Vac (In Australia: 216Vac – 253Vac or 240V +6%)
- Maximum Wattage: 10 W
- Power Factor: 0.9
- Switch Type: Inline
- Working Temp Range: Not specified
- Beam Angle: Not specified
- CCT Configuration: Warm White (3000K), Cool White (4000K), DayLight (5700K)
- Colour Rendering Index (CRI): Not specified
- Lamp/LED Current: Not specified
- Lamp/LED voltage: Not specified
- LED Lifetime: >54,000 hrs
- TM-21 Test Hours: 9000 hrs
- Dimmable Driver Included: Yes
- Integrated Driver: Yes
- Driver Mode: No
- Driver Type: Constant Current Dimmable (Phase cut)
- Flex & Plug or Lead Length: 600 mm
- Wiring Type: Re-wireable Flex & Plug (2 pin)
- Domestic Use Warranty: 3 RTB (Total 3 Years)
- VIP Warranty: 2 Onsite, 3 RTB (Total 5 Years)
Product Usage Instructions
Installation
- Ensure the power is turned off before installation.
- Select a suitable location for the downlight.
- Make a cutout of 95-100 mm in diameter.
- Insert the downlight into the cutout.
- Connect the wiring according to the provided wiring type.
- Turn on the power and test the downlight.
Adjusting the Downlight
The AT9020 TRI downlight is adjustable, allowing you to tilt it to your desired angle. Follow the steps below to adjust the downlight:
- Gently hold the downlight by its edges.
- Rotate the downlight in the desired direction.
- Release the downlight to lock it in place.
Dimming
The AT9020 TRI downlight comes with a dimmable driver that allows you to
adjust the brightness level. Follow the steps below to dim the downlight:
- Ensure your switch is compatible with phase-cut dimming.
- Turn on the downlight at full brightness using the switch.
- Gradually reduce the brightness by adjusting the switch.
Instruction
10W LED Adjustable downlight with dimmable driver
Tri-colour
- Energy-efficient LED
- Adjustable Gimbal tilt design
- Easy to install
- Phase-cut dimmable
- Tri-CCT selectable
ORDERING INFORMATION
EFFICIENCIES
Total System Efficiency 104 lm/W The performance of each component of a luminaire is demonstrated through its efficiencies, which together determine the total system efficiency of the product. The output of the LED chip is first multiplied by the optical and thermal efficiencies to calculate the Luminaire efficiency. However, this calculation does not consider the driver efficiency. To determine the overall efficiency of the system, the Luminaire efficiency must be multiplied by the driver efficiency, which accounts for all losses in the system.
MECHANICAL
ELECTRICAL
LAMP
LED LIFETIME
-
LED Lifetime >54,000 hrs
This is the Reported LED Lifetime in Hours based on TM-21. Atom does not list the projected or calculated LED lifetime, which is normally longer as TM-21 Addendum B explicitly states “The Calculated and Projected Lp(Dk) are not to be reported”. This Lifetime refers to the life of a single however the system life is longer since the probability and binomial distribution of all LEDs in the system means that the average LED is performing above the specification and compensates for the LEDs falling below. -
TM-21 Test Hours 9000 hrs
COLOUR TEMPERATURE
- Warm White (3000K K) 950 lm
- Cool White (4000K K) 1050 lm
- Daylight (5700K K) 1000 lm
DRIVER
WARRANTY
LINE DRAWINGS
AT9020/WH/TRI
PHOTOMETRIC
AT9020/WH/TRI/4000K
AT9020/WH/TRI/5700K
AT9020/WH/TRI/3000K
Information is subject to change without prior notice. Images are for illustrative purposes only. E&OE
FAQ
- Q: What is the input voltage for this downlight?
- A: The input voltage is 230Vac. In Australia, the voltage range is defined as 230Vac -6%/+10%, which means the voltage range for these products is 216Vac – 253Vac or 240V +6%.
- Q: What is the warranty period for domestic use?
- A: The warranty period for domestic use is 3 years of return to base (RTB).
- Q: Is the VIP warranty available to all users?
- A: The VIP warranty is available to registered users and is subject to additional terms and conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>